PlainWater

WALTON WATER WORKS

PWS ID: IN5209010 · WALTON, Indiana 46994-0322

WALTON WATER WORKS serves 1,040 people in WALTON, Indiana using Groundwater water sources. It has 36 recorded EPA violations, including 1 health-based violations. No PFAS contamination was detected in UCMR5 testing.

Water Quality Snapshot: WALTON WATER WORKS

WALTON WATER WORKS is a local-owned community water system that delivers drinking water to 1,040 residents in WALTON, Indiana (Cass County) through 440 service connections. Its water is drawn from groundwater sources. EPA's Safe Drinking Water Information System records 36 total violations for this system , of which 1 (3%) are health-based — meaning a contaminant exceeded an EPA Maximum Contaminant Level or a required treatment technique failed. A further 19 monitoring and reporting violations are on file. The most recent violation on record dates to 2024.

The most frequently cited contaminant at this system is Consumer Confidence Rule, recorded in 10 violations (Other). This system has not yet been sampled under EPA's UCMR5 PFAS monitoring program, so no PFAS detection data is available here.

Across Indiana, EPA tracks 3,967 public water systems serving 5,774,616 people, with 352,710 cumulative violations and 35,932 health-based violations on record. About 96% of systems in the state carry at least one violation, and state-wide the average per system is 88.9 violations. WALTON WATER WORKS's 36 violations sit below the Indiana average. Statewide, 93 of 229 UCMR5-tested systems have reported PFAS detections (40.6%). All figures above are sourced directly from EPA SDWIS and UCMR5 public data releases and are updated as EPA publishes new reporting cycles.

Population Served
1,040
Total Violations
36
Health-Based Violations
1
Water Source
Groundwater

System Details

System Type
Community
Owner Type
Local
Connections
440
County
Cass
School/Daycare
No
MCL Violations
1
Monitoring Violations
19
Treatment Tech Violations
0

Violation History

Contaminant violations recorded by EPA.

Contaminant Category Count Latest
Consumer Confidence Rule Other 10 2024
Nitrate MR 6 2020
Coliform (TCR) MR 6 1997
Revised Total Coliform Rule MON 3 2019
Lead and Copper Rule MR 1 2024
Coliform (TCR) MCL 1 1992
Gross Alpha, Excl. Radon and U MR 1 1980
Total Haloacetic Acids (HAA5) MR 1 2006
TTHM MR 1 2006

Verify This Water System

The figures above are aggregated from EPA's public databases. To verify the underlying records — or to file a complaint, request a Consumer Confidence Report, or check current monitoring status — go directly to the federal and state regulators that enforce the Safe Drinking Water Act for WALTON WATER WORKS.

Federal Source of Truth

EPA SDWIS — Federal Reports

EPA's Safe Drinking Water Information System (SDWIS) holds the federal compliance record for every regulated public water system. Open the system-level report by PWS ID:

View PWS ID IN5209010 on SDWIS

Source: EPA SDWIS Federal Reports Search

State Regulator

Indiana Drinking Water Authority

Indiana Department of Environmental Management — Drinking Water Branch is the primacy agency that licenses and inspects WALTON WATER WORKS under EPA-delegated authority.

Open IN regulator portal

Source: Indiana Department of Environmental Management — Drinking Water Branch

Violation Timeline

Each row links to the EPA SDWIS public record for verification. Cross-reference the contaminant code on EPA's federal report to see violation dates, return-to-compliance status, and enforcement actions.

Year (latest) Contaminant Category Count EPA Record
2024 Consumer Confidence Rule Other 10 SDWIS / IN5209010 / 7000
2024 Lead and Copper Rule MR 1 SDWIS / IN5209010 / 5000
2020 Nitrate MR 6 SDWIS / IN5209010 / 1040
2019 Revised Total Coliform Rule MON 3 SDWIS / IN5209010 / 8000
2006 Total Haloacetic Acids (HAA5) MR 1 SDWIS / IN5209010 / 2456
2006 TTHM MR 1 SDWIS / IN5209010 / 2950
1997 Coliform (TCR) MR 6 SDWIS / IN5209010 / 3100
1992 Coliform (TCR) MCL 1 SDWIS / IN5209010 / 3100
1980 Gross Alpha, Excl. Radon and U MR 1 SDWIS / IN5209010 / 4000

How WALTON WATER WORKS Compares

Cross-reference this system's record against state averages and the federal MCL framework for context.

Metric WALTON WATER WORKS Indiana avg Federal benchmark
Total violations 36 88.9 SDWA compliance — any non-zero count is a recorded breach
Health-based violations 1 9.1 Indicates a contaminant exceeded a federal MCL
PFAS detection None 40.6% EPA final rule (2024): PFOA/PFOS MCL = 4.0 ppt
Population served 1,040 1,456 Sizing context for compliance burden

Sources: EPA SDWIS and EPA National Primary Drinking Water Regulations (40 CFR Part 141). State averages computed across 3,967 regulated public water systems in Indiana.

Federal MCL reference — Safe Drinking Water Act thresholds
Contaminant Federal MCL / Action Level Note
Lead 0 mg/L (Action Level: 0.015 mg/L) Lead and Copper Rule treatment technique
Arsenic 0.010 mg/L (10 ppb) Health-based MCL since 2006
Total Coliform Treatment technique (RTCR) Indicator organism, monitoring trigger
PFOA / PFOS (PFAS) 4.0 ppt each (final 2024 rule) Compliance deadline 2029
Nitrate (as N) 10 mg/L Acute health risk for infants

Frequently Asked Questions

Is WALTON WATER WORKS water safe to drink?
WALTON WATER WORKS (PWS ID: IN5209010) has 36 recorded violations in the EPA SDWIS database. No PFAS contamination was detected in UCMR5 testing. This system serves 1,040 people using Groundwater sources.
How many people does WALTON WATER WORKS serve?
WALTON WATER WORKS serves 1,040 people in WALTON, Indiana. It is a Local-owned system using Groundwater water sources with 440 service connections.
What type of violations does WALTON WATER WORKS have?
WALTON WATER WORKS has 36 total violations: 1 health-based violations (MCL exceedances or treatment failures), 19 monitoring/reporting violations, and 0 treatment technique violations. Health-based violations indicate contaminant levels exceeded EPA safe limits.
Has PFAS been detected in WALTON WATER WORKS water?
No PFAS testing data is available for WALTON WATER WORKS under the EPA's UCMR5 monitoring program.
What water source does WALTON WATER WORKS use?
WALTON WATER WORKS uses Groundwater as its primary water source. It is classified as a Community Water System (CWS), serving residential populations year-round.
Where does this data come from?
All data comes from the EPA Safe Drinking Water Information System (SDWIS) and the UCMR5 PFAS monitoring program. SDWIS tracks compliance for all public water systems regulated under the Safe Drinking Water Act.

Explore PlainWater

Data Sources: EPA Safe Drinking Water Information System (SDWIS), Q4 2025. This data is provided for informational purposes only.

Related

Data sourced from $official public datasets. See our methodology for details. Retrieved and formatted by Kiznis Studio Editorial