PlainWater
States → Washington

QUAIL RUN 667

PWS ID: WA5370185 · Lacey, Washington 98503

QUAIL RUN 667 serves 493 people in Lacey, Washington using Groundwater water sources. It has 38 recorded EPA violations, including 0 health-based violations. No PFAS contamination was detected in UCMR5 testing.

Water Quality Snapshot: QUAIL RUN 667

QUAIL RUN 667 is a local-owned community water system that delivers drinking water to 493 residents in Lacey, Washington (Pierce County) through 198 service connections. Its water is drawn from groundwater sources. EPA's Safe Drinking Water Information System records 38 total violations for this system , of which 0 (0%) are health-based — meaning a contaminant exceeded an EPA Maximum Contaminant Level or a required treatment technique failed. A further 37 monitoring and reporting violations are on file. The most recent violation on record dates to 2008.

The most frequently cited contaminant at this system is Coliform (TCR), recorded in 5 violations (MR). This system has not yet been sampled under EPA's UCMR5 PFAS monitoring program, so no PFAS detection data is available here.

Across Washington, EPA tracks 4,557 public water systems serving 9,736,844 people, with 314,648 cumulative violations and 20,590 health-based violations on record. About 92% of systems in the state carry at least one violation, and state-wide the average per system is 69 violations. QUAIL RUN 667's 38 violations sit below the Washington average. Statewide, 98 of 247 UCMR5-tested systems have reported PFAS detections (39.7%). All figures above are sourced directly from EPA SDWIS and UCMR5 public data releases and are updated as EPA publishes new reporting cycles.

Population Served
493
Total Violations
38
Health-Based Violations
0
Water Source
Groundwater

System Details

System Type
Community
Owner Type
Local
Connections
198
County
Pierce
School/Daycare
No
MCL Violations
0
Monitoring Violations
37
Treatment Tech Violations
0

Violation History

Contaminant violations recorded by EPA.

Contaminant Category Count Latest
Coliform (TCR) MR 5 1996
Barium MR 3 2008
Chromium MR 3 2008
Fluoride MR 3 2008
Mercury MR 3 2008
Selenium MR 3 2008
Cadmium MR 3 2008
Nickel MR 2 2008
Thallium, Total MR 2 2008
Arsenic MR 2 2008
Antimony, Total MR 2 2008
CYANIDE MR 2 2008
Beryllium, Total MR 2 2008
Consumer Confidence Rule Other 1 1999
Nitrate MR 1 1979
Gross Alpha, Excl. Radon and U MR 1 1979

Verify This Water System

The figures above are aggregated from EPA's public databases. To verify the underlying records — or to file a complaint, request a Consumer Confidence Report, or check current monitoring status — go directly to the federal and state regulators that enforce the Safe Drinking Water Act for QUAIL RUN 667.

Federal Source of Truth

EPA SDWIS — Federal Reports

EPA's Safe Drinking Water Information System (SDWIS) holds the federal compliance record for every regulated public water system. Open the system-level report by PWS ID:

View PWS ID WA5370185 on SDWIS

Source: EPA SDWIS Federal Reports Search

State Regulator

Washington Drinking Water Authority

Washington State Department of Health — Office of Drinking Water is the primacy agency that licenses and inspects QUAIL RUN 667 under EPA-delegated authority.

Open WA regulator portal

Source: Washington State Department of Health — Office of Drinking Water

Violation Timeline

Each row links to the EPA SDWIS public record for verification. Cross-reference the contaminant code on EPA's federal report to see violation dates, return-to-compliance status, and enforcement actions.

