PlainWater

CITY OF QUEEN CITY

PWS ID: TX0340018 · QUEEN CITY, Texas 75572-0301

CITY OF QUEEN CITY serves 1,398 people in QUEEN CITY, Texas using Groundwater water sources. It has 195 recorded EPA violations, including 152 health-based violations. No PFAS contamination was detected in UCMR5 testing.

Water Quality Snapshot: CITY OF QUEEN CITY

CITY OF QUEEN CITY is a local-owned community water system that delivers drinking water to 1,398 residents in QUEEN CITY, Texas (Cass County) through 775 service connections. Its water is drawn from groundwater sources. EPA's Safe Drinking Water Information System records 195 total violations for this system , of which 152 (78%) are health-based — meaning a contaminant exceeded an EPA Maximum Contaminant Level or a required treatment technique failed. A further 33 monitoring and reporting violations are on file. The most recent violation on record dates to 2024.

The most frequently cited contaminant at this system is TTHM, recorded in 142 violations (MCL, health-based). This system has not yet been sampled under EPA's UCMR5 PFAS monitoring program, so no PFAS detection data is available here.

Across Texas, EPA tracks 7,351 public water systems serving 33,253,313 people, with 746,210 cumulative violations and 162,945 health-based violations on record. About 90% of systems in the state carry at least one violation, and state-wide the average per system is 101.5 violations. CITY OF QUEEN CITY's 195 violations sit above the Texas average. Statewide, 1,068 of 1,147 UCMR5-tested systems have reported PFAS detections (93.1%). All figures above are sourced directly from EPA SDWIS and UCMR5 public data releases and are updated as EPA publishes new reporting cycles.

Population Served
1,398
Total Violations
195
Health-Based Violations
152
Water Source
Groundwater

System Details

System Type
Community
Owner Type
Local
Connections
775
County
Cass
School/Daycare
No
MCL Violations
152
Monitoring Violations
33
Treatment Tech Violations
0

Violation History

Contaminant violations recorded by EPA.

Contaminant Category Count Latest
TTHM MCL 142 2011
Total Haloacetic Acids (HAA5) MCL 9 2005
Chlorine MR 8 2019
Lead and Copper Rule MR 8 2024
E. COLI MR 7 2024
Coliform (TCR) MR 6 2003
Revised Total Coliform Rule MON 4 2023
Consumer Confidence Rule Other 2 2024
Coliform (TCR) Other 2 1992
Public Notice Other 2 2020
Coliform (TCR) MCL 1 1992

Verify This Water System

The figures above are aggregated from EPA's public databases. To verify the underlying records — or to file a complaint, request a Consumer Confidence Report, or check current monitoring status — go directly to the federal and state regulators that enforce the Safe Drinking Water Act for CITY OF QUEEN CITY.

Federal Source of Truth

EPA SDWIS — Federal Reports

EPA's Safe Drinking Water Information System (SDWIS) holds the federal compliance record for every regulated public water system. Open the system-level report by PWS ID:

View PWS ID TX0340018 on SDWIS

Source: EPA SDWIS Federal Reports Search

State Regulator

Texas Drinking Water Authority

Texas Commission on Environmental Quality (TCEQ) — Drinking Water Watch is the primacy agency that licenses and inspects CITY OF QUEEN CITY under EPA-delegated authority.

Open TX regulator portal

Source: Texas Commission on Environmental Quality (TCEQ) — Drinking Water Watch

Violation Timeline

Each row links to the EPA SDWIS public record for verification. Cross-reference the contaminant code on EPA's federal report to see violation dates, return-to-compliance status, and enforcement actions.

Year (latest) Contaminant Category Count EPA Record
2024 Lead and Copper Rule MR 8 SDWIS / TX0340018 / 5000
2024 E. COLI MR 7 SDWIS / TX0340018 / 3014
2024 Consumer Confidence Rule Other 2 SDWIS / TX0340018 / 7000
2023 Revised Total Coliform Rule MON 4 SDWIS / TX0340018 / 8000
2020 Public Notice Other 2 SDWIS / TX0340018 / 7500
2019 Chlorine MR 8 SDWIS / TX0340018 / 0999
2011 TTHM MCL 142 SDWIS / TX0340018 / 2950
2005 Total Haloacetic Acids (HAA5) MCL 9 SDWIS / TX0340018 / 2456
2003 Coliform (TCR) MR 6 SDWIS / TX0340018 / 3100
1992 Coliform (TCR) Other 2 SDWIS / TX0340018 / 3100
1992 Coliform (TCR) MCL 1 SDWIS / TX0340018 / 3100

How CITY OF QUEEN CITY Compares

Cross-reference this system's record against state averages and the federal MCL framework for context.

Metric CITY OF QUEEN CITY Texas avg Federal benchmark
Total violations 195 101.5 SDWA compliance — any non-zero count is a recorded breach
Health-based violations 152 22.2 Indicates a contaminant exceeded a federal MCL
PFAS detection None 93.1% EPA final rule (2024): PFOA/PFOS MCL = 4.0 ppt
Population served 1,398 4,524 Sizing context for compliance burden

Sources: EPA SDWIS and EPA National Primary Drinking Water Regulations (40 CFR Part 141). State averages computed across 7,351 regulated public water systems in Texas.

Federal MCL reference — Safe Drinking Water Act thresholds
Contaminant Federal MCL / Action Level Note
Lead 0 mg/L (Action Level: 0.015 mg/L) Lead and Copper Rule treatment technique
Arsenic 0.010 mg/L (10 ppb) Health-based MCL since 2006
Total Coliform Treatment technique (RTCR) Indicator organism, monitoring trigger
PFOA / PFOS (PFAS) 4.0 ppt each (final 2024 rule) Compliance deadline 2029
Nitrate (as N) 10 mg/L Acute health risk for infants

Frequently Asked Questions

Is CITY OF QUEEN CITY water safe to drink?
CITY OF QUEEN CITY (PWS ID: TX0340018) has 195 recorded violations in the EPA SDWIS database. No PFAS contamination was detected in UCMR5 testing. This system serves 1,398 people using Groundwater sources.
How many people does CITY OF QUEEN CITY serve?
CITY OF QUEEN CITY serves 1,398 people in QUEEN CITY, Texas. It is a Local-owned system using Groundwater water sources with 775 service connections.
What type of violations does CITY OF QUEEN CITY have?
CITY OF QUEEN CITY has 195 total violations: 152 health-based violations (MCL exceedances or treatment failures), 33 monitoring/reporting violations, and 0 treatment technique violations. Health-based violations indicate contaminant levels exceeded EPA safe limits.
Has PFAS been detected in CITY OF QUEEN CITY water?
No PFAS testing data is available for CITY OF QUEEN CITY under the EPA's UCMR5 monitoring program.
What water source does CITY OF QUEEN CITY use?
CITY OF QUEEN CITY uses Groundwater as its primary water source. It is classified as a Community Water System (CWS), serving residential populations year-round.
Where does this data come from?
All data comes from the EPA Safe Drinking Water Information System (SDWIS) and the UCMR5 PFAS monitoring program. SDWIS tracks compliance for all public water systems regulated under the Safe Drinking Water Act.

Explore PlainWater

Data Sources: EPA Safe Drinking Water Information System (SDWIS), Q4 2025. This data is provided for informational purposes only.

Related

Data sourced from $official public datasets. See our methodology for details. Retrieved and formatted by PlainWater Editorial