PlainWater

MOUNTAIN VILLAGE

PWS ID: OR4101105 · MELBA, Oregon 83641

MOUNTAIN VILLAGE serves 60 people in MELBA, Oregon using Groundwater water sources. It has 53 recorded EPA violations, including 20 health-based violations. No PFAS contamination was detected in UCMR5 testing.

Water Quality Snapshot: MOUNTAIN VILLAGE

MOUNTAIN VILLAGE is a private-owned community water system that delivers drinking water to 60 residents in MELBA, Oregon (Jackson County) through 35 service connections. Its water is drawn from groundwater sources. EPA's Safe Drinking Water Information System records 53 total violations for this system , of which 20 (38%) are health-based — meaning a contaminant exceeded an EPA Maximum Contaminant Level or a required treatment technique failed. A further 23 monitoring and reporting violations are on file. The most recent violation on record dates to 2024.

The most frequently cited contaminant at this system is Coliform (TCR), recorded in 20 violations (MCL, health-based). This system has not yet been sampled under EPA's UCMR5 PFAS monitoring program, so no PFAS detection data is available here.

Across Oregon, EPA tracks 2,518 public water systems serving 4,005,242 people, with 206,659 cumulative violations and 20,339 health-based violations on record. About 99% of systems in the state carry at least one violation, and state-wide the average per system is 82.1 violations. MOUNTAIN VILLAGE's 53 violations sit below the Oregon average. Statewide, 30 of 125 UCMR5-tested systems have reported PFAS detections (24%). All figures above are sourced directly from EPA SDWIS and UCMR5 public data releases and are updated as EPA publishes new reporting cycles.

Population Served
60
Total Violations
53
Health-Based Violations
20
Water Source
Groundwater

System Details

System Type
Community
Owner Type
Private
Connections
35
County
Jackson
School/Daycare
No
MCL Violations
20
Monitoring Violations
23
Treatment Tech Violations
0

Violation History

Contaminant violations recorded by EPA.

Contaminant Category Count Latest
Coliform (TCR) MCL 20 2012
Coliform (TCR) MR 16 2006
Consumer Confidence Rule Other 3 2004
Public Notice Other 2 2012
Lead and Copper Rule MR 2 2013
Combined Radium (-226 and -228) MR 2 2008
Gross Alpha, Excl. Radon and U MR 2 2011
Revised Total Coliform Rule MON 1 2024

Verify This Water System

The figures above are aggregated from EPA's public databases. To verify the underlying records — or to file a complaint, request a Consumer Confidence Report, or check current monitoring status — go directly to the federal and state regulators that enforce the Safe Drinking Water Act for MOUNTAIN VILLAGE.

Federal Source of Truth

EPA SDWIS — Federal Reports

EPA's Safe Drinking Water Information System (SDWIS) holds the federal compliance record for every regulated public water system. Open the system-level report by PWS ID:

View PWS ID OR4101105 on SDWIS

Source: EPA SDWIS Federal Reports Search

State Regulator

Oregon Drinking Water Authority

Oregon's primacy agency administers the Safe Drinking Water Act locally. Search EPA SDWIS for the current state contact, or use the state's public health or environment department portal.

Find OR regulator via EPA SDWIS

Violation Timeline

Each row links to the EPA SDWIS public record for verification. Cross-reference the contaminant code on EPA's federal report to see violation dates, return-to-compliance status, and enforcement actions.

Year (latest) Contaminant Category Count EPA Record
2024 Revised Total Coliform Rule MON 1 SDWIS / OR4101105 / 8000
2013 Lead and Copper Rule MR 2 SDWIS / OR4101105 / 5000
2012 Coliform (TCR) MCL 20 SDWIS / OR4101105 / 3100
2012 Public Notice Other 2 SDWIS / OR4101105 / 7500
2011 Gross Alpha, Excl. Radon and U MR 2 SDWIS / OR4101105 / 4000
2008 Combined Radium (-226 and -228) MR 2 SDWIS / OR4101105 / 4010
2006 Coliform (TCR) MR 16 SDWIS / OR4101105 / 3100
2004 Consumer Confidence Rule Other 3 SDWIS / OR4101105 / 7000

How MOUNTAIN VILLAGE Compares

Cross-reference this system's record against state averages and the federal MCL framework for context.

Metric MOUNTAIN VILLAGE Oregon avg Federal benchmark
Total violations 53 82.1 SDWA compliance — any non-zero count is a recorded breach
Health-based violations 20 8.1 Indicates a contaminant exceeded a federal MCL
PFAS detection None 24% EPA final rule (2024): PFOA/PFOS MCL = 4.0 ppt
Population served 60 1,591 Sizing context for compliance burden

Sources: EPA SDWIS and EPA National Primary Drinking Water Regulations (40 CFR Part 141). State averages computed across 2,518 regulated public water systems in Oregon.

Federal MCL reference — Safe Drinking Water Act thresholds
Contaminant Federal MCL / Action Level Note
Lead 0 mg/L (Action Level: 0.015 mg/L) Lead and Copper Rule treatment technique
Arsenic 0.010 mg/L (10 ppb) Health-based MCL since 2006
Total Coliform Treatment technique (RTCR) Indicator organism, monitoring trigger
PFOA / PFOS (PFAS) 4.0 ppt each (final 2024 rule) Compliance deadline 2029
Nitrate (as N) 10 mg/L Acute health risk for infants

Frequently Asked Questions

Is MOUNTAIN VILLAGE water safe to drink?
MOUNTAIN VILLAGE (PWS ID: OR4101105) has 53 recorded violations in the EPA SDWIS database. No PFAS contamination was detected in UCMR5 testing. This system serves 60 people using Groundwater sources.
How many people does MOUNTAIN VILLAGE serve?
MOUNTAIN VILLAGE serves 60 people in MELBA, Oregon. It is a Private-owned system using Groundwater water sources with 35 service connections.
What type of violations does MOUNTAIN VILLAGE have?
MOUNTAIN VILLAGE has 53 total violations: 20 health-based violations (MCL exceedances or treatment failures), 23 monitoring/reporting violations, and 0 treatment technique violations. Health-based violations indicate contaminant levels exceeded EPA safe limits.
Has PFAS been detected in MOUNTAIN VILLAGE water?
No PFAS testing data is available for MOUNTAIN VILLAGE under the EPA's UCMR5 monitoring program.
What water source does MOUNTAIN VILLAGE use?
MOUNTAIN VILLAGE uses Groundwater as its primary water source. It is classified as a Community Water System (CWS), serving residential populations year-round.
Where does this data come from?
All data comes from the EPA Safe Drinking Water Information System (SDWIS) and the UCMR5 PFAS monitoring program. SDWIS tracks compliance for all public water systems regulated under the Safe Drinking Water Act.

Explore PlainWater

Data Sources: EPA Safe Drinking Water Information System (SDWIS), Q4 2025. This data is provided for informational purposes only.

Related

Data sourced from $official public datasets. See our methodology for details. Retrieved and formatted by PlainWater Editorial