PlainWater
StatesUtah

ANNABELLA TOWN WATER SYSTEM

PWS ID: UTAH21001 · ANNABELLA, Utah 84711

ANNABELLA TOWN WATER SYSTEM serves 860 people in ANNABELLA, Utah using Groundwater water sources. It has 97 recorded EPA violations, including 13 health-based violations. No PFAS contamination was detected in UCMR5 testing.

Water Quality Snapshot: ANNABELLA TOWN WATER SYSTEM

ANNABELLA TOWN WATER SYSTEM is a local-owned community water system that delivers drinking water to 860 residents in ANNABELLA, Utah (Sevier County) through 351 service connections. Its water is drawn from groundwater sources. EPA's Safe Drinking Water Information System records 97 total violations for this system , of which 13 (13%) are health-based — meaning a contaminant exceeded an EPA Maximum Contaminant Level or a required treatment technique failed. A further 36 monitoring and reporting violations are on file. The most recent violation on record dates to 2020.

The most frequently cited contaminant at this system is Coliform (TCR), recorded in 10 violations (MCL, health-based). This system has not yet been sampled under EPA's UCMR5 PFAS monitoring program, so no PFAS detection data is available here.

Across Utah, EPA tracks 1,068 public water systems serving 3,870,776 people, with 169,784 cumulative violations and 10,671 health-based violations on record. About 98% of systems in the state carry at least one violation, and state-wide the average per system is 159 violations. ANNABELLA TOWN WATER SYSTEM's 97 violations sit below the Utah average. Statewide, 91 of 129 UCMR5-tested systems have reported PFAS detections (70.5%). All figures above are sourced directly from EPA SDWIS and UCMR5 public data releases and are updated as EPA publishes new reporting cycles.

Population Served
860
Total Violations
97
Health-Based Violations
13
Water Source
Groundwater

System Details

System Type
Community
Owner Type
Local
Connections
351
County
Sevier
School/Daycare
No
MCL Violations
13
Monitoring Violations
36
Treatment Tech Violations
0

Violation History

Contaminant violations recorded by EPA.

Contaminant Category Count Latest
Coliform (TCR) MCL 10 2000
Coliform (TCR) MR 7 2008
Revised Total Coliform Rule RPT 6 2016
Nitrate MR 4 2012
Lead and Copper Rule MR 4 1998
Nitrate MCL 3 2020
Revised Total Coliform Rule MON 3 2017
Cadmium MR 2 1993
Arsenic MR 2 1993
Selenium MR 2 1993
Chromium MR 2 1993
Barium MR 2 1993
Fluoride MR 2 1993
Mercury MR 2 1993
CYANIDE MR 1 1993
Beryllium, Total MR 1 1993
Thallium, Total MR 1 1993
Antimony, Total MR 1 1993
Coliform (TCR) Other 1 2000

Verify This Water System

The figures above are aggregated from EPA's public databases. To verify the underlying records — or to file a complaint, request a Consumer Confidence Report, or check current monitoring status — go directly to the federal and state regulators that enforce the Safe Drinking Water Act for ANNABELLA TOWN WATER SYSTEM.

Federal Source of Truth

EPA SDWIS — Federal Reports

EPA's Safe Drinking Water Information System (SDWIS) holds the federal compliance record for every regulated public water system. Open the system-level report by PWS ID:

View PWS ID UTAH21001 on SDWIS

Source: EPA SDWIS Federal Reports Search

State Regulator

Utah Drinking Water Authority

Utah's primacy agency administers the Safe Drinking Water Act locally. Search EPA SDWIS for the current state contact, or use the state's public health or environment department portal.

Find UT regulator via EPA SDWIS

Violation Timeline

Each row links to the EPA SDWIS public record for verification. Cross-reference the contaminant code on EPA's federal report to see violation dates, return-to-compliance status, and enforcement actions.

