PlainWater

CLAYTON INDUSTRIES INC

PWS ID: NJ0511330 · SEAVILLE, New Jersey 08230

CLAYTON INDUSTRIES INC serves 55 people in SEAVILLE, New Jersey using Groundwater water sources. It has 8 recorded EPA violations, including 0 health-based violations. No PFAS contamination was detected in UCMR5 testing.

Water Quality Snapshot: CLAYTON INDUSTRIES INC

CLAYTON INDUSTRIES INC is a private-owned non-transient non-community water system that delivers drinking water to 55 residents in SEAVILLE, New Jersey (Cape May County) through 33 service connections. Its water is drawn from groundwater sources. EPA's Safe Drinking Water Information System records 8 total violations for this system , of which 0 (0%) are health-based — meaning a contaminant exceeded an EPA Maximum Contaminant Level or a required treatment technique failed. A further 6 monitoring and reporting violations are on file. The most recent violation on record dates to 1997.

The most frequently cited contaminant at this system is Coliform (TCR), recorded in 4 violations (MR). This system has not yet been sampled under EPA's UCMR5 PFAS monitoring program, so no PFAS detection data is available here.

Across New Jersey, EPA tracks 3,428 public water systems serving 9,570,926 people, with 204,988 cumulative violations and 22,229 health-based violations on record. About 95% of systems in the state carry at least one violation, and state-wide the average per system is 59.8 violations. CLAYTON INDUSTRIES INC's 8 violations sit below the New Jersey average. Statewide, 208 of 264 UCMR5-tested systems have reported PFAS detections (78.8%). All figures above are sourced directly from EPA SDWIS and UCMR5 public data releases and are updated as EPA publishes new reporting cycles.

Population Served
55
Total Violations
8
Health-Based Violations
0
Water Source
Groundwater

System Details

System Type
Non-Transient Non-Community
Owner Type
Private
Connections
33
County
Cape May
School/Daycare
No
MCL Violations
0
Monitoring Violations
6
Treatment Tech Violations
0

Violation History

Contaminant violations recorded by EPA.

Contaminant Category Count Latest
Coliform (TCR) MR 4 1996
Lead and Copper Rule MR 1 1994
Nitrate MR 1 1997

Verify This Water System

The figures above are aggregated from EPA's public databases. To verify the underlying records — or to file a complaint, request a Consumer Confidence Report, or check current monitoring status — go directly to the federal and state regulators that enforce the Safe Drinking Water Act for CLAYTON INDUSTRIES INC.

Federal Source of Truth

EPA SDWIS — Federal Reports

EPA's Safe Drinking Water Information System (SDWIS) holds the federal compliance record for every regulated public water system. Open the system-level report by PWS ID:

View PWS ID NJ0511330 on SDWIS

Source: EPA SDWIS Federal Reports Search

State Regulator

New Jersey Drinking Water Authority

NJ DEP — Bureau of Safe Drinking Water is the primacy agency that licenses and inspects CLAYTON INDUSTRIES INC under EPA-delegated authority.

Open NJ regulator portal

Source: NJ DEP — Bureau of Safe Drinking Water

Violation Timeline

Each row links to the EPA SDWIS public record for verification. Cross-reference the contaminant code on EPA's federal report to see violation dates, return-to-compliance status, and enforcement actions.

Year (latest) Contaminant Category Count EPA Record
1997 Nitrate MR 1 SDWIS / NJ0511330 / 1040
1996 Coliform (TCR) MR 4 SDWIS / NJ0511330 / 3100
1994 Lead and Copper Rule MR 1 SDWIS / NJ0511330 / 5000

How CLAYTON INDUSTRIES INC Compares

Cross-reference this system's record against state averages and the federal MCL framework for context.

Metric CLAYTON INDUSTRIES INC New Jersey avg Federal benchmark
Total violations 8 59.8 SDWA compliance — any non-zero count is a recorded breach
Health-based violations 0 6.5 Indicates a contaminant exceeded a federal MCL
PFAS detection None 78.8% EPA final rule (2024): PFOA/PFOS MCL = 4.0 ppt
Population served 55 2,792 Sizing context for compliance burden

Sources: EPA SDWIS and EPA National Primary Drinking Water Regulations (40 CFR Part 141). State averages computed across 3,428 regulated public water systems in New Jersey.

Federal MCL reference — Safe Drinking Water Act thresholds
Contaminant Federal MCL / Action Level Note
Lead 0 mg/L (Action Level: 0.015 mg/L) Lead and Copper Rule treatment technique
Arsenic 0.010 mg/L (10 ppb) Health-based MCL since 2006
Total Coliform Treatment technique (RTCR) Indicator organism, monitoring trigger
PFOA / PFOS (PFAS) 4.0 ppt each (final 2024 rule) Compliance deadline 2029
Nitrate (as N) 10 mg/L Acute health risk for infants

Frequently Asked Questions

Is CLAYTON INDUSTRIES INC water safe to drink?
CLAYTON INDUSTRIES INC (PWS ID: NJ0511330) has 8 recorded violations in the EPA SDWIS database. No PFAS contamination was detected in UCMR5 testing. This system serves 55 people using Groundwater sources.
How many people does CLAYTON INDUSTRIES INC serve?
CLAYTON INDUSTRIES INC serves 55 people in SEAVILLE, New Jersey. It is a Private-owned system using Groundwater water sources with 33 service connections.
What type of violations does CLAYTON INDUSTRIES INC have?
CLAYTON INDUSTRIES INC has 8 total violations: 0 health-based violations (MCL exceedances or treatment failures), 6 monitoring/reporting violations, and 0 treatment technique violations. Health-based violations indicate contaminant levels exceeded EPA safe limits.
Has PFAS been detected in CLAYTON INDUSTRIES INC water?
No PFAS testing data is available for CLAYTON INDUSTRIES INC under the EPA's UCMR5 monitoring program.
What water source does CLAYTON INDUSTRIES INC use?
CLAYTON INDUSTRIES INC uses Groundwater as its primary water source. It is classified as a Non-Transient Non-Community Water System, serving the same people for at least 6 months per year.
Where does this data come from?
All data comes from the EPA Safe Drinking Water Information System (SDWIS) and the UCMR5 PFAS monitoring program. SDWIS tracks compliance for all public water systems regulated under the Safe Drinking Water Act.

Explore PlainWater

Data Sources: EPA Safe Drinking Water Information System (SDWIS), Q4 2025. This data is provided for informational purposes only.

Related

Data sourced from $official public datasets. See our methodology for details. Retrieved and formatted by PlainWater Editorial