PlainWater

MILLERVILLE WATER & FIRE PRO AUTHORITY

PWS ID: AL0000270 · MILLERVILLE, Alabama 36251

MILLERVILLE WATER & FIRE PRO AUTHORITY serves 1,545 people in MILLERVILLE, Alabama using Surface Water water sources. It has 101 recorded EPA violations, including 18 health-based violations. No PFAS contamination was detected in UCMR5 testing.

Water Quality Snapshot: MILLERVILLE WATER & FIRE PRO AUTHORITY

MILLERVILLE WATER & FIRE PRO AUTHORITY is a local-owned community water system that delivers drinking water to 1,545 residents in MILLERVILLE, Alabama (Clay County) through 515 service connections. Its water is drawn from surface water sources. EPA's Safe Drinking Water Information System records 101 total violations for this system , of which 18 (18%) are health-based — meaning a contaminant exceeded an EPA Maximum Contaminant Level or a required treatment technique failed. A further 67 monitoring and reporting violations are on file. The most recent violation on record dates to 2022.

The most frequently cited contaminant at this system is TTHM, recorded in 32 violations (MR). This system has not yet been sampled under EPA's UCMR5 PFAS monitoring program, so no PFAS detection data is available here.

Across Alabama, EPA tracks 562 public water systems serving 6,193,356 people, with 40,486 cumulative violations and 3,786 health-based violations on record. About 99% of systems in the state carry at least one violation, and state-wide the average per system is 72 violations. MILLERVILLE WATER & FIRE PRO AUTHORITY's 101 violations sit above the Alabama average. Statewide, 157 of 306 UCMR5-tested systems have reported PFAS detections (51.3%). All figures above are sourced directly from EPA SDWIS and UCMR5 public data releases and are updated as EPA publishes new reporting cycles.

Population Served
1,545
Total Violations
101
Health-Based Violations
18
Water Source
Surface Water

System Details

System Type
Community
Owner Type
Local
Connections
515
County
Clay
School/Daycare
No
MCL Violations
18
Monitoring Violations
67
Treatment Tech Violations
0

Violation History

Contaminant violations recorded by EPA.

Contaminant Category Count Latest
TTHM MR 32 2017
Total Haloacetic Acids (HAA5) MR 32 2017
TTHM MCL 13 2022
Total Haloacetic Acids (HAA5) MCL 5 2008
Coliform (TCR) MR 3 1991
Public Notice Other 2 2009
Revised Total Coliform Rule RPT 2 2021

Verify This Water System

The figures above are aggregated from EPA's public databases. To verify the underlying records — or to file a complaint, request a Consumer Confidence Report, or check current monitoring status — go directly to the federal and state regulators that enforce the Safe Drinking Water Act for MILLERVILLE WATER & FIRE PRO AUTHORITY.

Federal Source of Truth

EPA SDWIS — Federal Reports

EPA's Safe Drinking Water Information System (SDWIS) holds the federal compliance record for every regulated public water system. Open the system-level report by PWS ID:

View PWS ID AL0000270 on SDWIS

Source: EPA SDWIS Federal Reports Search

State Regulator

Alabama Drinking Water Authority

Alabama's primacy agency administers the Safe Drinking Water Act locally. Search EPA SDWIS for the current state contact, or use the state's public health or environment department portal.

Find AL regulator via EPA SDWIS

Violation Timeline

Each row links to the EPA SDWIS public record for verification. Cross-reference the contaminant code on EPA's federal report to see violation dates, return-to-compliance status, and enforcement actions.

Year (latest) Contaminant Category Count EPA Record
2022 TTHM MCL 13 SDWIS / AL0000270 / 2950
2021 Revised Total Coliform Rule RPT 2 SDWIS / AL0000270 / 8000
2017 TTHM MR 32 SDWIS / AL0000270 / 2950
2017 Total Haloacetic Acids (HAA5) MR 32 SDWIS / AL0000270 / 2456
2009 Public Notice Other 2 SDWIS / AL0000270 / 7500
2008 Total Haloacetic Acids (HAA5) MCL 5 SDWIS / AL0000270 / 2456
1991 Coliform (TCR) MR 3 SDWIS / AL0000270 / 3100

How MILLERVILLE WATER & FIRE PRO AUTHORITY Compares

Cross-reference this system's record against state averages and the federal MCL framework for context.

Metric MILLERVILLE WATER & FIRE PRO AUTHORITY Alabama avg Federal benchmark
Total violations 101 72 SDWA compliance — any non-zero count is a recorded breach
Health-based violations 18 6.7 Indicates a contaminant exceeded a federal MCL
PFAS detection None 51.3% EPA final rule (2024): PFOA/PFOS MCL = 4.0 ppt
Population served 1,545 11,020 Sizing context for compliance burden

Sources: EPA SDWIS and EPA National Primary Drinking Water Regulations (40 CFR Part 141). State averages computed across 562 regulated public water systems in Alabama.

Federal MCL reference — Safe Drinking Water Act thresholds
Contaminant Federal MCL / Action Level Note
Lead 0 mg/L (Action Level: 0.015 mg/L) Lead and Copper Rule treatment technique
Arsenic 0.010 mg/L (10 ppb) Health-based MCL since 2006
Total Coliform Treatment technique (RTCR) Indicator organism, monitoring trigger
PFOA / PFOS (PFAS) 4.0 ppt each (final 2024 rule) Compliance deadline 2029
Nitrate (as N) 10 mg/L Acute health risk for infants

Frequently Asked Questions

Is MILLERVILLE WATER & FIRE PRO AUTHORITY water safe to drink?
MILLERVILLE WATER & FIRE PRO AUTHORITY (PWS ID: AL0000270) has 101 recorded violations in the EPA SDWIS database. No PFAS contamination was detected in UCMR5 testing. This system serves 1,545 people using Surface Water sources.
How many people does MILLERVILLE WATER & FIRE PRO AUTHORITY serve?
MILLERVILLE WATER & FIRE PRO AUTHORITY serves 1,545 people in MILLERVILLE, Alabama. It is a Local-owned system using Surface Water water sources with 515 service connections.
What type of violations does MILLERVILLE WATER & FIRE PRO AUTHORITY have?
MILLERVILLE WATER & FIRE PRO AUTHORITY has 101 total violations: 18 health-based violations (MCL exceedances or treatment failures), 67 monitoring/reporting violations, and 0 treatment technique violations. Health-based violations indicate contaminant levels exceeded EPA safe limits.
Has PFAS been detected in MILLERVILLE WATER & FIRE PRO AUTHORITY water?
No PFAS testing data is available for MILLERVILLE WATER & FIRE PRO AUTHORITY under the EPA's UCMR5 monitoring program.
What water source does MILLERVILLE WATER & FIRE PRO AUTHORITY use?
MILLERVILLE WATER & FIRE PRO AUTHORITY uses Surface Water as its primary water source. It is classified as a Community Water System (CWS), serving residential populations year-round.
Where does this data come from?
All data comes from the EPA Safe Drinking Water Information System (SDWIS) and the UCMR5 PFAS monitoring program. SDWIS tracks compliance for all public water systems regulated under the Safe Drinking Water Act.

Explore PlainWater

Data Sources: EPA Safe Drinking Water Information System (SDWIS), Q4 2025. This data is provided for informational purposes only.

Related

Data sourced from $official public datasets. See our methodology for details. Retrieved and formatted by Kiznis Studio Editorial