PlainWater

PORT KENT WD

PWS ID: NY1520370 · KEESEVILLE, New York 12944

PORT KENT WD serves 158 people in KEESEVILLE, New York using Surface Water water sources. It has 101 recorded EPA violations, including 27 health-based violations. No PFAS contamination was detected in UCMR5 testing.

Water Quality Snapshot: PORT KENT WD

PORT KENT WD is a local-owned community water system that delivers drinking water to 158 residents in KEESEVILLE, New York (Essex County) through 93 service connections. Its water is drawn from surface water sources. EPA's Safe Drinking Water Information System records 101 total violations for this system , of which 27 (27%) are health-based — meaning a contaminant exceeded an EPA Maximum Contaminant Level or a required treatment technique failed. A further 71 monitoring and reporting violations are on file. The most recent violation on record dates to 2012.

The most frequently cited contaminant at this system is Coliform (TCR), recorded in 28 violations (MR). This system has not yet been sampled under EPA's UCMR5 PFAS monitoring program, so no PFAS detection data is available here.

Across New York, EPA tracks 8,098 public water systems serving 19,294,951 people, with 552,003 cumulative violations and 26,817 health-based violations on record. About 94% of systems in the state carry at least one violation, and state-wide the average per system is 68.2 violations. PORT KENT WD's 101 violations sit above the New York average. Statewide, 129 of 332 UCMR5-tested systems have reported PFAS detections (38.9%). All figures above are sourced directly from EPA SDWIS and UCMR5 public data releases and are updated as EPA publishes new reporting cycles.

Population Served
158
Total Violations
101
Health-Based Violations
27
Water Source
Surface Water

System Details

System Type
Community
Owner Type
Local
Connections
93
County
Essex
School/Daycare
No
MCL Violations
18
Monitoring Violations
71
Treatment Tech Violations
9

Violation History

Contaminant violations recorded by EPA.

Contaminant Category Count Latest
Coliform (TCR) MR 28 2006
Total Haloacetic Acids (HAA5) MCL 18 2012
TTHM MR 14 2011
Lead and Copper Rule MR 12 2008
Total Haloacetic Acids (HAA5) MR 11 2011
Surface Water Treatment Rule TT 7 2006
Nitrate MR 4 1998
CARBON, TOTAL MR 2 2006
Stage 1 Disinfectants and Disinfection Byproducts Rule TT 2 2005

Verify This Water System

The figures above are aggregated from EPA's public databases. To verify the underlying records — or to file a complaint, request a Consumer Confidence Report, or check current monitoring status — go directly to the federal and state regulators that enforce the Safe Drinking Water Act for PORT KENT WD.

Federal Source of Truth

EPA SDWIS — Federal Reports

EPA's Safe Drinking Water Information System (SDWIS) holds the federal compliance record for every regulated public water system. Open the system-level report by PWS ID:

View PWS ID NY1520370 on SDWIS

Source: EPA SDWIS Federal Reports Search

State Regulator

New York Drinking Water Authority

New York State Department of Health — Public Water Systems is the primacy agency that licenses and inspects PORT KENT WD under EPA-delegated authority.

Open NY regulator portal

Source: New York State Department of Health — Public Water Systems

Violation Timeline

Each row links to the EPA SDWIS public record for verification. Cross-reference the contaminant code on EPA's federal report to see violation dates, return-to-compliance status, and enforcement actions.

Year (latest) Contaminant Category Count EPA Record
2012 Total Haloacetic Acids (HAA5) MCL 18 SDWIS / NY1520370 / 2456
2011 TTHM MR 14 SDWIS / NY1520370 / 2950
2011 Total Haloacetic Acids (HAA5) MR 11 SDWIS / NY1520370 / 2456
2008 Lead and Copper Rule MR 12 SDWIS / NY1520370 / 5000
2006 Coliform (TCR) MR 28 SDWIS / NY1520370 / 3100
2006 Surface Water Treatment Rule TT 7 SDWIS / NY1520370 / 0200
2006 CARBON, TOTAL MR 2 SDWIS / NY1520370 / 2920
2005 Stage 1 Disinfectants and Disinfection Byproducts Rule TT 2 SDWIS / NY1520370 / 0400
1998 Nitrate MR 4 SDWIS / NY1520370 / 1040

How PORT KENT WD Compares

Cross-reference this system's record against state averages and the federal MCL framework for context.

Metric PORT KENT WD New York avg Federal benchmark
Total violations 101 68.2 SDWA compliance — any non-zero count is a recorded breach
Health-based violations 27 3.3 Indicates a contaminant exceeded a federal MCL
PFAS detection None 38.9% EPA final rule (2024): PFOA/PFOS MCL = 4.0 ppt
Population served 158 2,383 Sizing context for compliance burden

Sources: EPA SDWIS and EPA National Primary Drinking Water Regulations (40 CFR Part 141). State averages computed across 8,098 regulated public water systems in New York.

Federal MCL reference — Safe Drinking Water Act thresholds
Contaminant Federal MCL / Action Level Note
Lead 0 mg/L (Action Level: 0.015 mg/L) Lead and Copper Rule treatment technique
Arsenic 0.010 mg/L (10 ppb) Health-based MCL since 2006
Total Coliform Treatment technique (RTCR) Indicator organism, monitoring trigger
PFOA / PFOS (PFAS) 4.0 ppt each (final 2024 rule) Compliance deadline 2029
Nitrate (as N) 10 mg/L Acute health risk for infants

Frequently Asked Questions

Is PORT KENT WD water safe to drink?
PORT KENT WD (PWS ID: NY1520370) has 101 recorded violations in the EPA SDWIS database. No PFAS contamination was detected in UCMR5 testing. This system serves 158 people using Surface Water sources.
How many people does PORT KENT WD serve?
PORT KENT WD serves 158 people in KEESEVILLE, New York. It is a Local-owned system using Surface Water water sources with 93 service connections.
What type of violations does PORT KENT WD have?
PORT KENT WD has 101 total violations: 27 health-based violations (MCL exceedances or treatment failures), 71 monitoring/reporting violations, and 9 treatment technique violations. Health-based violations indicate contaminant levels exceeded EPA safe limits.
Has PFAS been detected in PORT KENT WD water?
No PFAS testing data is available for PORT KENT WD under the EPA's UCMR5 monitoring program.
What water source does PORT KENT WD use?
PORT KENT WD uses Surface Water as its primary water source. It is classified as a Community Water System (CWS), serving residential populations year-round.
Where does this data come from?
All data comes from the EPA Safe Drinking Water Information System (SDWIS) and the UCMR5 PFAS monitoring program. SDWIS tracks compliance for all public water systems regulated under the Safe Drinking Water Act.

Explore PlainWater

Data Sources: EPA Safe Drinking Water Information System (SDWIS), Q4 2025. This data is provided for informational purposes only.

Related

Data sourced from $official public datasets. See our methodology for details. Retrieved and formatted by PlainWater Editorial