PlainWater

Non-Transient Non-Community Water System · PWS TX0790295

Axxiom Manufacturing

Fresno, Texas 77545-2009 - drinking water served from groundwater sources to 75 people, tracked in EPA SDWIS and UCMR5.

75
People served
62
EPA violations
33
Health-based
Untested
UCMR5 result

The verdict

EPA records 62 drinking-water violations at Axxiom Manufacturing, 53% of them health-based - below the Texas per-system average.

62
Total EPA violations on record
53%
Health-based (MCL / treatment failure)
75
People served by this system
N/A
PFAS compounds detected (UCMR5)

Water Quality Snapshot: Axxiom Manufacturing

Axxiom Manufacturing is a private-owned non-transient non-community water system that delivers drinking water to 75 residents in Fresno, Texas (Fort Bend County) through 1 service connections. Its water is drawn from groundwater sources. EPA's Safe Drinking Water Information System records 62 total violations for this system , of which 33 (53%) are health-based, meaning a contaminant exceeded an EPA Maximum Contaminant Level or a required treatment technique failed. A further 16 monitoring and reporting violations are on file. The most recent violation on record dates to 2013.

The most frequently cited contaminant at this system is Arsenic, recorded in 33 violations (MCL, health-based). This system has not yet been sampled under EPA's UCMR5 PFAS monitoring program, so no PFAS detection data is available here.

Across Texas, EPA tracks 7,351 public water systems serving 33,253,313 people, with 746,210 cumulative violations and 162,945 health-based violations on record. About 90% of systems in the state carry at least one violation, and state-wide the average per system is 101.5 violations. Statewide, 610 of 1,147 UCMR5-tested systems have reported PFAS detections (53.2%).

Axxiom Manufacturing's 62 violations sit below the Texas average.

All figures above are sourced directly from EPA SDWIS and UCMR5 public data releases and are updated as EPA publishes new reporting cycles.

Population Served
75
Total Violations
62
Health-Based Violations
33
Water Source
Groundwater

System Details

System Type
Non-Transient Non-Community
Owner Type
Private
Connections
1
County
Fort Bend
School/Daycare
No
MCL Violations
33
Monitoring Violations
16
Treatment Tech Violations
0

Violation History

Contaminant violations recorded by EPA.

Contaminant Category Count Latest
Arsenic MCL 33 2012
Coliform (TCR) MR 14 2008
Public Notice Other 11 2013
Lead and Copper Rule MR 2 2013
Coliform (TCR) Other 1 1992

Verify This Water System

The figures above are aggregated from EPA's public databases. To verify the underlying records, or to file a complaint, request a Consumer Confidence Report, or check current monitoring status, go directly to the federal and state regulators that enforce the Safe Drinking Water Act for Axxiom Manufacturing.

Federal Source of Truth

EPA SDWIS, Federal Reports

EPA's Safe Drinking Water Information System (SDWIS) holds the federal compliance record for every regulated public water system. Open the system-level report by PWS ID:

View PWS ID TX0790295 on SDWIS

Source: EPA SDWIS Federal Reports Search

State Regulator

Texas Drinking Water Authority

Texas Commission on Environmental Quality (TCEQ) - Drinking Water Watch is the primacy agency that licenses and inspects Axxiom Manufacturing under EPA-delegated authority.

Open TX regulator portal

Source: Texas Commission on Environmental Quality (TCEQ) - Drinking Water Watch

Violation Timeline

Each row links to the EPA SDWIS public record for verification. Cross-reference the contaminant code on EPA's federal report to see violation dates, return-to-compliance status, and enforcement actions.

Year (latest) Contaminant Category Count EPA Record
2013 Public Notice Other 11 SDWIS / TX0790295 / 7500
2013 Lead and Copper Rule MR 2 SDWIS / TX0790295 / 5000
2012 Arsenic MCL 33 SDWIS / TX0790295 / 1005
2008 Coliform (TCR) MR 14 SDWIS / TX0790295 / 3100
1992 Coliform (TCR) Other 1 SDWIS / TX0790295 / 3100

How Axxiom Manufacturing Compares

Cross-reference this system's record against state averages and the federal MCL framework for context.

Metric Axxiom Manufacturing Texas avg Federal benchmark
Total violations 62 101.5 SDWA compliance, any non-zero count is a recorded breach
Health-based violations 33 22.2 Indicates a contaminant exceeded a federal MCL
PFAS detection None 53.2% EPA final rule (2024): PFOA/PFOS MCL = 4.0 ppt
Population served 75 4,524 Sizing context for compliance burden

Sources: EPA SDWIS and EPA National Primary Drinking Water Regulations (40 CFR Part 141). State averages computed across 7,351 regulated public water systems in Texas.

Federal MCL reference, Safe Drinking Water Act thresholds
Contaminant Federal MCL / Action Level Note
Lead 0 mg/L (Action Level: 0.015 mg/L) Lead and Copper Rule treatment technique
Arsenic 0.010 mg/L (10 ppb) Health-based MCL since 2006
Total Coliform Treatment technique (RTCR) Indicator organism, monitoring trigger
PFOA / PFOS (PFAS) 4.0 ppt each (final 2024 rule) Compliance deadline 2029 (EPA proposed extending to 2031, not yet final as of May 2026)
Nitrate (as N) 10 mg/L Acute health risk for infants

Frequently Asked Questions

Is Axxiom Manufacturing water safe to drink?
Axxiom Manufacturing (PWS ID: TX0790295) has 62 recorded violations in the EPA SDWIS database. No PFAS contamination was detected in UCMR5 testing. This system serves 75 people using Groundwater sources.
How many people does Axxiom Manufacturing serve?
Axxiom Manufacturing serves 75 people in Fresno, Texas. It is a Private-owned system using Groundwater water sources with 1 service connections.
What type of violations does Axxiom Manufacturing have?
Axxiom Manufacturing has 62 total violations: 33 health-based violations (MCL exceedances or treatment failures), 16 monitoring/reporting violations, and 0 treatment technique violations. Health-based violations indicate contaminant levels exceeded EPA safe limits.
Has PFAS been detected in Axxiom Manufacturing water?
No PFAS testing data is available for Axxiom Manufacturing under the EPA's UCMR5 monitoring program.
What water source does Axxiom Manufacturing use?
Axxiom Manufacturing uses Groundwater as its primary water source. It is classified as a Non-Transient Non-Community Water System, serving the same people for at least 6 months per year.
Where does this data come from?
All data comes from the EPA Safe Drinking Water Information System (SDWIS) and the UCMR5 PFAS monitoring program. SDWIS tracks compliance for all public water systems regulated under the Safe Drinking Water Act.
Data Sources: EPA Safe Drinking Water Information System (SDWIS), Q4 2025. This data is provided for informational purposes only.
Data sourced from EPA SDWIS and UCMR5 PFAS monitoring data. See our methodology for details. Retrieved and formatted by PlainWater Editorial

Every figure on PlainWater is rendered directly from EPA SDWIS drinking-water data, no number is typed in by an editor. This system's figures are rendered directly from EPA SDWIS data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.