PlainWater

Community Water System · PWS TX1070119

Payne Springs WSC

Mabank, Texas 75156-6435 - drinking water served from groundwater sources to 1,449 people, tracked in EPA SDWIS and UCMR5.

1,449
People served
21
EPA violations
10
Health-based
Untested
UCMR5 result

The verdict

EPA records 21 drinking-water violations at Payne Springs WSC, 48% of them health-based - below the Texas per-system average.

21
Total EPA violations on record
48%
Health-based (MCL / treatment failure)
1,449
People served by this system
N/A
PFAS compounds detected (UCMR5)

Water Quality Snapshot: Payne Springs WSC

Payne Springs WSC is a local-owned community water system that delivers drinking water to 1,449 residents in Mabank, Texas (Henderson County) through 483 service connections. Its water is drawn from groundwater sources. EPA's Safe Drinking Water Information System records 21 total violations for this system , of which 10 (48%) are health-based, meaning a contaminant exceeded an EPA Maximum Contaminant Level or a required treatment technique failed. A further 7 monitoring and reporting violations are on file. The most recent violation on record dates to 2015.

The most frequently cited contaminant at this system is TTHM, recorded in 7 violations (MCL, health-based). This system has not yet been sampled under EPA's UCMR5 PFAS monitoring program, so no PFAS detection data is available here.

Across Texas, EPA tracks 7,351 public water systems serving 33,253,313 people, with 746,210 cumulative violations and 162,945 health-based violations on record. About 90% of systems in the state carry at least one violation, and state-wide the average per system is 101.5 violations. Statewide, 1,068 of 1,147 UCMR5-tested systems have reported PFAS detections (93.1%).

Payne Springs WSC's 21 violations sit below the Texas average.

All figures above are sourced directly from EPA SDWIS and UCMR5 public data releases and are updated as EPA publishes new reporting cycles.

Population Served
1,449
Total Violations
21
Health-Based Violations
10
Water Source
Groundwater

System Details

System Type
Community
Owner Type
Local
Connections
483
County
Henderson
School/Daycare
No
MCL Violations
10
Monitoring Violations
7
Treatment Tech Violations
0

Violation History

Contaminant violations recorded by EPA.

Contaminant Category Count Latest
TTHM MCL 7 2005
Chlorine MR 4 2015
Coliform (TCR) MCL 3 2011
Coliform (TCR) MR 3 2002

Verify This Water System

The figures above are aggregated from EPA's public databases. To verify the underlying records, or to file a complaint, request a Consumer Confidence Report, or check current monitoring status, go directly to the federal and state regulators that enforce the Safe Drinking Water Act for Payne Springs WSC.

Federal Source of Truth

EPA SDWIS, Federal Reports

EPA's Safe Drinking Water Information System (SDWIS) holds the federal compliance record for every regulated public water system. Open the system-level report by PWS ID:

View PWS ID TX1070119 on SDWIS

Source: EPA SDWIS Federal Reports Search

State Regulator

Texas Drinking Water Authority

Texas Commission on Environmental Quality (TCEQ) - Drinking Water Watch is the primacy agency that licenses and inspects Payne Springs WSC under EPA-delegated authority.

Open TX regulator portal

Source: Texas Commission on Environmental Quality (TCEQ) - Drinking Water Watch

Violation Timeline

Each row links to the EPA SDWIS public record for verification. Cross-reference the contaminant code on EPA's federal report to see violation dates, return-to-compliance status, and enforcement actions.

Year (latest) Contaminant Category Count EPA Record
2015 Chlorine MR 4 SDWIS / TX1070119 / 0999
2011 Coliform (TCR) MCL 3 SDWIS / TX1070119 / 3100
2005 TTHM MCL 7 SDWIS / TX1070119 / 2950
2002 Coliform (TCR) MR 3 SDWIS / TX1070119 / 3100

How Payne Springs WSC Compares

Cross-reference this system's record against state averages and the federal MCL framework for context.

Metric Payne Springs WSC Texas avg Federal benchmark
Total violations 21 101.5 SDWA compliance, any non-zero count is a recorded breach
Health-based violations 10 22.2 Indicates a contaminant exceeded a federal MCL
PFAS detection None 93.1% EPA final rule (2024): PFOA/PFOS MCL = 4.0 ppt
Population served 1,449 4,524 Sizing context for compliance burden

Sources: EPA SDWIS and EPA National Primary Drinking Water Regulations (40 CFR Part 141). State averages computed across 7,351 regulated public water systems in Texas.

Federal MCL reference, Safe Drinking Water Act thresholds
Contaminant Federal MCL / Action Level Note
Lead 0 mg/L (Action Level: 0.015 mg/L) Lead and Copper Rule treatment technique
Arsenic 0.010 mg/L (10 ppb) Health-based MCL since 2006
Total Coliform Treatment technique (RTCR) Indicator organism, monitoring trigger
PFOA / PFOS (PFAS) 4.0 ppt each (final 2024 rule) Compliance deadline 2029 (EPA proposed extending to 2031, not yet final as of May 2026)
Nitrate (as N) 10 mg/L Acute health risk for infants

Frequently Asked Questions

Is Payne Springs WSC water safe to drink?
Payne Springs WSC (PWS ID: TX1070119) has 21 recorded violations in the EPA SDWIS database. No PFAS contamination was detected in UCMR5 testing. This system serves 1,449 people using Groundwater sources.
How many people does Payne Springs WSC serve?
Payne Springs WSC serves 1,449 people in Mabank, Texas. It is a Local-owned system using Groundwater water sources with 483 service connections.
What type of violations does Payne Springs WSC have?
Payne Springs WSC has 21 total violations: 10 health-based violations (MCL exceedances or treatment failures), 7 monitoring/reporting violations, and 0 treatment technique violations. Health-based violations indicate contaminant levels exceeded EPA safe limits.
Has PFAS been detected in Payne Springs WSC water?
No PFAS testing data is available for Payne Springs WSC under the EPA's UCMR5 monitoring program.
What water source does Payne Springs WSC use?
Payne Springs WSC uses Groundwater as its primary water source. It is classified as a Community Water System (CWS), serving residential populations year-round.
Where does this data come from?
All data comes from the EPA Safe Drinking Water Information System (SDWIS) and the UCMR5 PFAS monitoring program. SDWIS tracks compliance for all public water systems regulated under the Safe Drinking Water Act.
Data Sources: EPA Safe Drinking Water Information System (SDWIS), Q4 2025. This data is provided for informational purposes only.
Data sourced from EPA SDWIS and UCMR5 PFAS monitoring data. See our methodology for details. Retrieved and formatted by PlainWater Editorial

Every figure on PlainWater is rendered directly from EPA SDWIS drinking-water data, no number is typed in by an editor. This system's figures are rendered directly from EPA SDWIS data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.