PlainWater

Community Water System · PWS MT0000189

Coram County Water and Sewer District

Coram, Montana 59937 - drinking water served from groundwater sources to 450 people, tracked in EPA SDWIS and UCMR5.

450
People served
46
EPA violations
23
Health-based
Untested
UCMR5 result

The verdict

EPA records 46 drinking-water violations at Coram County Water and Sewer District, 50% of them health-based - below the Montana per-system average.

46
Total EPA violations on record
50%
Health-based (MCL / treatment failure)
450
People served by this system
N/A
PFAS compounds detected (UCMR5)

Water Quality Snapshot: Coram County Water and Sewer District

Coram County Water and Sewer District is a local-owned community water system that delivers drinking water to 450 residents in Coram, Montana (Flathead County) through 152 service connections. Its water is drawn from groundwater sources. EPA's Safe Drinking Water Information System records 46 total violations for this system , of which 23 (50%) are health-based, meaning a contaminant exceeded an EPA Maximum Contaminant Level or a required treatment technique failed. A further 18 monitoring and reporting violations are on file. The most recent violation on record dates to 2025.

The most frequently cited contaminant at this system is Coliform (TCR), recorded in 23 violations (MCL, health-based). This system has not yet been sampled under EPA's UCMR5 PFAS monitoring program, so no PFAS detection data is available here.

Across Montana, EPA tracks 2,263 public water systems serving 1,112,267 people, with 297,270 cumulative violations and 25,922 health-based violations on record. About 95% of systems in the state carry at least one violation, and state-wide the average per system is 131.4 violations. Statewide, 28 of 45 UCMR5-tested systems have reported PFAS detections (62.2%).

Coram County Water and Sewer District's 46 violations sit below the Montana average.

All figures above are sourced directly from EPA SDWIS and UCMR5 public data releases and are updated as EPA publishes new reporting cycles.

Population Served
450
Total Violations
46
Health-Based Violations
23
Water Source
Groundwater

System Details

System Type
Community
Owner Type
Local
Connections
152
County
Flathead
School/Daycare
No
MCL Violations
23
Monitoring Violations
18
Treatment Tech Violations
0

Violation History

Contaminant violations recorded by EPA.

Contaminant Category Count Latest
Coliform (TCR) MCL 23 2010
Consumer Confidence Rule Other 5 2025
Benzo(a)pyrene MR 1 1996
OXAMYL MR 1 1996
Total Polychlorinated Biphenyls (PCB) MR 1 1996
Heptachlor MR 1 1996
Aldicarb MR 1 1996
LASSO MR 1 1996
Toxaphene MR 1 1996
BHC-GAMMA MR 1 1996
Endrin MR 1 1996
Simazine MR 1 1996
Aldicarb sulfone MR 1 1996
Methoxychlor MR 1 1996
Di(2-ethylhexyl) adipate MR 1 1996
Carbofuran MR 1 1996
Aldicarb sulfoxide MR 1 1996
Atrazine MR 1 1996
Heptachlor epoxide MR 1 1996
Chlordane MR 1 1996

Verify This Water System

The figures above are aggregated from EPA's public databases. To verify the underlying records, or to file a complaint, request a Consumer Confidence Report, or check current monitoring status, go directly to the federal and state regulators that enforce the Safe Drinking Water Act for Coram County Water and Sewer District.

Federal Source of Truth

EPA SDWIS, Federal Reports

EPA's Safe Drinking Water Information System (SDWIS) holds the federal compliance record for every regulated public water system. Open the system-level report by PWS ID:

View PWS ID MT0000189 on SDWIS

Source: EPA SDWIS Federal Reports Search

State Regulator

Montana Drinking Water Authority

Montana's primacy agency administers the Safe Drinking Water Act locally. Search EPA SDWIS for the current state contact, or use the state's public health or environment department portal.

Find MT regulator via EPA SDWIS

Violation Timeline

Each row links to the EPA SDWIS public record for verification. Cross-reference the contaminant code on EPA's federal report to see violation dates, return-to-compliance status, and enforcement actions.

