PlainWater

CITY OF SANTA ANNA

PWS ID: TX0420002 · SANTA ANNA, Texas 76878-2006

CITY OF SANTA ANNA serves 1,090 people in SANTA ANNA, Texas using Surface Water water sources. It has 128 recorded EPA violations, including 89 health-based violations. No PFAS contamination was detected in UCMR5 testing.

Water Quality Snapshot: CITY OF SANTA ANNA

CITY OF SANTA ANNA is a local-owned community water system that delivers drinking water to 1,090 residents in SANTA ANNA, Texas (Coleman County) through 618 service connections. Its water is drawn from surface water sources. EPA's Safe Drinking Water Information System records 128 total violations for this system , of which 89 (70%) are health-based — meaning a contaminant exceeded an EPA Maximum Contaminant Level or a required treatment technique failed. A further 15 monitoring and reporting violations are on file. The most recent violation on record dates to 2025.

The most frequently cited contaminant at this system is TTHM, recorded in 45 violations (MCL, health-based). This system has not yet been sampled under EPA's UCMR5 PFAS monitoring program, so no PFAS detection data is available here.

Across Texas, EPA tracks 7,351 public water systems serving 33,253,313 people, with 746,210 cumulative violations and 162,945 health-based violations on record. About 90% of systems in the state carry at least one violation, and state-wide the average per system is 101.5 violations. CITY OF SANTA ANNA's 128 violations sit above the Texas average. Statewide, 1,068 of 1,147 UCMR5-tested systems have reported PFAS detections (93.1%). All figures above are sourced directly from EPA SDWIS and UCMR5 public data releases and are updated as EPA publishes new reporting cycles.

Population Served
1,090
Total Violations
128
Health-Based Violations
89
Water Source
Surface Water

System Details

System Type
Community
Owner Type
Local
Connections
618
County
Coleman
School/Daycare
No
MCL Violations
87
Monitoring Violations
15
Treatment Tech Violations
2

Violation History

Contaminant violations recorded by EPA.

Contaminant Category Count Latest
TTHM MCL 45 2007
Total Haloacetic Acids (HAA5) MCL 42 2007
Coliform (TCR) MR 11 2008
Public Notice Other 2 2025
Lead and Copper Rule MR 2 2017
LEAD AND COPPER RULE REVISIONS TT 2 2024
Consumer Confidence Rule Other 2 2020
LEAD AND COPPER RULE REVISIONS RPT 2 2024
Chlorine MR 1 2021
Surface Water Treatment Rule MR 1 2002

Verify This Water System

The figures above are aggregated from EPA's public databases. To verify the underlying records — or to file a complaint, request a Consumer Confidence Report, or check current monitoring status — go directly to the federal and state regulators that enforce the Safe Drinking Water Act for CITY OF SANTA ANNA.

Federal Source of Truth

EPA SDWIS — Federal Reports

EPA's Safe Drinking Water Information System (SDWIS) holds the federal compliance record for every regulated public water system. Open the system-level report by PWS ID:

View PWS ID TX0420002 on SDWIS

Source: EPA SDWIS Federal Reports Search

State Regulator

Texas Drinking Water Authority

Texas Commission on Environmental Quality (TCEQ) — Drinking Water Watch is the primacy agency that licenses and inspects CITY OF SANTA ANNA under EPA-delegated authority.

Open TX regulator portal

Source: Texas Commission on Environmental Quality (TCEQ) — Drinking Water Watch

Violation Timeline

Each row links to the EPA SDWIS public record for verification. Cross-reference the contaminant code on EPA's federal report to see violation dates, return-to-compliance status, and enforcement actions.

Year (latest) Contaminant Category Count EPA Record
2025 Public Notice Other 2 SDWIS / TX0420002 / 7500
2024 LEAD AND COPPER RULE REVISIONS TT 2 SDWIS / TX0420002 / 5200
2024 LEAD AND COPPER RULE REVISIONS RPT 2 SDWIS / TX0420002 / 5200
2021 Chlorine MR 1 SDWIS / TX0420002 / 0999
2020 Consumer Confidence Rule Other 2 SDWIS / TX0420002 / 7000
2017 Lead and Copper Rule MR 2 SDWIS / TX0420002 / 5000
2008 Coliform (TCR) MR 11 SDWIS / TX0420002 / 3100
2007 TTHM MCL 45 SDWIS / TX0420002 / 2950
2007 Total Haloacetic Acids (HAA5) MCL 42 SDWIS / TX0420002 / 2456
2002 Surface Water Treatment Rule MR 1 SDWIS / TX0420002 / 0200

How CITY OF SANTA ANNA Compares

Cross-reference this system's record against state averages and the federal MCL framework for context.

Metric CITY OF SANTA ANNA Texas avg Federal benchmark
Total violations 128 101.5 SDWA compliance — any non-zero count is a recorded breach
Health-based violations 89 22.2 Indicates a contaminant exceeded a federal MCL
PFAS detection None 93.1% EPA final rule (2024): PFOA/PFOS MCL = 4.0 ppt
Population served 1,090 4,524 Sizing context for compliance burden

Sources: EPA SDWIS and EPA National Primary Drinking Water Regulations (40 CFR Part 141). State averages computed across 7,351 regulated public water systems in Texas.

Federal MCL reference — Safe Drinking Water Act thresholds
Contaminant Federal MCL / Action Level Note
Lead 0 mg/L (Action Level: 0.015 mg/L) Lead and Copper Rule treatment technique
Arsenic 0.010 mg/L (10 ppb) Health-based MCL since 2006
Total Coliform Treatment technique (RTCR) Indicator organism, monitoring trigger
PFOA / PFOS (PFAS) 4.0 ppt each (final 2024 rule) Compliance deadline 2029
Nitrate (as N) 10 mg/L Acute health risk for infants

Frequently Asked Questions

Is CITY OF SANTA ANNA water safe to drink?
CITY OF SANTA ANNA (PWS ID: TX0420002) has 128 recorded violations in the EPA SDWIS database. No PFAS contamination was detected in UCMR5 testing. This system serves 1,090 people using Surface Water sources.
How many people does CITY OF SANTA ANNA serve?
CITY OF SANTA ANNA serves 1,090 people in SANTA ANNA, Texas. It is a Local-owned system using Surface Water water sources with 618 service connections.
What type of violations does CITY OF SANTA ANNA have?
CITY OF SANTA ANNA has 128 total violations: 89 health-based violations (MCL exceedances or treatment failures), 15 monitoring/reporting violations, and 2 treatment technique violations. Health-based violations indicate contaminant levels exceeded EPA safe limits.
Has PFAS been detected in CITY OF SANTA ANNA water?
No PFAS testing data is available for CITY OF SANTA ANNA under the EPA's UCMR5 monitoring program.
What water source does CITY OF SANTA ANNA use?
CITY OF SANTA ANNA uses Surface Water as its primary water source. It is classified as a Community Water System (CWS), serving residential populations year-round.
Where does this data come from?
All data comes from the EPA Safe Drinking Water Information System (SDWIS) and the UCMR5 PFAS monitoring program. SDWIS tracks compliance for all public water systems regulated under the Safe Drinking Water Act.

Explore PlainWater

Data Sources: EPA Safe Drinking Water Information System (SDWIS), Q4 2025. This data is provided for informational purposes only.

Related

Data sourced from $official public datasets. See our methodology for details. Retrieved and formatted by PlainWater Editorial