PlainWater

LINDSAY PWA

PWS ID: OK2002501 · LINDSAY, Oklahoma 73052

LINDSAY PWA serves 2,850 people in LINDSAY, Oklahoma using Groundwater water sources. It has 56 recorded EPA violations, including 11 health-based violations. No PFAS contamination was detected in UCMR5 testing.

Water Quality Snapshot: LINDSAY PWA

LINDSAY PWA is a local-owned community water system that delivers drinking water to 2,850 residents in LINDSAY, Oklahoma (Garvin County) through 1,572 service connections. Its water is drawn from groundwater sources. EPA's Safe Drinking Water Information System records 56 total violations for this system , of which 11 (20%) are health-based — meaning a contaminant exceeded an EPA Maximum Contaminant Level or a required treatment technique failed. A further 34 monitoring and reporting violations are on file. The most recent violation on record dates to 2019.

The most frequently cited contaminant at this system is Coliform (TCR), recorded in 11 violations (MCL, health-based). This system has not yet been sampled under EPA's UCMR5 PFAS monitoring program, so no PFAS detection data is available here.

Across Oklahoma, EPA tracks 1,262 public water systems serving 3,699,452 people, with 336,706 cumulative violations and 113,804 health-based violations on record. About 98% of systems in the state carry at least one violation, and state-wide the average per system is 266.8 violations. LINDSAY PWA's 56 violations sit below the Oklahoma average. Statewide, 101 of 166 UCMR5-tested systems have reported PFAS detections (60.8%). All figures above are sourced directly from EPA SDWIS and UCMR5 public data releases and are updated as EPA publishes new reporting cycles.

Population Served
2,850
Total Violations
56
Health-Based Violations
11
Water Source
Groundwater

System Details

System Type
Community
Owner Type
Local
Connections
1,572
County
Garvin
School/Daycare
No
MCL Violations
11
Monitoring Violations
34
Treatment Tech Violations
0

Violation History

Contaminant violations recorded by EPA.

Contaminant Category Count Latest
Coliform (TCR) MCL 11 2007
Total Polychlorinated Biphenyls (PCB) MR 5 2018
Gross Alpha, Excl. Radon and U MR 4 2008
Gross Beta Particle Activity MR 4 2008
TTHM MR 4 2019
Total Haloacetic Acids (HAA5) MR 4 2019
Combined Uranium MR 4 2008
Combined Radium (-226 and -228) MR 4 2008
Coliform (TCR) MR 3 1998
Lead and Copper Rule MR 2 1994

Verify This Water System

The figures above are aggregated from EPA's public databases. To verify the underlying records — or to file a complaint, request a Consumer Confidence Report, or check current monitoring status — go directly to the federal and state regulators that enforce the Safe Drinking Water Act for LINDSAY PWA.

Federal Source of Truth

EPA SDWIS — Federal Reports

EPA's Safe Drinking Water Information System (SDWIS) holds the federal compliance record for every regulated public water system. Open the system-level report by PWS ID:

View PWS ID OK2002501 on SDWIS

Source: EPA SDWIS Federal Reports Search

State Regulator

Oklahoma Drinking Water Authority

Oklahoma's primacy agency administers the Safe Drinking Water Act locally. Search EPA SDWIS for the current state contact, or use the state's public health or environment department portal.

Find OK regulator via EPA SDWIS

Violation Timeline

Each row links to the EPA SDWIS public record for verification. Cross-reference the contaminant code on EPA's federal report to see violation dates, return-to-compliance status, and enforcement actions.

Year (latest) Contaminant Category Count EPA Record
2019 TTHM MR 4 SDWIS / OK2002501 / 2950
2019 Total Haloacetic Acids (HAA5) MR 4 SDWIS / OK2002501 / 2456
2018 Total Polychlorinated Biphenyls (PCB) MR 5 SDWIS / OK2002501 / 2383
2008 Gross Alpha, Excl. Radon and U MR 4 SDWIS / OK2002501 / 4000
2008 Gross Beta Particle Activity MR 4 SDWIS / OK2002501 / 4100
2008 Combined Uranium MR 4 SDWIS / OK2002501 / 4006
2008 Combined Radium (-226 and -228) MR 4 SDWIS / OK2002501 / 4010
2007 Coliform (TCR) MCL 11 SDWIS / OK2002501 / 3100
1998 Coliform (TCR) MR 3 SDWIS / OK2002501 / 3100
1994 Lead and Copper Rule MR 2 SDWIS / OK2002501 / 5000

How LINDSAY PWA Compares

Cross-reference this system's record against state averages and the federal MCL framework for context.

Metric LINDSAY PWA Oklahoma avg Federal benchmark
Total violations 56 266.8 SDWA compliance — any non-zero count is a recorded breach
Health-based violations 11 90.2 Indicates a contaminant exceeded a federal MCL
PFAS detection None 60.8% EPA final rule (2024): PFOA/PFOS MCL = 4.0 ppt
Population served 2,850 2,931 Sizing context for compliance burden

Sources: EPA SDWIS and EPA National Primary Drinking Water Regulations (40 CFR Part 141). State averages computed across 1,262 regulated public water systems in Oklahoma.

Federal MCL reference — Safe Drinking Water Act thresholds
Contaminant Federal MCL / Action Level Note
Lead 0 mg/L (Action Level: 0.015 mg/L) Lead and Copper Rule treatment technique
Arsenic 0.010 mg/L (10 ppb) Health-based MCL since 2006
Total Coliform Treatment technique (RTCR) Indicator organism, monitoring trigger
PFOA / PFOS (PFAS) 4.0 ppt each (final 2024 rule) Compliance deadline 2029
Nitrate (as N) 10 mg/L Acute health risk for infants

Frequently Asked Questions

Is LINDSAY PWA water safe to drink?
LINDSAY PWA (PWS ID: OK2002501) has 56 recorded violations in the EPA SDWIS database. No PFAS contamination was detected in UCMR5 testing. This system serves 2,850 people using Groundwater sources.
How many people does LINDSAY PWA serve?
LINDSAY PWA serves 2,850 people in LINDSAY, Oklahoma. It is a Local-owned system using Groundwater water sources with 1,572 service connections.
What type of violations does LINDSAY PWA have?
LINDSAY PWA has 56 total violations: 11 health-based violations (MCL exceedances or treatment failures), 34 monitoring/reporting violations, and 0 treatment technique violations. Health-based violations indicate contaminant levels exceeded EPA safe limits.
Has PFAS been detected in LINDSAY PWA water?
No PFAS testing data is available for LINDSAY PWA under the EPA's UCMR5 monitoring program.
What water source does LINDSAY PWA use?
LINDSAY PWA uses Groundwater as its primary water source. It is classified as a Community Water System (CWS), serving residential populations year-round.
Where does this data come from?
All data comes from the EPA Safe Drinking Water Information System (SDWIS) and the UCMR5 PFAS monitoring program. SDWIS tracks compliance for all public water systems regulated under the Safe Drinking Water Act.

Explore PlainWater

Data Sources: EPA Safe Drinking Water Information System (SDWIS), Q4 2025. This data is provided for informational purposes only.

Related

Data sourced from $official public datasets. See our methodology for details. Retrieved and formatted by Kiznis Studio Editorial