PlainWater

MOUNTAIN VIEW

PWS ID: WA5316937 · White Salmon, Washington 98672

MOUNTAIN VIEW serves 72 people in White Salmon, Washington using Groundwater water sources. It has 25 recorded EPA violations, including 1 health-based violations. No PFAS contamination was detected in UCMR5 testing.

Water Quality Snapshot: MOUNTAIN VIEW

MOUNTAIN VIEW is a private-owned community water system that delivers drinking water to 72 residents in White Salmon, Washington (Skamania County) through 29 service connections. Its water is drawn from groundwater sources. EPA's Safe Drinking Water Information System records 25 total violations for this system , of which 1 (4%) are health-based — meaning a contaminant exceeded an EPA Maximum Contaminant Level or a required treatment technique failed. A further 19 monitoring and reporting violations are on file. The most recent violation on record dates to 2025.

The most frequently cited contaminant at this system is Coliform (TCR), recorded in 9 violations (MR). This system has not yet been sampled under EPA's UCMR5 PFAS monitoring program, so no PFAS detection data is available here.

Across Washington, EPA tracks 4,557 public water systems serving 9,736,844 people, with 314,648 cumulative violations and 20,590 health-based violations on record. About 92% of systems in the state carry at least one violation, and state-wide the average per system is 69 violations. MOUNTAIN VIEW's 25 violations sit below the Washington average. Statewide, 98 of 247 UCMR5-tested systems have reported PFAS detections (39.7%). All figures above are sourced directly from EPA SDWIS and UCMR5 public data releases and are updated as EPA publishes new reporting cycles.

Population Served
72
Total Violations
25
Health-Based Violations
1
Water Source
Groundwater

System Details

System Type
Community
Owner Type
Private
Connections
29
County
Skamania
School/Daycare
No
MCL Violations
1
Monitoring Violations
19
Treatment Tech Violations
0

Violation History

Contaminant violations recorded by EPA.

Contaminant Category Count Latest
Coliform (TCR) MR 9 2015
Revised Total Coliform Rule MON 4 2021
Consumer Confidence Rule Other 3 2025
Dalapon MR 1 2014
Picloram MR 1 2014
Revised Total Coliform Rule MCL 1 2021
Lead and Copper Rule MR 1 1998
2,4,5-TP MR 1 2014
Dinoseb MR 1 2014
Pentachlorophenol MR 1 2014

Verify This Water System

The figures above are aggregated from EPA's public databases. To verify the underlying records — or to file a complaint, request a Consumer Confidence Report, or check current monitoring status — go directly to the federal and state regulators that enforce the Safe Drinking Water Act for MOUNTAIN VIEW.

Federal Source of Truth

EPA SDWIS — Federal Reports

EPA's Safe Drinking Water Information System (SDWIS) holds the federal compliance record for every regulated public water system. Open the system-level report by PWS ID:

View PWS ID WA5316937 on SDWIS

Source: EPA SDWIS Federal Reports Search

State Regulator

Washington Drinking Water Authority

Washington State Department of Health — Office of Drinking Water is the primacy agency that licenses and inspects MOUNTAIN VIEW under EPA-delegated authority.

Open WA regulator portal

Source: Washington State Department of Health — Office of Drinking Water

Violation Timeline

Each row links to the EPA SDWIS public record for verification. Cross-reference the contaminant code on EPA's federal report to see violation dates, return-to-compliance status, and enforcement actions.

Year (latest) Contaminant Category Count EPA Record
2025 Consumer Confidence Rule Other 3 SDWIS / WA5316937 / 7000
2021 Revised Total Coliform Rule MON 4 SDWIS / WA5316937 / 8000
2021 Revised Total Coliform Rule MCL 1 SDWIS / WA5316937 / 8000
2015 Coliform (TCR) MR 9 SDWIS / WA5316937 / 3100
2014 Dalapon MR 1 SDWIS / WA5316937 / 2031
2014 Picloram MR 1 SDWIS / WA5316937 / 2040
2014 2,4,5-TP MR 1 SDWIS / WA5316937 / 2110
2014 Dinoseb MR 1 SDWIS / WA5316937 / 2041
2014 Pentachlorophenol MR 1 SDWIS / WA5316937 / 2326
1998 Lead and Copper Rule MR 1 SDWIS / WA5316937 / 5000

How MOUNTAIN VIEW Compares

Cross-reference this system's record against state averages and the federal MCL framework for context.

Metric MOUNTAIN VIEW Washington avg Federal benchmark
Total violations 25 69 SDWA compliance — any non-zero count is a recorded breach
Health-based violations 1 4.5 Indicates a contaminant exceeded a federal MCL
PFAS detection None 39.7% EPA final rule (2024): PFOA/PFOS MCL = 4.0 ppt
Population served 72 2,137 Sizing context for compliance burden

Sources: EPA SDWIS and EPA National Primary Drinking Water Regulations (40 CFR Part 141). State averages computed across 4,557 regulated public water systems in Washington.

Federal MCL reference — Safe Drinking Water Act thresholds
Contaminant Federal MCL / Action Level Note
Lead 0 mg/L (Action Level: 0.015 mg/L) Lead and Copper Rule treatment technique
Arsenic 0.010 mg/L (10 ppb) Health-based MCL since 2006
Total Coliform Treatment technique (RTCR) Indicator organism, monitoring trigger
PFOA / PFOS (PFAS) 4.0 ppt each (final 2024 rule) Compliance deadline 2029
Nitrate (as N) 10 mg/L Acute health risk for infants

Frequently Asked Questions

Is MOUNTAIN VIEW water safe to drink?
MOUNTAIN VIEW (PWS ID: WA5316937) has 25 recorded violations in the EPA SDWIS database. No PFAS contamination was detected in UCMR5 testing. This system serves 72 people using Groundwater sources.
How many people does MOUNTAIN VIEW serve?
MOUNTAIN VIEW serves 72 people in White Salmon, Washington. It is a Private-owned system using Groundwater water sources with 29 service connections.
What type of violations does MOUNTAIN VIEW have?
MOUNTAIN VIEW has 25 total violations: 1 health-based violations (MCL exceedances or treatment failures), 19 monitoring/reporting violations, and 0 treatment technique violations. Health-based violations indicate contaminant levels exceeded EPA safe limits.
Has PFAS been detected in MOUNTAIN VIEW water?
No PFAS testing data is available for MOUNTAIN VIEW under the EPA's UCMR5 monitoring program.
What water source does MOUNTAIN VIEW use?
MOUNTAIN VIEW uses Groundwater as its primary water source. It is classified as a Community Water System (CWS), serving residential populations year-round.
Where does this data come from?
All data comes from the EPA Safe Drinking Water Information System (SDWIS) and the UCMR5 PFAS monitoring program. SDWIS tracks compliance for all public water systems regulated under the Safe Drinking Water Act.

Explore PlainWater

Data Sources: EPA Safe Drinking Water Information System (SDWIS), Q4 2025. This data is provided for informational purposes only.

Related

Data sourced from $official public datasets. See our methodology for details. Retrieved and formatted by PlainWater Editorial