PlainWater
StatesUtah

Transient Non-Community Water System · PWS UTAH18145

Millcreek Inn

Stansbury Park, Utah 84074 - drinking water served from surface water sources to 150 people, tracked in EPA SDWIS and UCMR5.

150
People served
81
EPA violations
13
Health-based
Untested
UCMR5 result

The verdict

EPA records 81 drinking-water violations at Millcreek Inn, 16% of them health-based - below the Utah per-system average.

81
Total EPA violations on record
16%
Health-based (MCL / treatment failure)
150
People served by this system
N/A
PFAS compounds detected (UCMR5)

Water Quality Snapshot: Millcreek Inn

Millcreek Inn is a private-owned transient non-community water system that delivers drinking water to 150 residents in Stansbury Park, Utah (Salt Lake County) through 1 service connections. Its water is drawn from surface water sources. EPA's Safe Drinking Water Information System records 81 total violations for this system , of which 13 (16%) are health-based, meaning a contaminant exceeded an EPA Maximum Contaminant Level or a required treatment technique failed. A further 54 monitoring and reporting violations are on file. The most recent violation on record dates to 2018.

The most frequently cited contaminant at this system is Coliform (TCR), recorded in 35 violations (MR). This system has not yet been sampled under EPA's UCMR5 PFAS monitoring program, so no PFAS detection data is available here.

Across Utah, EPA tracks 1,068 public water systems serving 3,870,776 people, with 169,784 cumulative violations and 10,671 health-based violations on record. About 98% of systems in the state carry at least one violation, and state-wide the average per system is 159 violations. Statewide, 91 of 129 UCMR5-tested systems have reported PFAS detections (70.5%).

Millcreek Inn's 81 violations sit below the Utah average.

All figures above are sourced directly from EPA SDWIS and UCMR5 public data releases and are updated as EPA publishes new reporting cycles.

Population Served
150
Total Violations
81
Health-Based Violations
13
Water Source
Surface Water

System Details

System Type
Transient Non-Community
Owner Type
Private
Connections
1
County
Salt Lake
School/Daycare
No
MCL Violations
2
Monitoring Violations
54
Treatment Tech Violations
11

Violation History

Contaminant violations recorded by EPA.

Contaminant Category Count Latest
Coliform (TCR) MR 35 2010
Nitrate MR 13 2012
Groundwater Rule TT 11 2016
Coliform (TCR) Other 8 1999
E. COLI MR 6 2018
Revised Total Coliform Rule Other 3 2017
Coliform (TCR) MCL 2 2011

Verify This Water System

The figures above are aggregated from EPA's public databases. To verify the underlying records, or to file a complaint, request a Consumer Confidence Report, or check current monitoring status, go directly to the federal and state regulators that enforce the Safe Drinking Water Act for Millcreek Inn.

Federal Source of Truth

EPA SDWIS, Federal Reports

EPA's Safe Drinking Water Information System (SDWIS) holds the federal compliance record for every regulated public water system. Open the system-level report by PWS ID:

View PWS ID UTAH18145 on SDWIS

Source: EPA SDWIS Federal Reports Search

State Regulator

Utah Drinking Water Authority

Utah's primacy agency administers the Safe Drinking Water Act locally. Search EPA SDWIS for the current state contact, or use the state's public health or environment department portal.

Find UT regulator via EPA SDWIS

Violation Timeline

Each row links to the EPA SDWIS public record for verification. Cross-reference the contaminant code on EPA's federal report to see violation dates, return-to-compliance status, and enforcement actions.

Year (latest) Contaminant Category Count EPA Record
2018 E. COLI MR 6 SDWIS / UTAH18145 / 3014
2017 Revised Total Coliform Rule Other 3 SDWIS / UTAH18145 / 8000
2016 Groundwater Rule TT 11 SDWIS / UTAH18145 / 0700
2012 Nitrate MR 13 SDWIS / UTAH18145 / 1040
2011 Coliform (TCR) MCL 2 SDWIS / UTAH18145 / 3100
2010 Coliform (TCR) MR 35 SDWIS / UTAH18145 / 3100
1999 Coliform (TCR) Other 8 SDWIS / UTAH18145 / 3100

How Millcreek Inn Compares

Cross-reference this system's record against state averages and the federal MCL framework for context.

Metric Millcreek Inn Utah avg Federal benchmark
Total violations 81 159 SDWA compliance, any non-zero count is a recorded breach
Health-based violations 13 10 Indicates a contaminant exceeded a federal MCL
PFAS detection None 70.5% EPA final rule (2024): PFOA/PFOS MCL = 4.0 ppt
Population served 150 3,624 Sizing context for compliance burden

Sources: EPA SDWIS and EPA National Primary Drinking Water Regulations (40 CFR Part 141). State averages computed across 1,068 regulated public water systems in Utah.

Federal MCL reference, Safe Drinking Water Act thresholds
Contaminant Federal MCL / Action Level Note
Lead 0 mg/L (Action Level: 0.015 mg/L) Lead and Copper Rule treatment technique
Arsenic 0.010 mg/L (10 ppb) Health-based MCL since 2006
Total Coliform Treatment technique (RTCR) Indicator organism, monitoring trigger
PFOA / PFOS (PFAS) 4.0 ppt each (final 2024 rule) Compliance deadline 2029 (EPA proposed extending to 2031, not yet final as of May 2026)
Nitrate (as N) 10 mg/L Acute health risk for infants

Frequently Asked Questions

Is Millcreek Inn water safe to drink?
Millcreek Inn (PWS ID: UTAH18145) has 81 recorded violations in the EPA SDWIS database. No PFAS contamination was detected in UCMR5 testing. This system serves 150 people using Surface Water sources.
How many people does Millcreek Inn serve?
Millcreek Inn serves 150 people in Stansbury Park, Utah. It is a Private-owned system using Surface Water water sources with 1 service connections.
What type of violations does Millcreek Inn have?
Millcreek Inn has 81 total violations: 13 health-based violations (MCL exceedances or treatment failures), 54 monitoring/reporting violations, and 11 treatment technique violations. Health-based violations indicate contaminant levels exceeded EPA safe limits.
Has PFAS been detected in Millcreek Inn water?
No PFAS testing data is available for Millcreek Inn under the EPA's UCMR5 monitoring program.
What water source does Millcreek Inn use?
Millcreek Inn uses Surface Water as its primary water source. It is classified as a Transient Non-Community Water System, serving transient populations.
Where does this data come from?
All data comes from the EPA Safe Drinking Water Information System (SDWIS) and the UCMR5 PFAS monitoring program. SDWIS tracks compliance for all public water systems regulated under the Safe Drinking Water Act.
Data Sources: EPA Safe Drinking Water Information System (SDWIS), Q4 2025. This data is provided for informational purposes only.
Data sourced from EPA SDWIS and UCMR5 PFAS monitoring data. See our methodology for details. Retrieved and formatted by PlainWater Editorial

Every figure on PlainWater is rendered directly from EPA SDWIS drinking-water data, no number is typed in by an editor. This system's figures are rendered directly from EPA SDWIS data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.