PlainWater
States → Ohio

MERCURY PLASTICS FABRICATION

PWS ID: OH2844822 · MIDDLEFIELD, Ohio 44062

MERCURY PLASTICS FABRICATION serves 150 people in MIDDLEFIELD, Ohio using Groundwater water sources. It has 143 recorded EPA violations, including 0 health-based violations. No PFAS contamination was detected in UCMR5 testing.

Water Quality Snapshot: MERCURY PLASTICS FABRICATION

MERCURY PLASTICS FABRICATION is a private-owned non-transient non-community water system that delivers drinking water to 150 residents in MIDDLEFIELD, Ohio (Geauga County) through 1 service connections. Its water is drawn from groundwater sources. EPA's Safe Drinking Water Information System records 143 total violations for this system , of which 0 (0%) are health-based — meaning a contaminant exceeded an EPA Maximum Contaminant Level or a required treatment technique failed. A further 142 monitoring and reporting violations are on file. The most recent violation on record dates to 2012.

The most frequently cited contaminant at this system is Coliform (TCR), recorded in 9 violations (MR). This system has not yet been sampled under EPA's UCMR5 PFAS monitoring program, so no PFAS detection data is available here.

Across Ohio, EPA tracks 4,181 public water systems serving 11,085,226 people, with 288,388 cumulative violations and 52,412 health-based violations on record. About 90% of systems in the state carry at least one violation, and state-wide the average per system is 69 violations. MERCURY PLASTICS FABRICATION's 143 violations sit above the Ohio average. Statewide, 204 of 346 UCMR5-tested systems have reported PFAS detections (59%). All figures above are sourced directly from EPA SDWIS and UCMR5 public data releases and are updated as EPA publishes new reporting cycles.

Population Served
150
Total Violations
143
Health-Based Violations
0
Water Source
Groundwater

System Details

System Type
Non-Transient Non-Community
Owner Type
Private
Connections
1
County
Geauga
School/Daycare
No
MCL Violations
0
Monitoring Violations
142
Treatment Tech Violations
0

Violation History

Contaminant violations recorded by EPA.

Contaminant Category Count Latest
Coliform (TCR) MR 9 2003
Lead and Copper Rule MR 7 1998
1,2,4-Trichlorobenzene MR 6 2012
Xylenes, Total MR 6 2012
DICHLOROMETHANE MR 6 2012
p-Dichlorobenzene MR 6 2012
Vinyl chloride MR 6 2012
trans-1,2-Dichloroethylene MR 6 2012
1,2-Dichloroethane MR 6 2012
Carbon tetrachloride MR 6 2012
1,2-Dichloropropane MR 6 2012
1,1,2-Trichloroethane MR 6 2012
Tetrachloroethylene MR 6 2012
Benzene MR 6 2012
Styrene MR 6 2012
o-Dichlorobenzene MR 6 2012
Toluene MR 6 2012
1,1,1-Trichloroethane MR 6 2012
cis-1,2-Dichloroethylene MR 6 2012
1,1-Dichloroethylene MR 6 2012
Ethylbenzene MR 6 2012
CHLOROBENZENE MR 6 2012
Trichloroethylene MR 6 2012

Verify This Water System

The figures above are aggregated from EPA's public databases. To verify the underlying records — or to file a complaint, request a Consumer Confidence Report, or check current monitoring status — go directly to the federal and state regulators that enforce the Safe Drinking Water Act for MERCURY PLASTICS FABRICATION.

Federal Source of Truth

EPA SDWIS — Federal Reports

EPA's Safe Drinking Water Information System (SDWIS) holds the federal compliance record for every regulated public water system. Open the system-level report by PWS ID:

View PWS ID OH2844822 on SDWIS

Source: EPA SDWIS Federal Reports Search

State Regulator

Ohio Drinking Water Authority

Ohio EPA — Division of Drinking and Ground Waters is the primacy agency that licenses and inspects MERCURY PLASTICS FABRICATION under EPA-delegated authority.

Open OH regulator portal

Source: Ohio EPA — Division of Drinking and Ground Waters

Violation Timeline

Each row links to the EPA SDWIS public record for verification. Cross-reference the contaminant code on EPA's federal report to see violation dates, return-to-compliance status, and enforcement actions.

