PlainWater

Opole Water System

PWS ID: MN5730644 · Holdingford, Minnesota 56340

Opole Water System serves 35 people in Holdingford, Minnesota using Groundwater water sources. It has 14 recorded EPA violations, including 14 health-based violations. No PFAS contamination was detected in UCMR5 testing.

Water Quality Snapshot: Opole Water System

Opole Water System is a private-owned transient non-community water system that delivers drinking water to 35 residents in Holdingford, Minnesota (Stearns County) through 14 service connections. Its water is drawn from groundwater sources. EPA's Safe Drinking Water Information System records 14 total violations for this system , of which 14 (100%) are health-based — meaning a contaminant exceeded an EPA Maximum Contaminant Level or a required treatment technique failed. The most recent violation on record dates to 2002.

The most frequently cited contaminant at this system is Coliform (TCR), recorded in 14 violations (MCL, health-based). This system has not yet been sampled under EPA's UCMR5 PFAS monitoring program, so no PFAS detection data is available here.

Across Minnesota, EPA tracks 6,557 public water systems serving 5,239,398 people, with 59,895 cumulative violations and 36,496 health-based violations on record. About 52% of systems in the state carry at least one violation, and state-wide the average per system is 9.1 violations. Opole Water System's 14 violations sit above the Minnesota average. Statewide, 149 of 196 UCMR5-tested systems have reported PFAS detections (76%). All figures above are sourced directly from EPA SDWIS and UCMR5 public data releases and are updated as EPA publishes new reporting cycles.

Population Served
35
Total Violations
14
Health-Based Violations
14
Water Source
Groundwater

System Details

System Type
Transient Non-Community
Owner Type
Private
Connections
14
County
Stearns
School/Daycare
No
MCL Violations
14
Monitoring Violations
0
Treatment Tech Violations
0

Violation History

Contaminant violations recorded by EPA.

Contaminant Category Count Latest
Coliform (TCR) MCL 14 2002

Verify This Water System

The figures above are aggregated from EPA's public databases. To verify the underlying records — or to file a complaint, request a Consumer Confidence Report, or check current monitoring status — go directly to the federal and state regulators that enforce the Safe Drinking Water Act for Opole Water System.

Federal Source of Truth

EPA SDWIS — Federal Reports

EPA's Safe Drinking Water Information System (SDWIS) holds the federal compliance record for every regulated public water system. Open the system-level report by PWS ID:

View PWS ID MN5730644 on SDWIS

Source: EPA SDWIS Federal Reports Search

State Regulator

Minnesota Drinking Water Authority

Minnesota's primacy agency administers the Safe Drinking Water Act locally. Search EPA SDWIS for the current state contact, or use the state's public health or environment department portal.

Find MN regulator via EPA SDWIS

Violation Timeline

Each row links to the EPA SDWIS public record for verification. Cross-reference the contaminant code on EPA's federal report to see violation dates, return-to-compliance status, and enforcement actions.

Year (latest) Contaminant Category Count EPA Record
2002 Coliform (TCR) MCL 14 SDWIS / MN5730644 / 3100

How Opole Water System Compares

Cross-reference this system's record against state averages and the federal MCL framework for context.

Metric Opole Water System Minnesota avg Federal benchmark
Total violations 14 9.1 SDWA compliance — any non-zero count is a recorded breach
Health-based violations 14 5.6 Indicates a contaminant exceeded a federal MCL
PFAS detection None 76% EPA final rule (2024): PFOA/PFOS MCL = 4.0 ppt
Population served 35 799 Sizing context for compliance burden

Sources: EPA SDWIS and EPA National Primary Drinking Water Regulations (40 CFR Part 141). State averages computed across 6,557 regulated public water systems in Minnesota.

Federal MCL reference — Safe Drinking Water Act thresholds
Contaminant Federal MCL / Action Level Note
Lead 0 mg/L (Action Level: 0.015 mg/L) Lead and Copper Rule treatment technique
Arsenic 0.010 mg/L (10 ppb) Health-based MCL since 2006
Total Coliform Treatment technique (RTCR) Indicator organism, monitoring trigger
PFOA / PFOS (PFAS) 4.0 ppt each (final 2024 rule) Compliance deadline 2029
Nitrate (as N) 10 mg/L Acute health risk for infants

Frequently Asked Questions

Is Opole Water System water safe to drink?
Opole Water System (PWS ID: MN5730644) has 14 recorded violations in the EPA SDWIS database. No PFAS contamination was detected in UCMR5 testing. This system serves 35 people using Groundwater sources.
How many people does Opole Water System serve?
Opole Water System serves 35 people in Holdingford, Minnesota. It is a Private-owned system using Groundwater water sources with 14 service connections.
What type of violations does Opole Water System have?
Opole Water System has 14 total violations: 14 health-based violations (MCL exceedances or treatment failures), 0 monitoring/reporting violations, and 0 treatment technique violations. Health-based violations indicate contaminant levels exceeded EPA safe limits.
Has PFAS been detected in Opole Water System water?
No PFAS testing data is available for Opole Water System under the EPA's UCMR5 monitoring program.
What water source does Opole Water System use?
Opole Water System uses Groundwater as its primary water source. It is classified as a Transient Non-Community Water System, serving transient populations.
Where does this data come from?
All data comes from the EPA Safe Drinking Water Information System (SDWIS) and the UCMR5 PFAS monitoring program. SDWIS tracks compliance for all public water systems regulated under the Safe Drinking Water Act.

Explore PlainWater

Data Sources: EPA Safe Drinking Water Information System (SDWIS), Q4 2025. This data is provided for informational purposes only.

Related

Data sourced from $official public datasets. See our methodology for details. Retrieved and formatted by PlainWater Editorial