PlainWater

DANNEMORA WD # 2

PWS ID: NY0900230 · New York

DANNEMORA WD # 2 serves 175 people in New York using Groundwater water sources. It has 223 recorded EPA violations, including 5 health-based violations. No PFAS contamination was detected in UCMR5 testing.

Water Quality Snapshot: DANNEMORA WD # 2

DANNEMORA WD # 2 is a local-owned community water system that delivers drinking water to 175 residents in New York (Clinton County) through 50 service connections. Its water is drawn from groundwater sources. EPA's Safe Drinking Water Information System records 223 total violations for this system , of which 5 (2%) are health-based — meaning a contaminant exceeded an EPA Maximum Contaminant Level or a required treatment technique failed. A further 140 monitoring and reporting violations are on file. The most recent violation on record dates to 2023.

The most frequently cited contaminant at this system is Coliform (TCR), recorded in 105 violations (MR). This system has not yet been sampled under EPA's UCMR5 PFAS monitoring program, so no PFAS detection data is available here.

Across New York, EPA tracks 8,098 public water systems serving 19,294,951 people, with 552,003 cumulative violations and 26,817 health-based violations on record. About 94% of systems in the state carry at least one violation, and state-wide the average per system is 68.2 violations. DANNEMORA WD # 2's 223 violations sit above the New York average. Statewide, 129 of 332 UCMR5-tested systems have reported PFAS detections (38.9%). All figures above are sourced directly from EPA SDWIS and UCMR5 public data releases and are updated as EPA publishes new reporting cycles.

Population Served
175
Total Violations
223
Health-Based Violations
5
Water Source
Groundwater

System Details

System Type
Community
Owner Type
Local
Connections
50
County
Clinton
School/Daycare
No
MCL Violations
5
Monitoring Violations
140
Treatment Tech Violations
0

Violation History

Contaminant violations recorded by EPA.

Contaminant Category Count Latest
Coliform (TCR) MR 105 2010
Lead and Copper Rule MR 11 2018
Consumer Confidence Rule Other 7 2010
Total Haloacetic Acids (HAA5) MR 5 2018
Coliform (TCR) MCL 5 2000
Revised Total Coliform Rule MON 4 2023
Nitrate MR 4 1998
TTHM MR 3 2014
Fluoride MR 1 1983
Arsenic MR 1 1983
Barium MR 1 1983
Cadmium MR 1 1983
Mercury MR 1 1983
Chromium MR 1 1983
Selenium MR 1 1983
Asbestos MR 1 1995

Verify This Water System

The figures above are aggregated from EPA's public databases. To verify the underlying records — or to file a complaint, request a Consumer Confidence Report, or check current monitoring status — go directly to the federal and state regulators that enforce the Safe Drinking Water Act for DANNEMORA WD # 2.

Federal Source of Truth

EPA SDWIS — Federal Reports

EPA's Safe Drinking Water Information System (SDWIS) holds the federal compliance record for every regulated public water system. Open the system-level report by PWS ID:

View PWS ID NY0900230 on SDWIS

Source: EPA SDWIS Federal Reports Search

State Regulator

New York Drinking Water Authority

New York State Department of Health — Public Water Systems is the primacy agency that licenses and inspects DANNEMORA WD # 2 under EPA-delegated authority.

Open NY regulator portal

Source: New York State Department of Health — Public Water Systems

Violation Timeline

Each row links to the EPA SDWIS public record for verification. Cross-reference the contaminant code on EPA's federal report to see violation dates, return-to-compliance status, and enforcement actions.

Year (latest) Contaminant Category Count EPA Record
2023 Revised Total Coliform Rule MON 4 SDWIS / NY0900230 / 8000
2018 Lead and Copper Rule MR 11 SDWIS / NY0900230 / 5000
2018 Total Haloacetic Acids (HAA5) MR 5 SDWIS / NY0900230 / 2456
2014 TTHM MR 3 SDWIS / NY0900230 / 2950
2010 Coliform (TCR) MR 105 SDWIS / NY0900230 / 3100
2010 Consumer Confidence Rule Other 7 SDWIS / NY0900230 / 7000
2000 Coliform (TCR) MCL 5 SDWIS / NY0900230 / 3100
1998 Nitrate MR 4 SDWIS / NY0900230 / 1040
1995 Asbestos MR 1 SDWIS / NY0900230 / 1094
1983 Fluoride MR 1 SDWIS / NY0900230 / 1025
1983 Arsenic MR 1 SDWIS / NY0900230 / 1005
1983 Barium MR 1 SDWIS / NY0900230 / 1010
1983 Cadmium MR 1 SDWIS / NY0900230 / 1015
1983 Mercury MR 1 SDWIS / NY0900230 / 1035
1983 Chromium MR 1 SDWIS / NY0900230 / 1020

How DANNEMORA WD # 2 Compares

Cross-reference this system's record against state averages and the federal MCL framework for context.

Metric DANNEMORA WD # 2 New York avg Federal benchmark
Total violations 223 68.2 SDWA compliance — any non-zero count is a recorded breach
Health-based violations 5 3.3 Indicates a contaminant exceeded a federal MCL
PFAS detection None 38.9% EPA final rule (2024): PFOA/PFOS MCL = 4.0 ppt
Population served 175 2,383 Sizing context for compliance burden

Sources: EPA SDWIS and EPA National Primary Drinking Water Regulations (40 CFR Part 141). State averages computed across 8,098 regulated public water systems in New York.

Federal MCL reference — Safe Drinking Water Act thresholds
Contaminant Federal MCL / Action Level Note
Lead 0 mg/L (Action Level: 0.015 mg/L) Lead and Copper Rule treatment technique
Arsenic 0.010 mg/L (10 ppb) Health-based MCL since 2006
Total Coliform Treatment technique (RTCR) Indicator organism, monitoring trigger
PFOA / PFOS (PFAS) 4.0 ppt each (final 2024 rule) Compliance deadline 2029
Nitrate (as N) 10 mg/L Acute health risk for infants

Frequently Asked Questions

Is DANNEMORA WD # 2 water safe to drink?
DANNEMORA WD # 2 (PWS ID: NY0900230) has 223 recorded violations in the EPA SDWIS database. No PFAS contamination was detected in UCMR5 testing. This system serves 175 people using Groundwater sources.
How many people does DANNEMORA WD # 2 serve?
DANNEMORA WD # 2 serves 175 people in New York. It is a Local-owned system using Groundwater water sources with 50 service connections.
What type of violations does DANNEMORA WD # 2 have?
DANNEMORA WD # 2 has 223 total violations: 5 health-based violations (MCL exceedances or treatment failures), 140 monitoring/reporting violations, and 0 treatment technique violations. Health-based violations indicate contaminant levels exceeded EPA safe limits.
Has PFAS been detected in DANNEMORA WD # 2 water?
No PFAS testing data is available for DANNEMORA WD # 2 under the EPA's UCMR5 monitoring program.
What water source does DANNEMORA WD # 2 use?
DANNEMORA WD # 2 uses Groundwater as its primary water source. It is classified as a Community Water System (CWS), serving residential populations year-round.
Where does this data come from?
All data comes from the EPA Safe Drinking Water Information System (SDWIS) and the UCMR5 PFAS monitoring program. SDWIS tracks compliance for all public water systems regulated under the Safe Drinking Water Act.

Explore PlainWater

Data Sources: EPA Safe Drinking Water Information System (SDWIS), Q4 2025. This data is provided for informational purposes only.

Related

Data sourced from $official public datasets. See our methodology for details. Retrieved and formatted by PlainWater Editorial