PlainWater

P&P ENTERPRISES UTILITIES

PWS ID: WV9914061 · PAW PAW, West Virginia 25434

P&P ENTERPRISES UTILITIES serves 25 people in PAW PAW, West Virginia using Groundwater water sources. It has 239 recorded EPA violations, including 24 health-based violations. No PFAS contamination was detected in UCMR5 testing.

Water Quality Snapshot: P&P ENTERPRISES UTILITIES

P&P ENTERPRISES UTILITIES is a private-owned transient non-community water system that delivers drinking water to 25 residents in PAW PAW, West Virginia (Hampshire County) through 65 service connections. Its water is drawn from groundwater sources. EPA's Safe Drinking Water Information System records 239 total violations for this system , of which 24 (10%) are health-based — meaning a contaminant exceeded an EPA Maximum Contaminant Level or a required treatment technique failed. A further 179 monitoring and reporting violations are on file. The most recent violation on record dates to 2025.

The most frequently cited contaminant at this system is Groundwater Rule, recorded in 91 violations (MR). This system has not yet been sampled under EPA's UCMR5 PFAS monitoring program, so no PFAS detection data is available here.

Across West Virginia, EPA tracks 774 public water systems serving 1,597,057 people, with 187,590 cumulative violations and 11,480 health-based violations on record. About 99% of systems in the state carry at least one violation, and state-wide the average per system is 242.4 violations. P&P ENTERPRISES UTILITIES's 239 violations sit below the West Virginia average. Statewide, 46 of 102 UCMR5-tested systems have reported PFAS detections (45.1%). All figures above are sourced directly from EPA SDWIS and UCMR5 public data releases and are updated as EPA publishes new reporting cycles.

Population Served
25
Total Violations
239
Health-Based Violations
24
Water Source
Groundwater

System Details

System Type
Transient Non-Community
Owner Type
Private
Connections
65
County
Hampshire
School/Daycare
No
MCL Violations
0
Monitoring Violations
179
Treatment Tech Violations
24

Violation History

Contaminant violations recorded by EPA.

Contaminant Category Count Latest
Groundwater Rule MR 91 2022
Public Notice Other 36 2022
Nitrate MR 32 2020
Revised Total Coliform Rule MON 28 2025
Coliform (TCR) MR 20 2015
Groundwater Rule TT 16 2021
Revised Total Coliform Rule TT 8 2019
Nitrite MR 8 2020

Verify This Water System

The figures above are aggregated from EPA's public databases. To verify the underlying records — or to file a complaint, request a Consumer Confidence Report, or check current monitoring status — go directly to the federal and state regulators that enforce the Safe Drinking Water Act for P&P ENTERPRISES UTILITIES.

Federal Source of Truth

EPA SDWIS — Federal Reports

EPA's Safe Drinking Water Information System (SDWIS) holds the federal compliance record for every regulated public water system. Open the system-level report by PWS ID:

View PWS ID WV9914061 on SDWIS

Source: EPA SDWIS Federal Reports Search

State Regulator

West Virginia Drinking Water Authority

West Virginia's primacy agency administers the Safe Drinking Water Act locally. Search EPA SDWIS for the current state contact, or use the state's public health or environment department portal.

Find WV regulator via EPA SDWIS

Violation Timeline

Each row links to the EPA SDWIS public record for verification. Cross-reference the contaminant code on EPA's federal report to see violation dates, return-to-compliance status, and enforcement actions.

Year (latest) Contaminant Category Count EPA Record
2025 Revised Total Coliform Rule MON 28 SDWIS / WV9914061 / 8000
2022 Groundwater Rule MR 91 SDWIS / WV9914061 / 0700
2022 Public Notice Other 36 SDWIS / WV9914061 / 7500
2021 Groundwater Rule TT 16 SDWIS / WV9914061 / 0700
2020 Nitrate MR 32 SDWIS / WV9914061 / 1040
2020 Nitrite MR 8 SDWIS / WV9914061 / 1041
2019 Revised Total Coliform Rule TT 8 SDWIS / WV9914061 / 8000
2015 Coliform (TCR) MR 20 SDWIS / WV9914061 / 3100

How P&P ENTERPRISES UTILITIES Compares

Cross-reference this system's record against state averages and the federal MCL framework for context.

Metric P&P ENTERPRISES UTILITIES West Virginia avg Federal benchmark
Total violations 239 242.4 SDWA compliance — any non-zero count is a recorded breach
Health-based violations 24 14.8 Indicates a contaminant exceeded a federal MCL
PFAS detection None 45.1% EPA final rule (2024): PFOA/PFOS MCL = 4.0 ppt
Population served 25 2,063 Sizing context for compliance burden

Sources: EPA SDWIS and EPA National Primary Drinking Water Regulations (40 CFR Part 141). State averages computed across 774 regulated public water systems in West Virginia.

Federal MCL reference — Safe Drinking Water Act thresholds
Contaminant Federal MCL / Action Level Note
Lead 0 mg/L (Action Level: 0.015 mg/L) Lead and Copper Rule treatment technique
Arsenic 0.010 mg/L (10 ppb) Health-based MCL since 2006
Total Coliform Treatment technique (RTCR) Indicator organism, monitoring trigger
PFOA / PFOS (PFAS) 4.0 ppt each (final 2024 rule) Compliance deadline 2029
Nitrate (as N) 10 mg/L Acute health risk for infants

Frequently Asked Questions

Is P&P ENTERPRISES UTILITIES water safe to drink?
P&P ENTERPRISES UTILITIES (PWS ID: WV9914061) has 239 recorded violations in the EPA SDWIS database. No PFAS contamination was detected in UCMR5 testing. This system serves 25 people using Groundwater sources.
How many people does P&P ENTERPRISES UTILITIES serve?
P&P ENTERPRISES UTILITIES serves 25 people in PAW PAW, West Virginia. It is a Private-owned system using Groundwater water sources with 65 service connections.
What type of violations does P&P ENTERPRISES UTILITIES have?
P&P ENTERPRISES UTILITIES has 239 total violations: 24 health-based violations (MCL exceedances or treatment failures), 179 monitoring/reporting violations, and 24 treatment technique violations. Health-based violations indicate contaminant levels exceeded EPA safe limits.
Has PFAS been detected in P&P ENTERPRISES UTILITIES water?
No PFAS testing data is available for P&P ENTERPRISES UTILITIES under the EPA's UCMR5 monitoring program.
What water source does P&P ENTERPRISES UTILITIES use?
P&P ENTERPRISES UTILITIES uses Groundwater as its primary water source. It is classified as a Transient Non-Community Water System, serving transient populations.
Where does this data come from?
All data comes from the EPA Safe Drinking Water Information System (SDWIS) and the UCMR5 PFAS monitoring program. SDWIS tracks compliance for all public water systems regulated under the Safe Drinking Water Act.

Explore PlainWater

Data Sources: EPA Safe Drinking Water Information System (SDWIS), Q4 2025. This data is provided for informational purposes only.

Related

Data sourced from $official public datasets. See our methodology for details. Retrieved and formatted by Kiznis Studio Editorial