PlainWater
States → Washington

Transient Non-Community Water System · PWS WA5315427

Klicker Water System 1

Walla Walla, Washington 99362 - drinking water served from surface water sources to 134 people, tracked in EPA SDWIS and UCMR5.

134
People served
0
EPA violations
0
Health-based
Untested
UCMR5 result

The verdict

Klicker Water System 1 carries a clean Safe Drinking Water Act record, zero EPA violations.

0
Total EPA violations on record
0%
Health-based (MCL / treatment failure)
134
People served by this system
N/A
PFAS compounds detected (UCMR5)

Water Quality Snapshot: Klicker Water System 1

Klicker Water System 1 is a private-owned transient non-community water system that delivers drinking water to 134 residents in Walla Walla, Washington (Walla Walla County) through 4 service connections. Its water is drawn from surface water sources. EPA's Safe Drinking Water Information System records 0 total violations for this system , giving it a clean Safe Drinking Water Act compliance record.

No specific contaminant violations have been recorded in EPA's detailed violation register for this system. This system has not yet been sampled under EPA's UCMR5 PFAS monitoring program, so no PFAS detection data is available here.

Across Washington, EPA tracks 4,557 public water systems serving 9,736,844 people, with 314,648 cumulative violations and 20,590 health-based violations on record. About 92% of systems in the state carry at least one violation, and state-wide the average per system is 69 violations. Statewide, 98 of 247 UCMR5-tested systems have reported PFAS detections (39.7%).

Klicker Water System 1's 0 violations sit below the Washington average.

All figures above are sourced directly from EPA SDWIS and UCMR5 public data releases and are updated as EPA publishes new reporting cycles.

Population Served
134
Total Violations
0
Health-Based Violations
0
Water Source
Surface Water

System Details

System Type
Transient Non-Community
Owner Type
Private
Connections
4
County
Walla Walla
School/Daycare
No
MCL Violations
0
Monitoring Violations
0
Treatment Tech Violations
0

Verify This Water System

The figures above are aggregated from EPA's public databases. To verify the underlying records, or to file a complaint, request a Consumer Confidence Report, or check current monitoring status, go directly to the federal and state regulators that enforce the Safe Drinking Water Act for Klicker Water System 1.

Federal Source of Truth

EPA SDWIS, Federal Reports

EPA's Safe Drinking Water Information System (SDWIS) holds the federal compliance record for every regulated public water system. Open the system-level report by PWS ID:

View PWS ID WA5315427 on SDWIS

Source: EPA SDWIS Federal Reports Search

State Regulator

Washington Drinking Water Authority

Washington State Department of Health, Office of Drinking Water is the primacy agency that licenses and inspects Klicker Water System 1 under EPA-delegated authority.

Open WA regulator portal

Source: Washington State Department of Health, Office of Drinking Water

How Klicker Water System 1 Compares

Cross-reference this system's record against state averages and the federal MCL framework for context.

Metric Klicker Water System 1 Washington avg Federal benchmark
Total violations 0 69 SDWA compliance, any non-zero count is a recorded breach
Health-based violations 0 4.5 Indicates a contaminant exceeded a federal MCL
PFAS detection None 39.7% EPA final rule (2024): PFOA/PFOS MCL = 4.0 ppt
Population served 134 2,137 Sizing context for compliance burden

Sources: EPA SDWIS and EPA National Primary Drinking Water Regulations (40 CFR Part 141). State averages computed across 4,557 regulated public water systems in Washington.

Federal MCL reference, Safe Drinking Water Act thresholds ▼
Contaminant Federal MCL / Action Level Note
Lead 0 mg/L (Action Level: 0.015 mg/L) Lead and Copper Rule treatment technique
Arsenic 0.010 mg/L (10 ppb) Health-based MCL since 2006
Total Coliform Treatment technique (RTCR) Indicator organism, monitoring trigger
PFOA / PFOS (PFAS) 4.0 ppt each (final 2024 rule) Compliance deadline 2029 (EPA proposed extending to 2031, not yet final as of May 2026)
Nitrate (as N) 10 mg/L Acute health risk for infants

Frequently Asked Questions

Is Klicker Water System 1 water safe to drink? ▼
Klicker Water System 1 (PWS ID: WA5315427) has 0 recorded violations in the EPA SDWIS database. No PFAS contamination was detected in UCMR5 testing. This system serves 134 people using Surface Water sources.
How many people does Klicker Water System 1 serve? ▼
Klicker Water System 1 serves 134 people in Walla Walla, Washington. It is a Private-owned system using Surface Water water sources with 4 service connections.
What type of violations does Klicker Water System 1 have? ▼
Klicker Water System 1 has 0 total violations: 0 health-based violations (MCL exceedances or treatment failures), 0 monitoring/reporting violations, and 0 treatment technique violations. Health-based violations indicate contaminant levels exceeded EPA safe limits.
Has PFAS been detected in Klicker Water System 1 water? ▼
No PFAS testing data is available for Klicker Water System 1 under the EPA's UCMR5 monitoring program.
What water source does Klicker Water System 1 use? ▼
Klicker Water System 1 uses Surface Water as its primary water source. It is classified as a Transient Non-Community Water System, serving transient populations.
Where does this data come from? ▼
All data comes from the EPA Safe Drinking Water Information System (SDWIS) and the UCMR5 PFAS monitoring program. SDWIS tracks compliance for all public water systems regulated under the Safe Drinking Water Act.
Data Sources: EPA Safe Drinking Water Information System (SDWIS), Q4 2025. This data is provided for informational purposes only.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from EPA SDWIS and UCMR5 PFAS monitoring data. See our methodology for details. Retrieved and formatted by PlainWater Editorial

Every figure on PlainWater is rendered directly from EPA SDWIS drinking-water data, no number is typed in by an editor. This system's figures are rendered directly from EPA SDWIS data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.