PlainWater

Community Water System · PWS WI6560121

Hammond Waterworks

Hammond, Wisconsin 54015-9613 - drinking water served from groundwater sources to 1,884 people, tracked in EPA SDWIS and UCMR5.

1,884
People served
33
EPA violations
23
Health-based
Untested
UCMR5 result

The verdict

EPA records 33 drinking-water violations at Hammond Waterworks, 70% of them health-based - above the Wisconsin per-system average.

33
Total EPA violations on record
70%
Health-based (MCL / treatment failure)
1,884
People served by this system
N/A
PFAS compounds detected (UCMR5)

Water Quality Snapshot: Hammond Waterworks

Hammond Waterworks is a local-owned community water system that delivers drinking water to 1,884 residents in Hammond, Wisconsin (St. Croix County) through 731 service connections. Its water is drawn from groundwater sources. EPA's Safe Drinking Water Information System records 33 total violations for this system , of which 23 (70%) are health-based, meaning a contaminant exceeded an EPA Maximum Contaminant Level or a required treatment technique failed. A further 4 monitoring and reporting violations are on file. The most recent violation on record dates to 2013.

The most frequently cited contaminant at this system is Coliform (TCR), recorded in 23 violations (MCL, health-based). This system has not yet been sampled under EPA's UCMR5 PFAS monitoring program, so no PFAS detection data is available here.

Across Wisconsin, EPA tracks 10,988 public water systems serving 5,131,439 people, with 285,161 cumulative violations and 58,688 health-based violations on record. About 72% of systems in the state carry at least one violation, and state-wide the average per system is 26 violations. Statewide, 78 of 202 UCMR5-tested systems have reported PFAS detections (38.6%).

Hammond Waterworks's 33 violations sit above the Wisconsin average.

All figures above are sourced directly from EPA SDWIS and UCMR5 public data releases and are updated as EPA publishes new reporting cycles.

Population Served
1,884
Total Violations
33
Health-Based Violations
23
Water Source
Groundwater

System Details

System Type
Community
Owner Type
Local
Connections
731
County
St. Croix
School/Daycare
No
MCL Violations
23
Monitoring Violations
4
Treatment Tech Violations
0

Violation History

Contaminant violations recorded by EPA.

Contaminant Category Count Latest
Coliform (TCR) MCL 23 2013
Coliform (TCR) MR 4 2009
Consumer Confidence Rule Other 3 2012

Verify This Water System

The figures above are aggregated from EPA's public databases. To verify the underlying records, or to file a complaint, request a Consumer Confidence Report, or check current monitoring status, go directly to the federal and state regulators that enforce the Safe Drinking Water Act for Hammond Waterworks.

Federal Source of Truth

EPA SDWIS, Federal Reports

EPA's Safe Drinking Water Information System (SDWIS) holds the federal compliance record for every regulated public water system. Open the system-level report by PWS ID:

View PWS ID WI6560121 on SDWIS

Source: EPA SDWIS Federal Reports Search

State Regulator

Wisconsin Drinking Water Authority

Wisconsin DNR, Drinking Water and Groundwater is the primacy agency that licenses and inspects Hammond Waterworks under EPA-delegated authority.

Open WI regulator portal

Source: Wisconsin DNR, Drinking Water and Groundwater

Violation Timeline

Each row links to the EPA SDWIS public record for verification. Cross-reference the contaminant code on EPA's federal report to see violation dates, return-to-compliance status, and enforcement actions.

Year (latest) Contaminant Category Count EPA Record
2013 Coliform (TCR) MCL 23 SDWIS / WI6560121 / 3100
2012 Consumer Confidence Rule Other 3 SDWIS / WI6560121 / 7000
2009 Coliform (TCR) MR 4 SDWIS / WI6560121 / 3100

How Hammond Waterworks Compares

Cross-reference this system's record against state averages and the federal MCL framework for context.

Metric Hammond Waterworks Wisconsin avg Federal benchmark
Total violations 33 26 SDWA compliance, any non-zero count is a recorded breach
Health-based violations 23 5.3 Indicates a contaminant exceeded a federal MCL
PFAS detection None 38.6% EPA final rule (2024): PFOA/PFOS MCL = 4.0 ppt
Population served 1,884 467 Sizing context for compliance burden

Sources: EPA SDWIS and EPA National Primary Drinking Water Regulations (40 CFR Part 141). State averages computed across 10,988 regulated public water systems in Wisconsin.

Federal MCL reference, Safe Drinking Water Act thresholds
Contaminant Federal MCL / Action Level Note
Lead 0 mg/L (Action Level: 0.015 mg/L) Lead and Copper Rule treatment technique
Arsenic 0.010 mg/L (10 ppb) Health-based MCL since 2006
Total Coliform Treatment technique (RTCR) Indicator organism, monitoring trigger
PFOA / PFOS (PFAS) 4.0 ppt each (final 2024 rule) Compliance deadline 2029 (EPA proposed extending to 2031, not yet final as of May 2026)
Nitrate (as N) 10 mg/L Acute health risk for infants

Frequently Asked Questions

Is Hammond Waterworks water safe to drink?
Hammond Waterworks (PWS ID: WI6560121) has 33 recorded violations in the EPA SDWIS database. No PFAS contamination was detected in UCMR5 testing. This system serves 1,884 people using Groundwater sources.
How many people does Hammond Waterworks serve?
Hammond Waterworks serves 1,884 people in Hammond, Wisconsin. It is a Local-owned system using Groundwater water sources with 731 service connections.
What type of violations does Hammond Waterworks have?
Hammond Waterworks has 33 total violations: 23 health-based violations (MCL exceedances or treatment failures), 4 monitoring/reporting violations, and 0 treatment technique violations. Health-based violations indicate contaminant levels exceeded EPA safe limits.
Has PFAS been detected in Hammond Waterworks water?
No PFAS testing data is available for Hammond Waterworks under the EPA's UCMR5 monitoring program.
What water source does Hammond Waterworks use?
Hammond Waterworks uses Groundwater as its primary water source. It is classified as a Community Water System (CWS), serving residential populations year-round.
Where does this data come from?
All data comes from the EPA Safe Drinking Water Information System (SDWIS) and the UCMR5 PFAS monitoring program. SDWIS tracks compliance for all public water systems regulated under the Safe Drinking Water Act.
Data Sources: EPA Safe Drinking Water Information System (SDWIS), Q4 2025. This data is provided for informational purposes only.
Data sourced from EPA SDWIS and UCMR5 PFAS monitoring data. See our methodology for details. Retrieved and formatted by PlainWater Editorial

Every figure on PlainWater is rendered directly from EPA SDWIS drinking-water data, no number is typed in by an editor. This system's figures are rendered directly from EPA SDWIS data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.