PlainWater

INDULGE SWEETS & TREATS

PWS ID: NY3702968 · WILLIAMSTOWN, New York 13493

INDULGE SWEETS & TREATS serves 25 people in WILLIAMSTOWN, New York using Groundwater water sources. It has 69 recorded EPA violations, including 0 health-based violations. No PFAS contamination was detected in UCMR5 testing.

Water Quality Snapshot: INDULGE SWEETS & TREATS

INDULGE SWEETS & TREATS is a local-owned transient non-community water system that delivers drinking water to 25 residents in WILLIAMSTOWN, New York (Oswego County) through 1 service connections. Its water is drawn from groundwater sources. EPA's Safe Drinking Water Information System records 69 total violations for this system , of which 0 (0%) are health-based — meaning a contaminant exceeded an EPA Maximum Contaminant Level or a required treatment technique failed. A further 29 monitoring and reporting violations are on file. The most recent violation on record dates to 2006.

The most frequently cited contaminant at this system is Nitrate, recorded in 5 violations (MR). This system has not yet been sampled under EPA's UCMR5 PFAS monitoring program, so no PFAS detection data is available here.

Across New York, EPA tracks 8,098 public water systems serving 19,294,951 people, with 552,003 cumulative violations and 26,817 health-based violations on record. About 94% of systems in the state carry at least one violation, and state-wide the average per system is 68.2 violations. INDULGE SWEETS & TREATS's 69 violations sit above the New York average. Statewide, 129 of 332 UCMR5-tested systems have reported PFAS detections (38.9%). All figures above are sourced directly from EPA SDWIS and UCMR5 public data releases and are updated as EPA publishes new reporting cycles.

Population Served
25
Total Violations
69
Health-Based Violations
0
Water Source
Groundwater

System Details

System Type
Transient Non-Community
Owner Type
Local
Connections
1
County
Oswego
School/Daycare
Yes
MCL Violations
0
Monitoring Violations
29
Treatment Tech Violations
0

Violation History

Contaminant violations recorded by EPA.

Contaminant Category Count Latest
Nitrate MR 5 2006
Coliform (TCR) MR 5 2006
Lead and Copper Rule MR 5 1996
Mercury MR 2 1993
Cadmium MR 2 1993
Barium MR 2 1993
Chromium MR 2 1993
Selenium MR 2 1993
Fluoride MR 2 1993
Arsenic MR 2 1993

Verify This Water System

The figures above are aggregated from EPA's public databases. To verify the underlying records — or to file a complaint, request a Consumer Confidence Report, or check current monitoring status — go directly to the federal and state regulators that enforce the Safe Drinking Water Act for INDULGE SWEETS & TREATS.

Federal Source of Truth

EPA SDWIS — Federal Reports

EPA's Safe Drinking Water Information System (SDWIS) holds the federal compliance record for every regulated public water system. Open the system-level report by PWS ID:

View PWS ID NY3702968 on SDWIS

Source: EPA SDWIS Federal Reports Search

State Regulator

New York Drinking Water Authority

New York State Department of Health — Public Water Systems is the primacy agency that licenses and inspects INDULGE SWEETS & TREATS under EPA-delegated authority.

Open NY regulator portal

Source: New York State Department of Health — Public Water Systems

Violation Timeline

Each row links to the EPA SDWIS public record for verification. Cross-reference the contaminant code on EPA's federal report to see violation dates, return-to-compliance status, and enforcement actions.

Year (latest) Contaminant Category Count EPA Record
2006 Nitrate MR 5 SDWIS / NY3702968 / 1040
2006 Coliform (TCR) MR 5 SDWIS / NY3702968 / 3100
1996 Lead and Copper Rule MR 5 SDWIS / NY3702968 / 5000
1993 Mercury MR 2 SDWIS / NY3702968 / 1035
1993 Cadmium MR 2 SDWIS / NY3702968 / 1015
1993 Barium MR 2 SDWIS / NY3702968 / 1010
1993 Chromium MR 2 SDWIS / NY3702968 / 1020
1993 Selenium MR 2 SDWIS / NY3702968 / 1045
1993 Fluoride MR 2 SDWIS / NY3702968 / 1025
1993 Arsenic MR 2 SDWIS / NY3702968 / 1005

How INDULGE SWEETS & TREATS Compares

Cross-reference this system's record against state averages and the federal MCL framework for context.

Metric INDULGE SWEETS & TREATS New York avg Federal benchmark
Total violations 69 68.2 SDWA compliance — any non-zero count is a recorded breach
Health-based violations 0 3.3 Indicates a contaminant exceeded a federal MCL
PFAS detection None 38.9% EPA final rule (2024): PFOA/PFOS MCL = 4.0 ppt
Population served 25 2,383 Sizing context for compliance burden

Sources: EPA SDWIS and EPA National Primary Drinking Water Regulations (40 CFR Part 141). State averages computed across 8,098 regulated public water systems in New York.

Federal MCL reference — Safe Drinking Water Act thresholds
Contaminant Federal MCL / Action Level Note
Lead 0 mg/L (Action Level: 0.015 mg/L) Lead and Copper Rule treatment technique
Arsenic 0.010 mg/L (10 ppb) Health-based MCL since 2006
Total Coliform Treatment technique (RTCR) Indicator organism, monitoring trigger
PFOA / PFOS (PFAS) 4.0 ppt each (final 2024 rule) Compliance deadline 2029
Nitrate (as N) 10 mg/L Acute health risk for infants

Frequently Asked Questions

Is INDULGE SWEETS & TREATS water safe to drink?
INDULGE SWEETS & TREATS (PWS ID: NY3702968) has 69 recorded violations in the EPA SDWIS database. No PFAS contamination was detected in UCMR5 testing. This system serves 25 people using Groundwater sources.
How many people does INDULGE SWEETS & TREATS serve?
INDULGE SWEETS & TREATS serves 25 people in WILLIAMSTOWN, New York. It is a Local-owned system using Groundwater water sources with 1 service connections.
What type of violations does INDULGE SWEETS & TREATS have?
INDULGE SWEETS & TREATS has 69 total violations: 0 health-based violations (MCL exceedances or treatment failures), 29 monitoring/reporting violations, and 0 treatment technique violations. Health-based violations indicate contaminant levels exceeded EPA safe limits.
Has PFAS been detected in INDULGE SWEETS & TREATS water?
No PFAS testing data is available for INDULGE SWEETS & TREATS under the EPA's UCMR5 monitoring program.
What water source does INDULGE SWEETS & TREATS use?
INDULGE SWEETS & TREATS uses Groundwater as its primary water source. It is classified as a Transient Non-Community Water System, serving transient populations.
Where does this data come from?
All data comes from the EPA Safe Drinking Water Information System (SDWIS) and the UCMR5 PFAS monitoring program. SDWIS tracks compliance for all public water systems regulated under the Safe Drinking Water Act.

Explore PlainWater

Data Sources: EPA Safe Drinking Water Information System (SDWIS), Q4 2025. This data is provided for informational purposes only.

Related

Data sourced from $official public datasets. See our methodology for details. Retrieved and formatted by PlainWater Editorial