Year (latest) Contaminant Category Count EPA Record
2012 1,2,4-Trichlorobenzene MR 6 SDWIS / OH2844822 / 2378
2012 Xylenes, Total MR 6 SDWIS / OH2844822 / 2955
2012 DICHLOROMETHANE MR 6 SDWIS / OH2844822 / 2964
2012 p-Dichlorobenzene MR 6 SDWIS / OH2844822 / 2969
2012 Vinyl chloride MR 6 SDWIS / OH2844822 / 2976
2012 trans-1,2-Dichloroethylene MR 6 SDWIS / OH2844822 / 2979
2012 1,2-Dichloroethane MR 6 SDWIS / OH2844822 / 2980
2012 Carbon tetrachloride MR 6 SDWIS / OH2844822 / 2982
2012 1,2-Dichloropropane MR 6 SDWIS / OH2844822 / 2983
2012 1,1,2-Trichloroethane MR 6 SDWIS / OH2844822 / 2985
2012 Tetrachloroethylene MR 6 SDWIS / OH2844822 / 2987
2012 Benzene MR 6 SDWIS / OH2844822 / 2990
2012 Styrene MR 6 SDWIS / OH2844822 / 2996
2012 o-Dichlorobenzene MR 6 SDWIS / OH2844822 / 2968
2012 Toluene MR 6 SDWIS / OH2844822 / 2991

How MERCURY PLASTICS FABRICATION Compares

Cross-reference this system's record against state averages and the federal MCL framework for context.

Metric MERCURY PLASTICS FABRICATION Ohio avg Federal benchmark
Total violations 143 69 SDWA compliance — any non-zero count is a recorded breach
Health-based violations 0 12.5 Indicates a contaminant exceeded a federal MCL
PFAS detection None 59% EPA final rule (2024): PFOA/PFOS MCL = 4.0 ppt
Population served 150 2,651 Sizing context for compliance burden

Sources: EPA SDWIS and EPA National Primary Drinking Water Regulations (40 CFR Part 141). State averages computed across 4,181 regulated public water systems in Ohio.

Federal MCL reference — Safe Drinking Water Act thresholds ▼
Contaminant Federal MCL / Action Level Note
Lead 0 mg/L (Action Level: 0.015 mg/L) Lead and Copper Rule treatment technique
Arsenic 0.010 mg/L (10 ppb) Health-based MCL since 2006
Total Coliform Treatment technique (RTCR) Indicator organism, monitoring trigger
PFOA / PFOS (PFAS) 4.0 ppt each (final 2024 rule) Compliance deadline 2029
Nitrate (as N) 10 mg/L Acute health risk for infants

Frequently Asked Questions

Is MERCURY PLASTICS FABRICATION water safe to drink? ▼
MERCURY PLASTICS FABRICATION (PWS ID: OH2844822) has 143 recorded violations in the EPA SDWIS database. No PFAS contamination was detected in UCMR5 testing. This system serves 150 people using Groundwater sources.
How many people does MERCURY PLASTICS FABRICATION serve? ▼
MERCURY PLASTICS FABRICATION serves 150 people in MIDDLEFIELD, Ohio. It is a Private-owned system using Groundwater water sources with 1 service connections.
What type of violations does MERCURY PLASTICS FABRICATION have? ▼
MERCURY PLASTICS FABRICATION has 143 total violations: 0 health-based violations (MCL exceedances or treatment failures), 142 monitoring/reporting violations, and 0 treatment technique violations. Health-based violations indicate contaminant levels exceeded EPA safe limits.
Has PFAS been detected in MERCURY PLASTICS FABRICATION water? ▼
No PFAS testing data is available for MERCURY PLASTICS FABRICATION under the EPA's UCMR5 monitoring program.
What water source does MERCURY PLASTICS FABRICATION use? ▼
MERCURY PLASTICS FABRICATION uses Groundwater as its primary water source. It is classified as a Non-Transient Non-Community Water System, serving the same people for at least 6 months per year.
Where does this data come from? ▼
All data comes from the EPA Safe Drinking Water Information System (SDWIS) and the UCMR5 PFAS monitoring program. SDWIS tracks compliance for all public water systems regulated under the Safe Drinking Water Act.

Explore PlainWater

Water in Ohio

All systems in state
All States

Water quality by state
Contaminants

PFAS & other pollutants
Guides

Understanding water quality

Related Data for Ohio

Environmental Data → Natural Hazards → Air Quality → Healthcare Access → Climate Data →
Data Sources: EPA Safe Drinking Water Information System (SDWIS), Q4 2025. This data is provided for informational purposes only.

Read our methodology — how this data is sourced, computed, and verified.

Related

Browse all → | Rankings →
Data sourced from $official public datasets. See our methodology for details. Retrieved and formatted by PlainWater Editorial