PlainWater

WANCHESE MARINE INDUSTRIAL PARK

PWS ID: NC0428462 · WANCHESE, North Carolina 27981

WANCHESE MARINE INDUSTRIAL PARK serves 280 people in WANCHESE, North Carolina using Groundwater water sources. It has 78 recorded EPA violations, including 10 health-based violations. No PFAS contamination was detected in UCMR5 testing.

Water Quality Snapshot: WANCHESE MARINE INDUSTRIAL PARK

WANCHESE MARINE INDUSTRIAL PARK is a state-owned non-transient non-community water system that delivers drinking water to 280 residents in WANCHESE, North Carolina (Dare County) through 36 service connections. Its water is drawn from groundwater sources. EPA's Safe Drinking Water Information System records 78 total violations for this system , of which 10 (13%) are health-based — meaning a contaminant exceeded an EPA Maximum Contaminant Level or a required treatment technique failed. A further 45 monitoring and reporting violations are on file. The most recent violation on record dates to 2024.

The most frequently cited contaminant at this system is Coliform (TCR), recorded in 15 violations (MR). This system has not yet been sampled under EPA's UCMR5 PFAS monitoring program, so no PFAS detection data is available here.

Across North Carolina, EPA tracks 5,020 public water systems serving 9,877,724 people, with 524,053 cumulative violations and 38,492 health-based violations on record. About 93% of systems in the state carry at least one violation, and state-wide the average per system is 104.4 violations. WANCHESE MARINE INDUSTRIAL PARK's 78 violations sit below the North Carolina average. Statewide, 174 of 287 UCMR5-tested systems have reported PFAS detections (60.6%). All figures above are sourced directly from EPA SDWIS and UCMR5 public data releases and are updated as EPA publishes new reporting cycles.

Population Served
280
Total Violations
78
Health-Based Violations
10
Water Source
Groundwater

System Details

System Type
Non-Transient Non-Community
Owner Type
State
Connections
36
County
Dare
School/Daycare
No
MCL Violations
10
Monitoring Violations
45
Treatment Tech Violations
0

Violation History

Contaminant violations recorded by EPA.

Contaminant Category Count Latest
Coliform (TCR) MR 15 2007
Public Notice Other 13 2018
TTHM MR 10 2020
TTHM MCL 10 2018
Revised Total Coliform Rule RPT 10 2024
Total Haloacetic Acids (HAA5) MR 9 2020
Chlorine MR 6 2007
Lead and Copper Rule MR 5 2023

Verify This Water System

The figures above are aggregated from EPA's public databases. To verify the underlying records — or to file a complaint, request a Consumer Confidence Report, or check current monitoring status — go directly to the federal and state regulators that enforce the Safe Drinking Water Act for WANCHESE MARINE INDUSTRIAL PARK.

Federal Source of Truth

EPA SDWIS — Federal Reports

EPA's Safe Drinking Water Information System (SDWIS) holds the federal compliance record for every regulated public water system. Open the system-level report by PWS ID:

View PWS ID NC0428462 on SDWIS

Source: EPA SDWIS Federal Reports Search

State Regulator

North Carolina Drinking Water Authority

North Carolina DEQ — Public Water Supply Section is the primacy agency that licenses and inspects WANCHESE MARINE INDUSTRIAL PARK under EPA-delegated authority.

Open NC regulator portal

Source: North Carolina DEQ — Public Water Supply Section

Violation Timeline

Each row links to the EPA SDWIS public record for verification. Cross-reference the contaminant code on EPA's federal report to see violation dates, return-to-compliance status, and enforcement actions.

Year (latest) Contaminant Category Count EPA Record
2024 Revised Total Coliform Rule RPT 10 SDWIS / NC0428462 / 8000
2023 Lead and Copper Rule MR 5 SDWIS / NC0428462 / 5000
2020 TTHM MR 10 SDWIS / NC0428462 / 2950
2020 Total Haloacetic Acids (HAA5) MR 9 SDWIS / NC0428462 / 2456
2018 Public Notice Other 13 SDWIS / NC0428462 / 7500
2018 TTHM MCL 10 SDWIS / NC0428462 / 2950
2007 Coliform (TCR) MR 15 SDWIS / NC0428462 / 3100
2007 Chlorine MR 6 SDWIS / NC0428462 / 0999

How WANCHESE MARINE INDUSTRIAL PARK Compares

Cross-reference this system's record against state averages and the federal MCL framework for context.

Metric WANCHESE MARINE INDUSTRIAL PARK North Carolina avg Federal benchmark
Total violations 78 104.4 SDWA compliance — any non-zero count is a recorded breach
Health-based violations 10 7.7 Indicates a contaminant exceeded a federal MCL
PFAS detection None 60.6% EPA final rule (2024): PFOA/PFOS MCL = 4.0 ppt
Population served 280 1,968 Sizing context for compliance burden

Sources: EPA SDWIS and EPA National Primary Drinking Water Regulations (40 CFR Part 141). State averages computed across 5,020 regulated public water systems in North Carolina.

Federal MCL reference — Safe Drinking Water Act thresholds
Contaminant Federal MCL / Action Level Note
Lead 0 mg/L (Action Level: 0.015 mg/L) Lead and Copper Rule treatment technique
Arsenic 0.010 mg/L (10 ppb) Health-based MCL since 2006
Total Coliform Treatment technique (RTCR) Indicator organism, monitoring trigger
PFOA / PFOS (PFAS) 4.0 ppt each (final 2024 rule) Compliance deadline 2029
Nitrate (as N) 10 mg/L Acute health risk for infants

Frequently Asked Questions

Is WANCHESE MARINE INDUSTRIAL PARK water safe to drink?
WANCHESE MARINE INDUSTRIAL PARK (PWS ID: NC0428462) has 78 recorded violations in the EPA SDWIS database. No PFAS contamination was detected in UCMR5 testing. This system serves 280 people using Groundwater sources.
How many people does WANCHESE MARINE INDUSTRIAL PARK serve?
WANCHESE MARINE INDUSTRIAL PARK serves 280 people in WANCHESE, North Carolina. It is a State-owned system using Groundwater water sources with 36 service connections.
What type of violations does WANCHESE MARINE INDUSTRIAL PARK have?
WANCHESE MARINE INDUSTRIAL PARK has 78 total violations: 10 health-based violations (MCL exceedances or treatment failures), 45 monitoring/reporting violations, and 0 treatment technique violations. Health-based violations indicate contaminant levels exceeded EPA safe limits.
Has PFAS been detected in WANCHESE MARINE INDUSTRIAL PARK water?
No PFAS testing data is available for WANCHESE MARINE INDUSTRIAL PARK under the EPA's UCMR5 monitoring program.
What water source does WANCHESE MARINE INDUSTRIAL PARK use?
WANCHESE MARINE INDUSTRIAL PARK uses Groundwater as its primary water source. It is classified as a Non-Transient Non-Community Water System, serving the same people for at least 6 months per year.
Where does this data come from?
All data comes from the EPA Safe Drinking Water Information System (SDWIS) and the UCMR5 PFAS monitoring program. SDWIS tracks compliance for all public water systems regulated under the Safe Drinking Water Act.

Explore PlainWater

Data Sources: EPA Safe Drinking Water Information System (SDWIS), Q4 2025. This data is provided for informational purposes only.

Related

Data sourced from $official public datasets. See our methodology for details. Retrieved and formatted by PlainWater Editorial