Year (latest) Contaminant Category Count EPA Record
2008 Barium MR 3 SDWIS / WA5370185 / 1010
2008 Chromium MR 3 SDWIS / WA5370185 / 1020
2008 Fluoride MR 3 SDWIS / WA5370185 / 1025
2008 Mercury MR 3 SDWIS / WA5370185 / 1035
2008 Selenium MR 3 SDWIS / WA5370185 / 1045
2008 Cadmium MR 3 SDWIS / WA5370185 / 1015
2008 Nickel MR 2 SDWIS / WA5370185 / 1036
2008 Thallium, Total MR 2 SDWIS / WA5370185 / 1085
2008 Arsenic MR 2 SDWIS / WA5370185 / 1005
2008 Antimony, Total MR 2 SDWIS / WA5370185 / 1074
2008 CYANIDE MR 2 SDWIS / WA5370185 / 1024
2008 Beryllium, Total MR 2 SDWIS / WA5370185 / 1075
1999 Consumer Confidence Rule Other 1 SDWIS / WA5370185 / 7000
1996 Coliform (TCR) MR 5 SDWIS / WA5370185 / 3100
1979 Nitrate MR 1 SDWIS / WA5370185 / 1040

How QUAIL RUN 667 Compares

Cross-reference this system's record against state averages and the federal MCL framework for context.

Metric QUAIL RUN 667 Washington avg Federal benchmark
Total violations 38 69 SDWA compliance — any non-zero count is a recorded breach
Health-based violations 0 4.5 Indicates a contaminant exceeded a federal MCL
PFAS detection None 39.7% EPA final rule (2024): PFOA/PFOS MCL = 4.0 ppt
Population served 493 2,137 Sizing context for compliance burden

Sources: EPA SDWIS and EPA National Primary Drinking Water Regulations (40 CFR Part 141). State averages computed across 4,557 regulated public water systems in Washington.

Federal MCL reference — Safe Drinking Water Act thresholds ▼
Contaminant Federal MCL / Action Level Note
Lead 0 mg/L (Action Level: 0.015 mg/L) Lead and Copper Rule treatment technique
Arsenic 0.010 mg/L (10 ppb) Health-based MCL since 2006
Total Coliform Treatment technique (RTCR) Indicator organism, monitoring trigger
PFOA / PFOS (PFAS) 4.0 ppt each (final 2024 rule) Compliance deadline 2029
Nitrate (as N) 10 mg/L Acute health risk for infants

Frequently Asked Questions

Is QUAIL RUN 667 water safe to drink? ▼
QUAIL RUN 667 (PWS ID: WA5370185) has 38 recorded violations in the EPA SDWIS database. No PFAS contamination was detected in UCMR5 testing. This system serves 493 people using Groundwater sources.
How many people does QUAIL RUN 667 serve? ▼
QUAIL RUN 667 serves 493 people in Lacey, Washington. It is a Local-owned system using Groundwater water sources with 198 service connections.
What type of violations does QUAIL RUN 667 have? ▼
QUAIL RUN 667 has 38 total violations: 0 health-based violations (MCL exceedances or treatment failures), 37 monitoring/reporting violations, and 0 treatment technique violations. Health-based violations indicate contaminant levels exceeded EPA safe limits.
Has PFAS been detected in QUAIL RUN 667 water? ▼
No PFAS testing data is available for QUAIL RUN 667 under the EPA's UCMR5 monitoring program.
What water source does QUAIL RUN 667 use? ▼
QUAIL RUN 667 uses Groundwater as its primary water source. It is classified as a Community Water System (CWS), serving residential populations year-round.
Where does this data come from? ▼
All data comes from the EPA Safe Drinking Water Information System (SDWIS) and the UCMR5 PFAS monitoring program. SDWIS tracks compliance for all public water systems regulated under the Safe Drinking Water Act.

Explore PlainWater

Water in Washington

All systems in state
All States

Water quality by state
Contaminants

PFAS & other pollutants
Guides

Understanding water quality

Related Data for Washington

Environmental Data → Natural Hazards → Air Quality → Healthcare Access → Climate Data →
Data Sources: EPA Safe Drinking Water Information System (SDWIS), Q4 2025. This data is provided for informational purposes only.

Read our methodology — how this data is sourced, computed, and verified.

Related

Browse all → | Rankings →
Data sourced from $official public datasets. See our methodology for details. Retrieved and formatted by PlainWater Editorial