Year (latest) Contaminant Category Count EPA Record
2025 Consumer Confidence Rule Other 5 SDWIS / MT0000189 / 7000
2010 Coliform (TCR) MCL 23 SDWIS / MT0000189 / 3100
1996 Benzo(a)pyrene MR 1 SDWIS / MT0000189 / 2306
1996 OXAMYL MR 1 SDWIS / MT0000189 / 2036
1996 Total Polychlorinated Biphenyls (PCB) MR 1 SDWIS / MT0000189 / 2383
1996 Heptachlor MR 1 SDWIS / MT0000189 / 2065
1996 Aldicarb MR 1 SDWIS / MT0000189 / 2047
1996 LASSO MR 1 SDWIS / MT0000189 / 2051
1996 Toxaphene MR 1 SDWIS / MT0000189 / 2020
1996 BHC-GAMMA MR 1 SDWIS / MT0000189 / 2010
1996 Endrin MR 1 SDWIS / MT0000189 / 2005
1996 Simazine MR 1 SDWIS / MT0000189 / 2037
1996 Aldicarb sulfone MR 1 SDWIS / MT0000189 / 2044
1996 Methoxychlor MR 1 SDWIS / MT0000189 / 2015
1996 Di(2-ethylhexyl) adipate MR 1 SDWIS / MT0000189 / 2035

How Coram County Water and Sewer District Compares

Cross-reference this system's record against state averages and the federal MCL framework for context.

Metric Coram County Water and Sewer District Montana avg Federal benchmark
Total violations 46 131.4 SDWA compliance, any non-zero count is a recorded breach
Health-based violations 23 11.5 Indicates a contaminant exceeded a federal MCL
PFAS detection None 62.2% EPA final rule (2024): PFOA/PFOS MCL = 4.0 ppt
Population served 450 492 Sizing context for compliance burden

Sources: EPA SDWIS and EPA National Primary Drinking Water Regulations (40 CFR Part 141). State averages computed across 2,263 regulated public water systems in Montana.

Federal MCL reference, Safe Drinking Water Act thresholds
Contaminant Federal MCL / Action Level Note
Lead 0 mg/L (Action Level: 0.015 mg/L) Lead and Copper Rule treatment technique
Arsenic 0.010 mg/L (10 ppb) Health-based MCL since 2006
Total Coliform Treatment technique (RTCR) Indicator organism, monitoring trigger
PFOA / PFOS (PFAS) 4.0 ppt each (final 2024 rule) Compliance deadline 2029 (EPA proposed extending to 2031, not yet final as of May 2026)
Nitrate (as N) 10 mg/L Acute health risk for infants

Frequently Asked Questions

Is Coram County Water and Sewer District water safe to drink?
Coram County Water and Sewer District (PWS ID: MT0000189) has 46 recorded violations in the EPA SDWIS database. No PFAS contamination was detected in UCMR5 testing. This system serves 450 people using Groundwater sources.
How many people does Coram County Water and Sewer District serve?
Coram County Water and Sewer District serves 450 people in Coram, Montana. It is a Local-owned system using Groundwater water sources with 152 service connections.
What type of violations does Coram County Water and Sewer District have?
Coram County Water and Sewer District has 46 total violations: 23 health-based violations (MCL exceedances or treatment failures), 18 monitoring/reporting violations, and 0 treatment technique violations. Health-based violations indicate contaminant levels exceeded EPA safe limits.
Has PFAS been detected in Coram County Water and Sewer District water?
No PFAS testing data is available for Coram County Water and Sewer District under the EPA's UCMR5 monitoring program.
What water source does Coram County Water and Sewer District use?
Coram County Water and Sewer District uses Groundwater as its primary water source. It is classified as a Community Water System (CWS), serving residential populations year-round.
Where does this data come from?
All data comes from the EPA Safe Drinking Water Information System (SDWIS) and the UCMR5 PFAS monitoring program. SDWIS tracks compliance for all public water systems regulated under the Safe Drinking Water Act.
Data Sources: EPA Safe Drinking Water Information System (SDWIS), Q4 2025. This data is provided for informational purposes only.
Data sourced from EPA SDWIS and UCMR5 PFAS monitoring data. See our methodology for details. Retrieved and formatted by PlainWater Editorial

Every figure on PlainWater is rendered directly from EPA SDWIS drinking-water data, no number is typed in by an editor. This system's figures are rendered directly from EPA SDWIS data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.