CASSVILLE WATERWORKS
PWS ID: WI1220091 · CASSVILLE, Wisconsin 53806-0171
CASSVILLE WATERWORKS serves 777 people in CASSVILLE, Wisconsin using Groundwater water sources. It has 13 recorded EPA violations, including 5 health-based violations. No PFAS contamination was detected in UCMR5 testing.
Water Quality Snapshot: CASSVILLE WATERWORKS
CASSVILLE WATERWORKS is a local-owned community water system that delivers drinking water to 777 residents in CASSVILLE, Wisconsin (Grant County) through 502 service connections. Its water is drawn from groundwater sources. EPA's Safe Drinking Water Information System records 13 total violations for this system , of which 5 (38%) are health-based — meaning a contaminant exceeded an EPA Maximum Contaminant Level or a required treatment technique failed. A further 7 monitoring and reporting violations are on file. The most recent violation on record dates to 2023.
The most frequently cited contaminant at this system is Lead and Copper Rule, recorded in 7 violations (MR). This system has not yet been sampled under EPA's UCMR5 PFAS monitoring program, so no PFAS detection data is available here.
Across Wisconsin, EPA tracks 10,988 public water systems serving 5,131,439 people, with 285,161 cumulative violations and 58,688 health-based violations on record. About 72% of systems in the state carry at least one violation, and state-wide the average per system is 26 violations. CASSVILLE WATERWORKS's 13 violations sit below the Wisconsin average. Statewide, 78 of 202 UCMR5-tested systems have reported PFAS detections (38.6%). All figures above are sourced directly from EPA SDWIS and UCMR5 public data releases and are updated as EPA publishes new reporting cycles.
System Details
- System Type
- Community
- Owner Type
- Local
- Connections
- 502
- County
- Grant
- School/Daycare
- No
- MCL Violations
- 5
- Monitoring Violations
- 7
- Treatment Tech Violations
- 0
Violation History
Contaminant violations recorded by EPA.
| Contaminant | Category | Count | Latest |
|---|---|---|---|
| Lead and Copper Rule | MR | 7 | 2023 |
| Revised Total Coliform Rule | MCL | 5 | 2019 |
Verify This Water System
The figures above are aggregated from EPA's public databases. To verify the underlying records — or to file a complaint, request a Consumer Confidence Report, or check current monitoring status — go directly to the federal and state regulators that enforce the Safe Drinking Water Act for CASSVILLE WATERWORKS.
EPA SDWIS — Federal Reports
EPA's Safe Drinking Water Information System (SDWIS) holds the federal compliance record for every regulated public water system. Open the system-level report by PWS ID:
View PWS ID WI1220091 on SDWISSource: EPA SDWIS Federal Reports Search
Wisconsin Drinking Water Authority
Wisconsin DNR — Drinking Water and Groundwater is the primacy agency that licenses and inspects CASSVILLE WATERWORKS under EPA-delegated authority.
Open WI regulator portalViolation Timeline
Each row links to the EPA SDWIS public record for verification. Cross-reference the contaminant code on EPA's federal report to see violation dates, return-to-compliance status, and enforcement actions.
| Year (latest) | Contaminant | Category | Count | EPA Record |
|---|---|---|---|---|
| 2023 | Lead and Copper Rule | MR | 7 | SDWIS / WI1220091 / 5000 |
| 2019 | Revised Total Coliform Rule | MCL | 5 | SDWIS / WI1220091 / 8000 |
How CASSVILLE WATERWORKS Compares
Cross-reference this system's record against state averages and the federal MCL framework for context.
| Metric | CASSVILLE WATERWORKS | Wisconsin avg | Federal benchmark |
|---|---|---|---|
| Total violations | 13 | 26 | SDWA compliance — any non-zero count is a recorded breach |
| Health-based violations | 5 | 5.3 | Indicates a contaminant exceeded a federal MCL |
| PFAS detection | None | 38.6% | EPA final rule (2024): PFOA/PFOS MCL = 4.0 ppt |
| Population served | 777 | 467 | Sizing context for compliance burden |
Sources: EPA SDWIS and EPA National Primary Drinking Water Regulations (40 CFR Part 141). State averages computed across 10,988 regulated public water systems in Wisconsin.
Federal MCL reference — Safe Drinking Water Act thresholds ▼
| Contaminant | Federal MCL / Action Level | Note |
|---|---|---|
| Lead | 0 mg/L (Action Level: 0.015 mg/L) | Lead and Copper Rule treatment technique |
| Arsenic | 0.010 mg/L (10 ppb) | Health-based MCL since 2006 |
| Total Coliform | Treatment technique (RTCR) | Indicator organism, monitoring trigger |
| PFOA / PFOS (PFAS) | 4.0 ppt each (final 2024 rule) | Compliance deadline 2029 |
| Nitrate (as N) | 10 mg/L | Acute health risk for infants |
Frequently Asked Questions
Is CASSVILLE WATERWORKS water safe to drink? ▼
How many people does CASSVILLE WATERWORKS serve? ▼
What type of violations does CASSVILLE WATERWORKS have? ▼
Has PFAS been detected in CASSVILLE WATERWORKS water? ▼
What water source does CASSVILLE WATERWORKS use? ▼
Where does this data come from? ▼
Explore PlainWater
Related Data for Wisconsin
Read our methodology — how this data is sourced, computed, and verified.