Community Water System · PWS TX1460141
Dayton Creek Water System
Austin, Texas 78723-2476 - drinking water served from groundwater sources to 291 people, tracked in EPA SDWIS and UCMR5.
- 291
- People served
- 6
- EPA violations
- 0
- Health-based
- Untested
- UCMR5 result
The verdict
EPA records 6 drinking-water violations at Dayton Creek Water System - below the Texas per-system average.
- 6
- Total EPA violations on record
- 0%
- Health-based (MCL / treatment failure)
- 291
- People served by this system
- N/A
- PFAS compounds detected (UCMR5)
Water Quality Snapshot: Dayton Creek Water System
Dayton Creek Water System is a private-owned community water system that delivers drinking water to 291 residents in Austin, Texas (Liberty County) through 97 service connections. Its water is drawn from groundwater sources. EPA's Safe Drinking Water Information System records 6 total violations for this system , of which 0 (0%) are health-based, meaning a contaminant exceeded an EPA Maximum Contaminant Level or a required treatment technique failed. A further 4 monitoring and reporting violations are on file. The most recent violation on record dates to 2005.
The most frequently cited contaminant at this system is Coliform (TCR), recorded in 4 violations (MR). This system has not yet been sampled under EPA's UCMR5 PFAS monitoring program, so no PFAS detection data is available here.
Across Texas, EPA tracks 7,351 public water systems serving 33,253,313 people, with 746,210 cumulative violations and 162,945 health-based violations on record. About 90% of systems in the state carry at least one violation, and state-wide the average per system is 101.5 violations. Statewide, 1,068 of 1,147 UCMR5-tested systems have reported PFAS detections (93.1%).
Dayton Creek Water System's 6 violations sit below the Texas average.
All figures above are sourced directly from EPA SDWIS and UCMR5 public data releases and are updated as EPA publishes new reporting cycles.
System Details
- System Type
- Community
- Owner Type
- Private
- Connections
- 97
- County
- Liberty
- School/Daycare
- No
- MCL Violations
- 0
- Monitoring Violations
- 4
- Treatment Tech Violations
- 0
Violation History
Contaminant violations recorded by EPA.
| Contaminant | Category | Count | Latest |
|---|---|---|---|
| Coliform (TCR) | MR | 4 | 2005 |
Verify This Water System
The figures above are aggregated from EPA's public databases. To verify the underlying records, or to file a complaint, request a Consumer Confidence Report, or check current monitoring status, go directly to the federal and state regulators that enforce the Safe Drinking Water Act for Dayton Creek Water System.
EPA SDWIS, Federal Reports
EPA's Safe Drinking Water Information System (SDWIS) holds the federal compliance record for every regulated public water system. Open the system-level report by PWS ID:
View PWS ID TX1460141 on SDWISSource: EPA SDWIS Federal Reports Search
Texas Drinking Water Authority
Texas Commission on Environmental Quality (TCEQ) - Drinking Water Watch is the primacy agency that licenses and inspects Dayton Creek Water System under EPA-delegated authority.
Open TX regulator portalSource: Texas Commission on Environmental Quality (TCEQ) - Drinking Water Watch
Violation Timeline
Each row links to the EPA SDWIS public record for verification. Cross-reference the contaminant code on EPA's federal report to see violation dates, return-to-compliance status, and enforcement actions.
| Year (latest) | Contaminant | Category | Count | EPA Record |
|---|---|---|---|---|
| 2005 | Coliform (TCR) | MR | 4 | SDWIS / TX1460141 / 3100 |
How Dayton Creek Water System Compares
Cross-reference this system's record against state averages and the federal MCL framework for context.
| Metric | Dayton Creek Water System | Texas avg | Federal benchmark |
|---|---|---|---|
| Total violations | 6 | 101.5 | SDWA compliance, any non-zero count is a recorded breach |
| Health-based violations | 0 | 22.2 | Indicates a contaminant exceeded a federal MCL |
| PFAS detection | None | 93.1% | EPA final rule (2024): PFOA/PFOS MCL = 4.0 ppt |
| Population served | 291 | 4,524 | Sizing context for compliance burden |
Sources: EPA SDWIS and EPA National Primary Drinking Water Regulations (40 CFR Part 141). State averages computed across 7,351 regulated public water systems in Texas.
Federal MCL reference, Safe Drinking Water Act thresholds ▼
| Contaminant | Federal MCL / Action Level | Note |
|---|---|---|
| Lead | 0 mg/L (Action Level: 0.015 mg/L) | Lead and Copper Rule treatment technique |
| Arsenic | 0.010 mg/L (10 ppb) | Health-based MCL since 2006 |
| Total Coliform | Treatment technique (RTCR) | Indicator organism, monitoring trigger |
| PFOA / PFOS (PFAS) | 4.0 ppt each (final 2024 rule) | Compliance deadline 2029 (EPA proposed extending to 2031, not yet final as of May 2026) |
| Nitrate (as N) | 10 mg/L | Acute health risk for infants |
Frequently Asked Questions
Is Dayton Creek Water System water safe to drink? ▼
How many people does Dayton Creek Water System serve? ▼
What type of violations does Dayton Creek Water System have? ▼
Has PFAS been detected in Dayton Creek Water System water? ▼
What water source does Dayton Creek Water System use? ▼
Where does this data come from? ▼
Read our methodology - how this data is sourced, computed, and verified.
Every figure on PlainWater is rendered directly from EPA SDWIS drinking-water data, no number is typed in by an editor. This system's figures are rendered directly from EPA SDWIS data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.