PlainWater

Community Water System · PWS KY0540656

Hanson Water System

Hanson, Kentucky 42413 - drinking water served from surface water sources to 2,157 people, tracked in EPA SDWIS and UCMR5.

2,157
People served
150
EPA violations
81
Health-based
Untested
UCMR5 result

The verdict

EPA records 150 drinking-water violations at Hanson Water System, 54% of them health-based - below the Kentucky per-system average.

150
Total EPA violations on record
54%
Health-based (MCL / treatment failure)
2,157
People served by this system
N/A
PFAS compounds detected (UCMR5)

Water Quality Snapshot: Hanson Water System

Hanson Water System is a local-owned community water system that delivers drinking water to 2,157 residents in Hanson, Kentucky (Hopkins County) through 519 service connections. Its water is drawn from surface water sources. EPA's Safe Drinking Water Information System records 150 total violations for this system , of which 81 (54%) are health-based, meaning a contaminant exceeded an EPA Maximum Contaminant Level or a required treatment technique failed. A further 64 monitoring and reporting violations are on file. The most recent violation on record dates to 2024.

The most frequently cited contaminant at this system is TTHM, recorded in 81 violations (MCL, health-based). This system has not yet been sampled under EPA's UCMR5 PFAS monitoring program, so no PFAS detection data is available here.

Across Kentucky, EPA tracks 424 public water systems serving 4,570,541 people, with 80,482 cumulative violations and 12,554 health-based violations on record. About 99% of systems in the state carry at least one violation, and state-wide the average per system is 189.8 violations. Statewide, 107 of 231 UCMR5-tested systems have reported PFAS detections (46.3%).

Hanson Water System's 150 violations sit below the Kentucky average.

All figures above are sourced directly from EPA SDWIS and UCMR5 public data releases and are updated as EPA publishes new reporting cycles.

Population Served
2,157
Total Violations
150
Health-Based Violations
81
Water Source
Surface Water

System Details

System Type
Community
Owner Type
Local
Connections
519
County
Hopkins
School/Daycare
No
MCL Violations
81
Monitoring Violations
64
Treatment Tech Violations
0

Violation History

Contaminant violations recorded by EPA.

Contaminant Category Count Latest
TTHM MCL 81 2024
Coliform (TCR) MR 43 2012
Lead and Copper Rule MR 13 2002
Revised Total Coliform Rule MON 8 2022

Verify This Water System

The figures above are aggregated from EPA's public databases. To verify the underlying records, or to file a complaint, request a Consumer Confidence Report, or check current monitoring status, go directly to the federal and state regulators that enforce the Safe Drinking Water Act for Hanson Water System.

Federal Source of Truth

EPA SDWIS, Federal Reports

EPA's Safe Drinking Water Information System (SDWIS) holds the federal compliance record for every regulated public water system. Open the system-level report by PWS ID:

View PWS ID KY0540656 on SDWIS

Source: EPA SDWIS Federal Reports Search

State Regulator

Kentucky Drinking Water Authority

Kentucky's primacy agency administers the Safe Drinking Water Act locally. Search EPA SDWIS for the current state contact, or use the state's public health or environment department portal.

Find KY regulator via EPA SDWIS

Violation Timeline

Each row links to the EPA SDWIS public record for verification. Cross-reference the contaminant code on EPA's federal report to see violation dates, return-to-compliance status, and enforcement actions.

Year (latest) Contaminant Category Count EPA Record
2024 TTHM MCL 81 SDWIS / KY0540656 / 2950
2022 Revised Total Coliform Rule MON 8 SDWIS / KY0540656 / 8000
2012 Coliform (TCR) MR 43 SDWIS / KY0540656 / 3100
2002 Lead and Copper Rule MR 13 SDWIS / KY0540656 / 5000

How Hanson Water System Compares

Cross-reference this system's record against state averages and the federal MCL framework for context.

Metric Hanson Water System Kentucky avg Federal benchmark
Total violations 150 189.8 SDWA compliance, any non-zero count is a recorded breach
Health-based violations 81 29.6 Indicates a contaminant exceeded a federal MCL
PFAS detection None 46.3% EPA final rule (2024): PFOA/PFOS MCL = 4.0 ppt
Population served 2,157 10,780 Sizing context for compliance burden

Sources: EPA SDWIS and EPA National Primary Drinking Water Regulations (40 CFR Part 141). State averages computed across 424 regulated public water systems in Kentucky.

Federal MCL reference, Safe Drinking Water Act thresholds
Contaminant Federal MCL / Action Level Note
Lead 0 mg/L (Action Level: 0.015 mg/L) Lead and Copper Rule treatment technique
Arsenic 0.010 mg/L (10 ppb) Health-based MCL since 2006
Total Coliform Treatment technique (RTCR) Indicator organism, monitoring trigger
PFOA / PFOS (PFAS) 4.0 ppt each (final 2024 rule) Compliance deadline 2029 (EPA proposed extending to 2031, not yet final as of May 2026)
Nitrate (as N) 10 mg/L Acute health risk for infants

Frequently Asked Questions

Is Hanson Water System water safe to drink?
Hanson Water System (PWS ID: KY0540656) has 150 recorded violations in the EPA SDWIS database. No PFAS contamination was detected in UCMR5 testing. This system serves 2,157 people using Surface Water sources.
How many people does Hanson Water System serve?
Hanson Water System serves 2,157 people in Hanson, Kentucky. It is a Local-owned system using Surface Water water sources with 519 service connections.
What type of violations does Hanson Water System have?
Hanson Water System has 150 total violations: 81 health-based violations (MCL exceedances or treatment failures), 64 monitoring/reporting violations, and 0 treatment technique violations. Health-based violations indicate contaminant levels exceeded EPA safe limits.
Has PFAS been detected in Hanson Water System water?
No PFAS testing data is available for Hanson Water System under the EPA's UCMR5 monitoring program.
What water source does Hanson Water System use?
Hanson Water System uses Surface Water as its primary water source. It is classified as a Community Water System (CWS), serving residential populations year-round.
Where does this data come from?
All data comes from the EPA Safe Drinking Water Information System (SDWIS) and the UCMR5 PFAS monitoring program. SDWIS tracks compliance for all public water systems regulated under the Safe Drinking Water Act.
Data Sources: EPA Safe Drinking Water Information System (SDWIS), Q4 2025. This data is provided for informational purposes only.
Data sourced from EPA SDWIS and UCMR5 PFAS monitoring data. See our methodology for details. Retrieved and formatted by PlainWater Editorial

Every figure on PlainWater is rendered directly from EPA SDWIS drinking-water data, no number is typed in by an editor. This system's figures are rendered directly from EPA SDWIS data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.