PlainWater

ST GEORGE FIRE DISTRICT #2

PWS ID: VT0005094 · ST GEORGE, Vermont 05495

ST GEORGE FIRE DISTRICT #2 serves 72 people in ST GEORGE, Vermont using Groundwater water sources. It has 98 recorded EPA violations, including 55 health-based violations. No PFAS contamination was detected in UCMR5 testing.

Water Quality Snapshot: ST GEORGE FIRE DISTRICT #2

ST GEORGE FIRE DISTRICT #2 is a private-owned community water system that delivers drinking water to 72 residents in ST GEORGE, Vermont (Chittenden County) through 25 service connections. Its water is drawn from groundwater sources. EPA's Safe Drinking Water Information System records 98 total violations for this system , of which 55 (56%) are health-based — meaning a contaminant exceeded an EPA Maximum Contaminant Level or a required treatment technique failed. A further 20 monitoring and reporting violations are on file. The most recent violation on record dates to 2010.

The most frequently cited contaminant at this system is Gross Alpha, Excl. Radon and U, recorded in 27 violations (MCL, health-based). This system has not yet been sampled under EPA's UCMR5 PFAS monitoring program, so no PFAS detection data is available here.

Across Vermont, EPA tracks 1,357 public water systems serving 646,999 people, with 153,729 cumulative violations and 16,917 health-based violations on record. About 93% of systems in the state carry at least one violation, and state-wide the average per system is 113.3 violations. ST GEORGE FIRE DISTRICT #2's 98 violations sit below the Vermont average. Statewide, 3 of 37 UCMR5-tested systems have reported PFAS detections (8.1%). All figures above are sourced directly from EPA SDWIS and UCMR5 public data releases and are updated as EPA publishes new reporting cycles.

Population Served
72
Total Violations
98
Health-Based Violations
55
Water Source
Groundwater

System Details

System Type
Community
Owner Type
Private
Connections
25
County
Chittenden
School/Daycare
No
MCL Violations
53
Monitoring Violations
20
Treatment Tech Violations
2

Violation History

Contaminant violations recorded by EPA.

Contaminant Category Count Latest
Gross Alpha, Excl. Radon and U MCL 27 2009
Coliform (TCR) MCL 26 2004
Coliform (TCR) MR 13 1996
Tetrachloroethylene MR 4 1998
Gross Alpha, Excl. Radon and U MR 3 1997
Consumer Confidence Rule Other 2 2003
Groundwater Rule TT 2 2010

Verify This Water System

The figures above are aggregated from EPA's public databases. To verify the underlying records — or to file a complaint, request a Consumer Confidence Report, or check current monitoring status — go directly to the federal and state regulators that enforce the Safe Drinking Water Act for ST GEORGE FIRE DISTRICT #2.

Federal Source of Truth

EPA SDWIS — Federal Reports

EPA's Safe Drinking Water Information System (SDWIS) holds the federal compliance record for every regulated public water system. Open the system-level report by PWS ID:

View PWS ID VT0005094 on SDWIS

Source: EPA SDWIS Federal Reports Search

State Regulator

Vermont Drinking Water Authority

Vermont's primacy agency administers the Safe Drinking Water Act locally. Search EPA SDWIS for the current state contact, or use the state's public health or environment department portal.

Find VT regulator via EPA SDWIS

Violation Timeline

Each row links to the EPA SDWIS public record for verification. Cross-reference the contaminant code on EPA's federal report to see violation dates, return-to-compliance status, and enforcement actions.

Year (latest) Contaminant Category Count EPA Record
2010 Groundwater Rule TT 2 SDWIS / VT0005094 / 0700
2009 Gross Alpha, Excl. Radon and U MCL 27 SDWIS / VT0005094 / 4000
2004 Coliform (TCR) MCL 26 SDWIS / VT0005094 / 3100
2003 Consumer Confidence Rule Other 2 SDWIS / VT0005094 / 7000
1998 Tetrachloroethylene MR 4 SDWIS / VT0005094 / 2987
1997 Gross Alpha, Excl. Radon and U MR 3 SDWIS / VT0005094 / 4000
1996 Coliform (TCR) MR 13 SDWIS / VT0005094 / 3100

How ST GEORGE FIRE DISTRICT #2 Compares

Cross-reference this system's record against state averages and the federal MCL framework for context.

Metric ST GEORGE FIRE DISTRICT #2 Vermont avg Federal benchmark
Total violations 98 113.3 SDWA compliance — any non-zero count is a recorded breach
Health-based violations 55 12.5 Indicates a contaminant exceeded a federal MCL
PFAS detection None 8.1% EPA final rule (2024): PFOA/PFOS MCL = 4.0 ppt
Population served 72 477 Sizing context for compliance burden

Sources: EPA SDWIS and EPA National Primary Drinking Water Regulations (40 CFR Part 141). State averages computed across 1,357 regulated public water systems in Vermont.

Federal MCL reference — Safe Drinking Water Act thresholds
Contaminant Federal MCL / Action Level Note
Lead 0 mg/L (Action Level: 0.015 mg/L) Lead and Copper Rule treatment technique
Arsenic 0.010 mg/L (10 ppb) Health-based MCL since 2006
Total Coliform Treatment technique (RTCR) Indicator organism, monitoring trigger
PFOA / PFOS (PFAS) 4.0 ppt each (final 2024 rule) Compliance deadline 2029
Nitrate (as N) 10 mg/L Acute health risk for infants

Frequently Asked Questions

Is ST GEORGE FIRE DISTRICT #2 water safe to drink?
ST GEORGE FIRE DISTRICT #2 (PWS ID: VT0005094) has 98 recorded violations in the EPA SDWIS database. No PFAS contamination was detected in UCMR5 testing. This system serves 72 people using Groundwater sources.
How many people does ST GEORGE FIRE DISTRICT #2 serve?
ST GEORGE FIRE DISTRICT #2 serves 72 people in ST GEORGE, Vermont. It is a Private-owned system using Groundwater water sources with 25 service connections.
What type of violations does ST GEORGE FIRE DISTRICT #2 have?
ST GEORGE FIRE DISTRICT #2 has 98 total violations: 55 health-based violations (MCL exceedances or treatment failures), 20 monitoring/reporting violations, and 2 treatment technique violations. Health-based violations indicate contaminant levels exceeded EPA safe limits.
Has PFAS been detected in ST GEORGE FIRE DISTRICT #2 water?
No PFAS testing data is available for ST GEORGE FIRE DISTRICT #2 under the EPA's UCMR5 monitoring program.
What water source does ST GEORGE FIRE DISTRICT #2 use?
ST GEORGE FIRE DISTRICT #2 uses Groundwater as its primary water source. It is classified as a Community Water System (CWS), serving residential populations year-round.
Where does this data come from?
All data comes from the EPA Safe Drinking Water Information System (SDWIS) and the UCMR5 PFAS monitoring program. SDWIS tracks compliance for all public water systems regulated under the Safe Drinking Water Act.

Explore PlainWater

Data Sources: EPA Safe Drinking Water Information System (SDWIS), Q4 2025. This data is provided for informational purposes only.

Related

Data sourced from $official public datasets. See our methodology for details. Retrieved and formatted by PlainWater Editorial