PlainWater

Appliance Solutions

PWS ID: MN5020315 · Ham Lake, Minnesota 55304

Appliance Solutions serves 25 people in Ham Lake, Minnesota using Groundwater water sources. It has 9 recorded EPA violations, including 9 health-based violations. No PFAS contamination was detected in UCMR5 testing.

Water Quality Snapshot: Appliance Solutions

Appliance Solutions is a private-owned transient non-community water system that delivers drinking water to 25 residents in Ham Lake, Minnesota (Anoka County) through 2 service connections. Its water is drawn from groundwater sources. EPA's Safe Drinking Water Information System records 9 total violations for this system , of which 9 (100%) are health-based — meaning a contaminant exceeded an EPA Maximum Contaminant Level or a required treatment technique failed. The most recent violation on record dates to 1992.

The most frequently cited contaminant at this system is Coliform (TCR), recorded in 9 violations (MCL, health-based). This system has not yet been sampled under EPA's UCMR5 PFAS monitoring program, so no PFAS detection data is available here.

Across Minnesota, EPA tracks 6,557 public water systems serving 5,239,398 people, with 59,895 cumulative violations and 36,496 health-based violations on record. About 52% of systems in the state carry at least one violation, and state-wide the average per system is 9.1 violations. Appliance Solutions's 9 violations sit below the Minnesota average. Statewide, 149 of 196 UCMR5-tested systems have reported PFAS detections (76%). All figures above are sourced directly from EPA SDWIS and UCMR5 public data releases and are updated as EPA publishes new reporting cycles.

Population Served
25
Total Violations
9
Health-Based Violations
9
Water Source
Groundwater

System Details

System Type
Transient Non-Community
Owner Type
Private
Connections
2
County
Anoka
School/Daycare
No
MCL Violations
9
Monitoring Violations
0
Treatment Tech Violations
0

Violation History

Contaminant violations recorded by EPA.

Contaminant Category Count Latest
Coliform (TCR) MCL 9 1992

Verify This Water System

The figures above are aggregated from EPA's public databases. To verify the underlying records — or to file a complaint, request a Consumer Confidence Report, or check current monitoring status — go directly to the federal and state regulators that enforce the Safe Drinking Water Act for Appliance Solutions.

Federal Source of Truth

EPA SDWIS — Federal Reports

EPA's Safe Drinking Water Information System (SDWIS) holds the federal compliance record for every regulated public water system. Open the system-level report by PWS ID:

View PWS ID MN5020315 on SDWIS

Source: EPA SDWIS Federal Reports Search

State Regulator

Minnesota Drinking Water Authority

Minnesota's primacy agency administers the Safe Drinking Water Act locally. Search EPA SDWIS for the current state contact, or use the state's public health or environment department portal.

Find MN regulator via EPA SDWIS

Violation Timeline

Each row links to the EPA SDWIS public record for verification. Cross-reference the contaminant code on EPA's federal report to see violation dates, return-to-compliance status, and enforcement actions.

Year (latest) Contaminant Category Count EPA Record
1992 Coliform (TCR) MCL 9 SDWIS / MN5020315 / 3100

How Appliance Solutions Compares

Cross-reference this system's record against state averages and the federal MCL framework for context.

Metric Appliance Solutions Minnesota avg Federal benchmark
Total violations 9 9.1 SDWA compliance — any non-zero count is a recorded breach
Health-based violations 9 5.6 Indicates a contaminant exceeded a federal MCL
PFAS detection None 76% EPA final rule (2024): PFOA/PFOS MCL = 4.0 ppt
Population served 25 799 Sizing context for compliance burden

Sources: EPA SDWIS and EPA National Primary Drinking Water Regulations (40 CFR Part 141). State averages computed across 6,557 regulated public water systems in Minnesota.

Federal MCL reference — Safe Drinking Water Act thresholds
Contaminant Federal MCL / Action Level Note
Lead 0 mg/L (Action Level: 0.015 mg/L) Lead and Copper Rule treatment technique
Arsenic 0.010 mg/L (10 ppb) Health-based MCL since 2006
Total Coliform Treatment technique (RTCR) Indicator organism, monitoring trigger
PFOA / PFOS (PFAS) 4.0 ppt each (final 2024 rule) Compliance deadline 2029
Nitrate (as N) 10 mg/L Acute health risk for infants

Frequently Asked Questions

Is Appliance Solutions water safe to drink?
Appliance Solutions (PWS ID: MN5020315) has 9 recorded violations in the EPA SDWIS database. No PFAS contamination was detected in UCMR5 testing. This system serves 25 people using Groundwater sources.
How many people does Appliance Solutions serve?
Appliance Solutions serves 25 people in Ham Lake, Minnesota. It is a Private-owned system using Groundwater water sources with 2 service connections.
What type of violations does Appliance Solutions have?
Appliance Solutions has 9 total violations: 9 health-based violations (MCL exceedances or treatment failures), 0 monitoring/reporting violations, and 0 treatment technique violations. Health-based violations indicate contaminant levels exceeded EPA safe limits.
Has PFAS been detected in Appliance Solutions water?
No PFAS testing data is available for Appliance Solutions under the EPA's UCMR5 monitoring program.
What water source does Appliance Solutions use?
Appliance Solutions uses Groundwater as its primary water source. It is classified as a Transient Non-Community Water System, serving transient populations.
Where does this data come from?
All data comes from the EPA Safe Drinking Water Information System (SDWIS) and the UCMR5 PFAS monitoring program. SDWIS tracks compliance for all public water systems regulated under the Safe Drinking Water Act.

Explore PlainWater

Data Sources: EPA Safe Drinking Water Information System (SDWIS), Q4 2025. This data is provided for informational purposes only.

Related

Data sourced from $official public datasets. See our methodology for details. Retrieved and formatted by PlainWater Editorial