Columbus
PWS ID: MN1020043 · Columbus, Minnesota 55025
Columbus serves 123 people in Columbus, Minnesota using Groundwater water sources. It has a clean compliance record with no EPA violations recorded. No PFAS contamination was detected in UCMR5 testing.
Water Quality Snapshot: Columbus
Columbus is a local-owned community water system that delivers drinking water to 123 residents in Columbus, Minnesota (Anoka County) through 76 service connections. Its water is drawn from groundwater sources. EPA's Safe Drinking Water Information System records 0 total violations for this system , giving it a clean Safe Drinking Water Act compliance record.
No specific contaminant violations have been recorded in EPA's detailed violation register for this system. This system has not yet been sampled under EPA's UCMR5 PFAS monitoring program, so no PFAS detection data is available here.
Across Minnesota, EPA tracks 6,557 public water systems serving 5,239,398 people, with 59,895 cumulative violations and 36,496 health-based violations on record. About 52% of systems in the state carry at least one violation, and state-wide the average per system is 9.1 violations. Columbus's 0 violations sit below the Minnesota average. Statewide, 149 of 196 UCMR5-tested systems have reported PFAS detections (76%). All figures above are sourced directly from EPA SDWIS and UCMR5 public data releases and are updated as EPA publishes new reporting cycles.
System Details
- System Type
- Community
- Owner Type
- Local
- Connections
- 76
- County
- Anoka
- School/Daycare
- No
- MCL Violations
- 0
- Monitoring Violations
- 0
- Treatment Tech Violations
- 0
Verify This Water System
The figures above are aggregated from EPA's public databases. To verify the underlying records — or to file a complaint, request a Consumer Confidence Report, or check current monitoring status — go directly to the federal and state regulators that enforce the Safe Drinking Water Act for Columbus.
EPA SDWIS — Federal Reports
EPA's Safe Drinking Water Information System (SDWIS) holds the federal compliance record for every regulated public water system. Open the system-level report by PWS ID:
View PWS ID MN1020043 on SDWISSource: EPA SDWIS Federal Reports Search
Minnesota Drinking Water Authority
Minnesota's primacy agency administers the Safe Drinking Water Act locally. Search EPA SDWIS for the current state contact, or use the state's public health or environment department portal.
Find MN regulator via EPA SDWISHow Columbus Compares
Cross-reference this system's record against state averages and the federal MCL framework for context.
| Metric | Columbus | Minnesota avg | Federal benchmark |
|---|---|---|---|
| Total violations | 0 | 9.1 | SDWA compliance — any non-zero count is a recorded breach |
| Health-based violations | 0 | 5.6 | Indicates a contaminant exceeded a federal MCL |
| PFAS detection | None | 76% | EPA final rule (2024): PFOA/PFOS MCL = 4.0 ppt |
| Population served | 123 | 799 | Sizing context for compliance burden |
Sources: EPA SDWIS and EPA National Primary Drinking Water Regulations (40 CFR Part 141). State averages computed across 6,557 regulated public water systems in Minnesota.
Federal MCL reference — Safe Drinking Water Act thresholds ▼
| Contaminant | Federal MCL / Action Level | Note |
|---|---|---|
| Lead | 0 mg/L (Action Level: 0.015 mg/L) | Lead and Copper Rule treatment technique |
| Arsenic | 0.010 mg/L (10 ppb) | Health-based MCL since 2006 |
| Total Coliform | Treatment technique (RTCR) | Indicator organism, monitoring trigger |
| PFOA / PFOS (PFAS) | 4.0 ppt each (final 2024 rule) | Compliance deadline 2029 |
| Nitrate (as N) | 10 mg/L | Acute health risk for infants |
Frequently Asked Questions
Is Columbus water safe to drink? ▼
How many people does Columbus serve? ▼
What type of violations does Columbus have? ▼
Has PFAS been detected in Columbus water? ▼
What water source does Columbus use? ▼
Where does this data come from? ▼
Explore PlainWater
Related Data for Minnesota
Read our methodology — how this data is sourced, computed, and verified.