PlainWater

Non-Transient Non-Community Water System · PWS IN2790022

Alloy Custom Products, LLC

Lafayette, Indiana 47905 - drinking water served from groundwater sources to 110 people, tracked in EPA SDWIS and UCMR5.

110
People served
21
EPA violations
7
Health-based
Untested
UCMR5 result

The verdict

EPA records 21 drinking-water violations at Alloy Custom Products, LLC, 33% of them health-based - below the Indiana per-system average.

21
Total EPA violations on record
33%
Health-based (MCL / treatment failure)
110
People served by this system
N/A
PFAS compounds detected (UCMR5)

Water Quality Snapshot: Alloy Custom Products, LLC

Alloy Custom Products, LLC is a private-owned non-transient non-community water system that delivers drinking water to 110 residents in Lafayette, Indiana (Tippecanoe County) through 4 service connections. Its water is drawn from groundwater sources. EPA's Safe Drinking Water Information System records 21 total violations for this system , of which 7 (33%) are health-based, meaning a contaminant exceeded an EPA Maximum Contaminant Level or a required treatment technique failed. A further 13 monitoring and reporting violations are on file. The most recent violation on record dates to 2024.

The most frequently cited contaminant at this system is Lead and Copper Rule, recorded in 8 violations (MR). This system has not yet been sampled under EPA's UCMR5 PFAS monitoring program, so no PFAS detection data is available here.

Across Indiana, EPA tracks 3,967 public water systems serving 5,774,616 people, with 352,710 cumulative violations and 35,932 health-based violations on record. About 96% of systems in the state carry at least one violation, and state-wide the average per system is 88.9 violations. Statewide, 93 of 229 UCMR5-tested systems have reported PFAS detections (40.6%).

Alloy Custom Products, LLC's 21 violations sit below the Indiana average.

All figures above are sourced directly from EPA SDWIS and UCMR5 public data releases and are updated as EPA publishes new reporting cycles.

Population Served
110
Total Violations
21
Health-Based Violations
7
Water Source
Groundwater

System Details

System Type
Non-Transient Non-Community
Owner Type
Private
Connections
4
County
Tippecanoe
School/Daycare
No
MCL Violations
0
Monitoring Violations
13
Treatment Tech Violations
7

Violation History

Contaminant violations recorded by EPA.

Contaminant Category Count Latest
Lead and Copper Rule MR 8 2023
Lead and Copper Rule TT 7 2023
Coliform (TCR) MR 5 2012
Revised Total Coliform Rule RPT 1 2024

Verify This Water System

The figures above are aggregated from EPA's public databases. To verify the underlying records, or to file a complaint, request a Consumer Confidence Report, or check current monitoring status, go directly to the federal and state regulators that enforce the Safe Drinking Water Act for Alloy Custom Products, LLC.

Federal Source of Truth

EPA SDWIS, Federal Reports

EPA's Safe Drinking Water Information System (SDWIS) holds the federal compliance record for every regulated public water system. Open the system-level report by PWS ID:

View PWS ID IN2790022 on SDWIS

Source: EPA SDWIS Federal Reports Search

State Regulator

Indiana Drinking Water Authority

Indiana Department of Environmental Management, Drinking Water Branch is the primacy agency that licenses and inspects Alloy Custom Products, LLC under EPA-delegated authority.

Open IN regulator portal

Source: Indiana Department of Environmental Management, Drinking Water Branch

Violation Timeline

Each row links to the EPA SDWIS public record for verification. Cross-reference the contaminant code on EPA's federal report to see violation dates, return-to-compliance status, and enforcement actions.

Year (latest) Contaminant Category Count EPA Record
2024 Revised Total Coliform Rule RPT 1 SDWIS / IN2790022 / 8000
2023 Lead and Copper Rule MR 8 SDWIS / IN2790022 / 5000
2023 Lead and Copper Rule TT 7 SDWIS / IN2790022 / 5000
2012 Coliform (TCR) MR 5 SDWIS / IN2790022 / 3100

How Alloy Custom Products, LLC Compares

Cross-reference this system's record against state averages and the federal MCL framework for context.

Metric Alloy Custom Products, LLC Indiana avg Federal benchmark
Total violations 21 88.9 SDWA compliance, any non-zero count is a recorded breach
Health-based violations 7 9.1 Indicates a contaminant exceeded a federal MCL
PFAS detection None 40.6% EPA final rule (2024): PFOA/PFOS MCL = 4.0 ppt
Population served 110 1,456 Sizing context for compliance burden

Sources: EPA SDWIS and EPA National Primary Drinking Water Regulations (40 CFR Part 141). State averages computed across 3,967 regulated public water systems in Indiana.

Federal MCL reference, Safe Drinking Water Act thresholds
Contaminant Federal MCL / Action Level Note
Lead 0 mg/L (Action Level: 0.015 mg/L) Lead and Copper Rule treatment technique
Arsenic 0.010 mg/L (10 ppb) Health-based MCL since 2006
Total Coliform Treatment technique (RTCR) Indicator organism, monitoring trigger
PFOA / PFOS (PFAS) 4.0 ppt each (final 2024 rule) Compliance deadline 2029 (EPA proposed extending to 2031, not yet final as of May 2026)
Nitrate (as N) 10 mg/L Acute health risk for infants

Frequently Asked Questions

Is Alloy Custom Products, LLC water safe to drink?
Alloy Custom Products, LLC (PWS ID: IN2790022) has 21 recorded violations in the EPA SDWIS database. No PFAS contamination was detected in UCMR5 testing. This system serves 110 people using Groundwater sources.
How many people does Alloy Custom Products, LLC serve?
Alloy Custom Products, LLC serves 110 people in Lafayette, Indiana. It is a Private-owned system using Groundwater water sources with 4 service connections.
What type of violations does Alloy Custom Products, LLC have?
Alloy Custom Products, LLC has 21 total violations: 7 health-based violations (MCL exceedances or treatment failures), 13 monitoring/reporting violations, and 7 treatment technique violations. Health-based violations indicate contaminant levels exceeded EPA safe limits.
Has PFAS been detected in Alloy Custom Products, LLC water?
No PFAS testing data is available for Alloy Custom Products, LLC under the EPA's UCMR5 monitoring program.
What water source does Alloy Custom Products, LLC use?
Alloy Custom Products, LLC uses Groundwater as its primary water source. It is classified as a Non-Transient Non-Community Water System, serving the same people for at least 6 months per year.
Where does this data come from?
All data comes from the EPA Safe Drinking Water Information System (SDWIS) and the UCMR5 PFAS monitoring program. SDWIS tracks compliance for all public water systems regulated under the Safe Drinking Water Act.
Data Sources: EPA Safe Drinking Water Information System (SDWIS), Q4 2025. This data is provided for informational purposes only.
Data sourced from EPA SDWIS and UCMR5 PFAS monitoring data. See our methodology for details. Retrieved and formatted by PlainWater Editorial

Every figure on PlainWater is rendered directly from EPA SDWIS drinking-water data, no number is typed in by an editor. This system's figures are rendered directly from EPA SDWIS data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.