Hi-Point 2
PWS ID: WA53AE137 · Pasco, Washington 99301
Hi-Point 2 serves 93 people in Pasco, Washington using Groundwater water sources. It has a clean compliance record with no EPA violations recorded. No PFAS contamination was detected in UCMR5 testing.
Water Quality Snapshot: Hi-Point 2
Hi-Point 2 is a private-owned transient non-community water system that delivers drinking water to 93 residents in Pasco, Washington (Franklin County) through 9 service connections. Its water is drawn from groundwater sources. EPA's Safe Drinking Water Information System records 0 total violations for this system , giving it a clean Safe Drinking Water Act compliance record.
No specific contaminant violations have been recorded in EPA's detailed violation register for this system. This system has not yet been sampled under EPA's UCMR5 PFAS monitoring program, so no PFAS detection data is available here.
Across Washington, EPA tracks 4,557 public water systems serving 9,736,844 people, with 314,648 cumulative violations and 20,590 health-based violations on record. About 92% of systems in the state carry at least one violation, and state-wide the average per system is 69 violations. Hi-Point 2's 0 violations sit below the Washington average. Statewide, 98 of 247 UCMR5-tested systems have reported PFAS detections (39.7%). All figures above are sourced directly from EPA SDWIS and UCMR5 public data releases and are updated as EPA publishes new reporting cycles.
System Details
- System Type
- Transient Non-Community
- Owner Type
- Private
- Connections
- 9
- County
- Franklin
- School/Daycare
- No
- MCL Violations
- 0
- Monitoring Violations
- 0
- Treatment Tech Violations
- 0
Verify This Water System
The figures above are aggregated from EPA's public databases. To verify the underlying records — or to file a complaint, request a Consumer Confidence Report, or check current monitoring status — go directly to the federal and state regulators that enforce the Safe Drinking Water Act for Hi-Point 2.
EPA SDWIS — Federal Reports
EPA's Safe Drinking Water Information System (SDWIS) holds the federal compliance record for every regulated public water system. Open the system-level report by PWS ID:
View PWS ID WA53AE137 on SDWISSource: EPA SDWIS Federal Reports Search
Washington Drinking Water Authority
Washington State Department of Health — Office of Drinking Water is the primacy agency that licenses and inspects Hi-Point 2 under EPA-delegated authority.
Open WA regulator portalSource: Washington State Department of Health — Office of Drinking Water
How Hi-Point 2 Compares
Cross-reference this system's record against state averages and the federal MCL framework for context.
| Metric | Hi-Point 2 | Washington avg | Federal benchmark |
|---|---|---|---|
| Total violations | 0 | 69 | SDWA compliance — any non-zero count is a recorded breach |
| Health-based violations | 0 | 4.5 | Indicates a contaminant exceeded a federal MCL |
| PFAS detection | None | 39.7% | EPA final rule (2024): PFOA/PFOS MCL = 4.0 ppt |
| Population served | 93 | 2,137 | Sizing context for compliance burden |
Sources: EPA SDWIS and EPA National Primary Drinking Water Regulations (40 CFR Part 141). State averages computed across 4,557 regulated public water systems in Washington.
Federal MCL reference — Safe Drinking Water Act thresholds ▼
| Contaminant | Federal MCL / Action Level | Note |
|---|---|---|
| Lead | 0 mg/L (Action Level: 0.015 mg/L) | Lead and Copper Rule treatment technique |
| Arsenic | 0.010 mg/L (10 ppb) | Health-based MCL since 2006 |
| Total Coliform | Treatment technique (RTCR) | Indicator organism, monitoring trigger |
| PFOA / PFOS (PFAS) | 4.0 ppt each (final 2024 rule) | Compliance deadline 2029 |
| Nitrate (as N) | 10 mg/L | Acute health risk for infants |
Frequently Asked Questions
Is Hi-Point 2 water safe to drink? ▼
How many people does Hi-Point 2 serve? ▼
What type of violations does Hi-Point 2 have? ▼
Has PFAS been detected in Hi-Point 2 water? ▼
What water source does Hi-Point 2 use? ▼
Where does this data come from? ▼
Explore PlainWater
Related Data for Washington
Read our methodology — how this data is sourced, computed, and verified.