PlainWater

Non-Transient Non-Community Water System · PWS WA5300924

Bloedel Reserve

Bremerton, Washington 98312 - drinking water served from groundwater sources to 559 people, tracked in EPA SDWIS and UCMR5.

559
People served
24
EPA violations
22
Health-based
Untested
UCMR5 result

The verdict

EPA records 24 drinking-water violations at Bloedel Reserve, 92% of them health-based - below the Washington per-system average.

24
Total EPA violations on record
92%
Health-based (MCL / treatment failure)
559
People served by this system
N/A
PFAS compounds detected (UCMR5)

Water Quality Snapshot: Bloedel Reserve

Bloedel Reserve is a private-owned non-transient non-community water system that delivers drinking water to 559 residents in Bremerton, Washington (Kitsap County) through 10 service connections. Its water is drawn from groundwater sources. EPA's Safe Drinking Water Information System records 24 total violations for this system , of which 22 (92%) are health-based, meaning a contaminant exceeded an EPA Maximum Contaminant Level or a required treatment technique failed. A further 2 monitoring and reporting violations are on file. The most recent violation on record dates to 2022.

The most frequently cited contaminant at this system is Coliform (TCR), recorded in 22 violations (MCL, health-based). This system has not yet been sampled under EPA's UCMR5 PFAS monitoring program, so no PFAS detection data is available here.

Across Washington, EPA tracks 4,557 public water systems serving 9,736,844 people, with 314,648 cumulative violations and 20,590 health-based violations on record. About 92% of systems in the state carry at least one violation, and state-wide the average per system is 69 violations. Statewide, 98 of 247 UCMR5-tested systems have reported PFAS detections (39.7%).

Bloedel Reserve's 24 violations sit below the Washington average.

All figures above are sourced directly from EPA SDWIS and UCMR5 public data releases and are updated as EPA publishes new reporting cycles.

Population Served
559
Total Violations
24
Health-Based Violations
22
Water Source
Groundwater

System Details

System Type
Non-Transient Non-Community
Owner Type
Private
Connections
10
County
Kitsap
School/Daycare
No
MCL Violations
22
Monitoring Violations
2
Treatment Tech Violations
0

Violation History

Contaminant violations recorded by EPA.

Contaminant Category Count Latest
Coliform (TCR) MCL 22 2000
Revised Total Coliform Rule MON 1 2022
Lead and Copper Rule MR 1 2017

Verify This Water System

The figures above are aggregated from EPA's public databases. To verify the underlying records, or to file a complaint, request a Consumer Confidence Report, or check current monitoring status, go directly to the federal and state regulators that enforce the Safe Drinking Water Act for Bloedel Reserve.

Federal Source of Truth

EPA SDWIS, Federal Reports

EPA's Safe Drinking Water Information System (SDWIS) holds the federal compliance record for every regulated public water system. Open the system-level report by PWS ID:

View PWS ID WA5300924 on SDWIS

Source: EPA SDWIS Federal Reports Search

State Regulator

Washington Drinking Water Authority

Washington State Department of Health, Office of Drinking Water is the primacy agency that licenses and inspects Bloedel Reserve under EPA-delegated authority.

Open WA regulator portal

Source: Washington State Department of Health, Office of Drinking Water

Violation Timeline

Each row links to the EPA SDWIS public record for verification. Cross-reference the contaminant code on EPA's federal report to see violation dates, return-to-compliance status, and enforcement actions.

Year (latest) Contaminant Category Count EPA Record
2022 Revised Total Coliform Rule MON 1 SDWIS / WA5300924 / 8000
2017 Lead and Copper Rule MR 1 SDWIS / WA5300924 / 5000
2000 Coliform (TCR) MCL 22 SDWIS / WA5300924 / 3100

How Bloedel Reserve Compares

Cross-reference this system's record against state averages and the federal MCL framework for context.

Metric Bloedel Reserve Washington avg Federal benchmark
Total violations 24 69 SDWA compliance, any non-zero count is a recorded breach
Health-based violations 22 4.5 Indicates a contaminant exceeded a federal MCL
PFAS detection None 39.7% EPA final rule (2024): PFOA/PFOS MCL = 4.0 ppt
Population served 559 2,137 Sizing context for compliance burden

Sources: EPA SDWIS and EPA National Primary Drinking Water Regulations (40 CFR Part 141). State averages computed across 4,557 regulated public water systems in Washington.

Federal MCL reference, Safe Drinking Water Act thresholds
Contaminant Federal MCL / Action Level Note
Lead 0 mg/L (Action Level: 0.015 mg/L) Lead and Copper Rule treatment technique
Arsenic 0.010 mg/L (10 ppb) Health-based MCL since 2006
Total Coliform Treatment technique (RTCR) Indicator organism, monitoring trigger
PFOA / PFOS (PFAS) 4.0 ppt each (final 2024 rule) Compliance deadline 2029 (EPA proposed extending to 2031, not yet final as of May 2026)
Nitrate (as N) 10 mg/L Acute health risk for infants

Frequently Asked Questions

Is Bloedel Reserve water safe to drink?
Bloedel Reserve (PWS ID: WA5300924) has 24 recorded violations in the EPA SDWIS database. No PFAS contamination was detected in UCMR5 testing. This system serves 559 people using Groundwater sources.
How many people does Bloedel Reserve serve?
Bloedel Reserve serves 559 people in Bremerton, Washington. It is a Private-owned system using Groundwater water sources with 10 service connections.
What type of violations does Bloedel Reserve have?
Bloedel Reserve has 24 total violations: 22 health-based violations (MCL exceedances or treatment failures), 2 monitoring/reporting violations, and 0 treatment technique violations. Health-based violations indicate contaminant levels exceeded EPA safe limits.
Has PFAS been detected in Bloedel Reserve water?
No PFAS testing data is available for Bloedel Reserve under the EPA's UCMR5 monitoring program.
What water source does Bloedel Reserve use?
Bloedel Reserve uses Groundwater as its primary water source. It is classified as a Non-Transient Non-Community Water System, serving the same people for at least 6 months per year.
Where does this data come from?
All data comes from the EPA Safe Drinking Water Information System (SDWIS) and the UCMR5 PFAS monitoring program. SDWIS tracks compliance for all public water systems regulated under the Safe Drinking Water Act.
Data Sources: EPA Safe Drinking Water Information System (SDWIS), Q4 2025. This data is provided for informational purposes only.
Data sourced from EPA SDWIS and UCMR5 PFAS monitoring data. See our methodology for details. Retrieved and formatted by PlainWater Editorial

Every figure on PlainWater is rendered directly from EPA SDWIS drinking-water data, no number is typed in by an editor. This system's figures are rendered directly from EPA SDWIS data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.