PlainWater

Community Water System · PWS NH0091010

Antrim Sewer and Water Dept

Antrim, New Hampshire 03440 - drinking water served from groundwater sources to 920 people, tracked in EPA SDWIS and UCMR5.

920
People served
58
EPA violations
46
Health-based
Untested
UCMR5 result

The verdict

EPA records 58 drinking-water violations at Antrim Sewer and Water Dept, 79% of them health-based - below the New Hampshire per-system average.

58
Total EPA violations on record
79%
Health-based (MCL / treatment failure)
920
People served by this system
N/A
PFAS compounds detected (UCMR5)

Water Quality Snapshot: Antrim Sewer and Water Dept

Antrim Sewer and Water Dept is a local-owned community water system that delivers drinking water to 920 residents in Antrim, New Hampshire (Hillsborough County) through 368 service connections. Its water is drawn from groundwater sources. EPA's Safe Drinking Water Information System records 58 total violations for this system , of which 46 (79%) are health-based, meaning a contaminant exceeded an EPA Maximum Contaminant Level or a required treatment technique failed. A further 4 monitoring and reporting violations are on file. The most recent violation on record dates to 2017.

The most frequently cited contaminant at this system is Coliform (TCR), recorded in 46 violations (MCL, health-based). This system has not yet been sampled under EPA's UCMR5 PFAS monitoring program, so no PFAS detection data is available here.

Across New Hampshire, EPA tracks 2,453 public water systems serving 1,242,123 people, with 155,970 cumulative violations and 29,649 health-based violations on record. About 90% of systems in the state carry at least one violation, and state-wide the average per system is 63.6 violations. Statewide, 23 of 51 UCMR5-tested systems have reported PFAS detections (45.1%).

Antrim Sewer and Water Dept's 58 violations sit below the New Hampshire average.

All figures above are sourced directly from EPA SDWIS and UCMR5 public data releases and are updated as EPA publishes new reporting cycles.

Population Served
920
Total Violations
58
Health-Based Violations
46
Water Source
Groundwater

System Details

System Type
Community
Owner Type
Local
Connections
368
County
Hillsborough
School/Daycare
No
MCL Violations
46
Monitoring Violations
4
Treatment Tech Violations
0

Violation History

Contaminant violations recorded by EPA.

Contaminant Category Count Latest
Coliform (TCR) MCL 46 2014
E. COLI MR 4 2017

Verify This Water System

The figures above are aggregated from EPA's public databases. To verify the underlying records, or to file a complaint, request a Consumer Confidence Report, or check current monitoring status, go directly to the federal and state regulators that enforce the Safe Drinking Water Act for Antrim Sewer and Water Dept.

Federal Source of Truth

EPA SDWIS, Federal Reports

EPA's Safe Drinking Water Information System (SDWIS) holds the federal compliance record for every regulated public water system. Open the system-level report by PWS ID:

View PWS ID NH0091010 on SDWIS

Source: EPA SDWIS Federal Reports Search

State Regulator

New Hampshire Drinking Water Authority

New Hampshire's primacy agency administers the Safe Drinking Water Act locally. Search EPA SDWIS for the current state contact, or use the state's public health or environment department portal.

Find NH regulator via EPA SDWIS

Violation Timeline

Each row links to the EPA SDWIS public record for verification. Cross-reference the contaminant code on EPA's federal report to see violation dates, return-to-compliance status, and enforcement actions.

Year (latest) Contaminant Category Count EPA Record
2017 E. COLI MR 4 SDWIS / NH0091010 / 3014
2014 Coliform (TCR) MCL 46 SDWIS / NH0091010 / 3100

How Antrim Sewer and Water Dept Compares

Cross-reference this system's record against state averages and the federal MCL framework for context.

Metric Antrim Sewer and Water Dept New Hampshire avg Federal benchmark
Total violations 58 63.6 SDWA compliance, any non-zero count is a recorded breach
Health-based violations 46 12.1 Indicates a contaminant exceeded a federal MCL
PFAS detection None 45.1% EPA final rule (2024): PFOA/PFOS MCL = 4.0 ppt
Population served 920 506 Sizing context for compliance burden

Sources: EPA SDWIS and EPA National Primary Drinking Water Regulations (40 CFR Part 141). State averages computed across 2,453 regulated public water systems in New Hampshire.

Federal MCL reference, Safe Drinking Water Act thresholds
Contaminant Federal MCL / Action Level Note
Lead 0 mg/L (Action Level: 0.015 mg/L) Lead and Copper Rule treatment technique
Arsenic 0.010 mg/L (10 ppb) Health-based MCL since 2006
Total Coliform Treatment technique (RTCR) Indicator organism, monitoring trigger
PFOA / PFOS (PFAS) 4.0 ppt each (final 2024 rule) Compliance deadline 2029 (EPA proposed extending to 2031, not yet final as of May 2026)
Nitrate (as N) 10 mg/L Acute health risk for infants

Frequently Asked Questions

Is Antrim Sewer and Water Dept water safe to drink?
Antrim Sewer and Water Dept (PWS ID: NH0091010) has 58 recorded violations in the EPA SDWIS database. No PFAS contamination was detected in UCMR5 testing. This system serves 920 people using Groundwater sources.
How many people does Antrim Sewer and Water Dept serve?
Antrim Sewer and Water Dept serves 920 people in Antrim, New Hampshire. It is a Local-owned system using Groundwater water sources with 368 service connections.
What type of violations does Antrim Sewer and Water Dept have?
Antrim Sewer and Water Dept has 58 total violations: 46 health-based violations (MCL exceedances or treatment failures), 4 monitoring/reporting violations, and 0 treatment technique violations. Health-based violations indicate contaminant levels exceeded EPA safe limits.
Has PFAS been detected in Antrim Sewer and Water Dept water?
No PFAS testing data is available for Antrim Sewer and Water Dept under the EPA's UCMR5 monitoring program.
What water source does Antrim Sewer and Water Dept use?
Antrim Sewer and Water Dept uses Groundwater as its primary water source. It is classified as a Community Water System (CWS), serving residential populations year-round.
Where does this data come from?
All data comes from the EPA Safe Drinking Water Information System (SDWIS) and the UCMR5 PFAS monitoring program. SDWIS tracks compliance for all public water systems regulated under the Safe Drinking Water Act.
Data Sources: EPA Safe Drinking Water Information System (SDWIS), Q4 2025. This data is provided for informational purposes only.
Data sourced from EPA SDWIS and UCMR5 PFAS monitoring data. See our methodology for details. Retrieved and formatted by PlainWater Editorial

Every figure on PlainWater is rendered directly from EPA SDWIS drinking-water data, no number is typed in by an editor. This system's figures are rendered directly from EPA SDWIS data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.