PlainWater

Revere

PWS ID: MN1640010 · Revere, Minnesota 56166-0066

Revere serves 95 people in Revere, Minnesota using Groundwater water sources. It has 24 recorded EPA violations, including 0 health-based violations. No PFAS contamination was detected in UCMR5 testing.

Water Quality Snapshot: Revere

Revere is a local-owned community water system that delivers drinking water to 95 residents in Revere, Minnesota (Redwood County) through 41 service connections. Its water is drawn from groundwater sources. EPA's Safe Drinking Water Information System records 24 total violations for this system , of which 0 (0%) are health-based — meaning a contaminant exceeded an EPA Maximum Contaminant Level or a required treatment technique failed. A further 19 monitoring and reporting violations are on file. The most recent violation on record dates to 2016.

The most frequently cited contaminant at this system is Lead and Copper Rule, recorded in 12 violations (MR). This system has not yet been sampled under EPA's UCMR5 PFAS monitoring program, so no PFAS detection data is available here.

Across Minnesota, EPA tracks 6,557 public water systems serving 5,239,398 people, with 59,895 cumulative violations and 36,496 health-based violations on record. About 52% of systems in the state carry at least one violation, and state-wide the average per system is 9.1 violations. Revere's 24 violations sit above the Minnesota average. Statewide, 149 of 196 UCMR5-tested systems have reported PFAS detections (76%). All figures above are sourced directly from EPA SDWIS and UCMR5 public data releases and are updated as EPA publishes new reporting cycles.

Population Served
95
Total Violations
24
Health-Based Violations
0
Water Source
Groundwater

System Details

System Type
Community
Owner Type
Local
Connections
41
County
Redwood
School/Daycare
No
MCL Violations
0
Monitoring Violations
19
Treatment Tech Violations
0

Violation History

Contaminant violations recorded by EPA.

Contaminant Category Count Latest
Lead and Copper Rule MR 12 2016
Nitrate MR 4 1994
Coliform (TCR) MR 3 1995

Verify This Water System

The figures above are aggregated from EPA's public databases. To verify the underlying records — or to file a complaint, request a Consumer Confidence Report, or check current monitoring status — go directly to the federal and state regulators that enforce the Safe Drinking Water Act for Revere.

Federal Source of Truth

EPA SDWIS — Federal Reports

EPA's Safe Drinking Water Information System (SDWIS) holds the federal compliance record for every regulated public water system. Open the system-level report by PWS ID:

View PWS ID MN1640010 on SDWIS

Source: EPA SDWIS Federal Reports Search

State Regulator

Minnesota Drinking Water Authority

Minnesota's primacy agency administers the Safe Drinking Water Act locally. Search EPA SDWIS for the current state contact, or use the state's public health or environment department portal.

Find MN regulator via EPA SDWIS

Violation Timeline

Each row links to the EPA SDWIS public record for verification. Cross-reference the contaminant code on EPA's federal report to see violation dates, return-to-compliance status, and enforcement actions.

Year (latest) Contaminant Category Count EPA Record
2016 Lead and Copper Rule MR 12 SDWIS / MN1640010 / 5000
1995 Coliform (TCR) MR 3 SDWIS / MN1640010 / 3100
1994 Nitrate MR 4 SDWIS / MN1640010 / 1040

How Revere Compares

Cross-reference this system's record against state averages and the federal MCL framework for context.

Metric Revere Minnesota avg Federal benchmark
Total violations 24 9.1 SDWA compliance — any non-zero count is a recorded breach
Health-based violations 0 5.6 Indicates a contaminant exceeded a federal MCL
PFAS detection None 76% EPA final rule (2024): PFOA/PFOS MCL = 4.0 ppt
Population served 95 799 Sizing context for compliance burden

Sources: EPA SDWIS and EPA National Primary Drinking Water Regulations (40 CFR Part 141). State averages computed across 6,557 regulated public water systems in Minnesota.

Federal MCL reference — Safe Drinking Water Act thresholds
Contaminant Federal MCL / Action Level Note
Lead 0 mg/L (Action Level: 0.015 mg/L) Lead and Copper Rule treatment technique
Arsenic 0.010 mg/L (10 ppb) Health-based MCL since 2006
Total Coliform Treatment technique (RTCR) Indicator organism, monitoring trigger
PFOA / PFOS (PFAS) 4.0 ppt each (final 2024 rule) Compliance deadline 2029
Nitrate (as N) 10 mg/L Acute health risk for infants

Frequently Asked Questions

Is Revere water safe to drink?
Revere (PWS ID: MN1640010) has 24 recorded violations in the EPA SDWIS database. No PFAS contamination was detected in UCMR5 testing. This system serves 95 people using Groundwater sources.
How many people does Revere serve?
Revere serves 95 people in Revere, Minnesota. It is a Local-owned system using Groundwater water sources with 41 service connections.
What type of violations does Revere have?
Revere has 24 total violations: 0 health-based violations (MCL exceedances or treatment failures), 19 monitoring/reporting violations, and 0 treatment technique violations. Health-based violations indicate contaminant levels exceeded EPA safe limits.
Has PFAS been detected in Revere water?
No PFAS testing data is available for Revere under the EPA's UCMR5 monitoring program.
What water source does Revere use?
Revere uses Groundwater as its primary water source. It is classified as a Community Water System (CWS), serving residential populations year-round.
Where does this data come from?
All data comes from the EPA Safe Drinking Water Information System (SDWIS) and the UCMR5 PFAS monitoring program. SDWIS tracks compliance for all public water systems regulated under the Safe Drinking Water Act.

Explore PlainWater

Data Sources: EPA Safe Drinking Water Information System (SDWIS), Q4 2025. This data is provided for informational purposes only.

Related

Data sourced from $official public datasets. See our methodology for details. Retrieved and formatted by PlainWater Editorial