Year (latest) Contaminant Category Count EPA Record
2020 Nitrate MCL 3 SDWIS / UTAH21001 / 1040
2017 Revised Total Coliform Rule MON 3 SDWIS / UTAH21001 / 8000
2016 Revised Total Coliform Rule RPT 6 SDWIS / UTAH21001 / 8000
2012 Nitrate MR 4 SDWIS / UTAH21001 / 1040
2008 Coliform (TCR) MR 7 SDWIS / UTAH21001 / 3100
2000 Coliform (TCR) MCL 10 SDWIS / UTAH21001 / 3100
2000 Coliform (TCR) Other 1 SDWIS / UTAH21001 / 3100
1998 Lead and Copper Rule MR 4 SDWIS / UTAH21001 / 5000
1993 Cadmium MR 2 SDWIS / UTAH21001 / 1015
1993 Arsenic MR 2 SDWIS / UTAH21001 / 1005
1993 Selenium MR 2 SDWIS / UTAH21001 / 1045
1993 Chromium MR 2 SDWIS / UTAH21001 / 1020
1993 Barium MR 2 SDWIS / UTAH21001 / 1010
1993 Fluoride MR 2 SDWIS / UTAH21001 / 1025
1993 Mercury MR 2 SDWIS / UTAH21001 / 1035

How ANNABELLA TOWN WATER SYSTEM Compares

Cross-reference this system's record against state averages and the federal MCL framework for context.

Metric ANNABELLA TOWN WATER SYSTEM Utah avg Federal benchmark
Total violations 97 159 SDWA compliance — any non-zero count is a recorded breach
Health-based violations 13 10 Indicates a contaminant exceeded a federal MCL
PFAS detection None 70.5% EPA final rule (2024): PFOA/PFOS MCL = 4.0 ppt
Population served 860 3,624 Sizing context for compliance burden

Sources: EPA SDWIS and EPA National Primary Drinking Water Regulations (40 CFR Part 141). State averages computed across 1,068 regulated public water systems in Utah.

Federal MCL reference — Safe Drinking Water Act thresholds
Contaminant Federal MCL / Action Level Note
Lead 0 mg/L (Action Level: 0.015 mg/L) Lead and Copper Rule treatment technique
Arsenic 0.010 mg/L (10 ppb) Health-based MCL since 2006
Total Coliform Treatment technique (RTCR) Indicator organism, monitoring trigger
PFOA / PFOS (PFAS) 4.0 ppt each (final 2024 rule) Compliance deadline 2029
Nitrate (as N) 10 mg/L Acute health risk for infants

Frequently Asked Questions

Is ANNABELLA TOWN WATER SYSTEM water safe to drink?
ANNABELLA TOWN WATER SYSTEM (PWS ID: UTAH21001) has 97 recorded violations in the EPA SDWIS database. No PFAS contamination was detected in UCMR5 testing. This system serves 860 people using Groundwater sources.
How many people does ANNABELLA TOWN WATER SYSTEM serve?
ANNABELLA TOWN WATER SYSTEM serves 860 people in ANNABELLA, Utah. It is a Local-owned system using Groundwater water sources with 351 service connections.
What type of violations does ANNABELLA TOWN WATER SYSTEM have?
ANNABELLA TOWN WATER SYSTEM has 97 total violations: 13 health-based violations (MCL exceedances or treatment failures), 36 monitoring/reporting violations, and 0 treatment technique violations. Health-based violations indicate contaminant levels exceeded EPA safe limits.
Has PFAS been detected in ANNABELLA TOWN WATER SYSTEM water?
No PFAS testing data is available for ANNABELLA TOWN WATER SYSTEM under the EPA's UCMR5 monitoring program.
What water source does ANNABELLA TOWN WATER SYSTEM use?
ANNABELLA TOWN WATER SYSTEM uses Groundwater as its primary water source. It is classified as a Community Water System (CWS), serving residential populations year-round.
Where does this data come from?
All data comes from the EPA Safe Drinking Water Information System (SDWIS) and the UCMR5 PFAS monitoring program. SDWIS tracks compliance for all public water systems regulated under the Safe Drinking Water Act.

Explore PlainWater

Data Sources: EPA Safe Drinking Water Information System (SDWIS), Q4 2025. This data is provided for informational purposes only.

Related

Data sourced from $official public datasets. See our methodology for details. Retrieved and formatted by Kiznis Studio Editorial