PlainWater

Non-Transient Non-Community Water System · PWS IL3162727

Nucor Rebar Fabrication Midwest

Belvidere, Illinois 61008 - drinking water served from groundwater sources to 40 people, tracked in EPA SDWIS and UCMR5.

40
People served
10
EPA violations
4
Health-based
Untested
UCMR5 result

The verdict

EPA records 10 drinking-water violations at Nucor Rebar Fabrication Midwest, 40% of them health-based - below the Illinois per-system average.

10
Total EPA violations on record
40%
Health-based (MCL / treatment failure)
40
People served by this system
N/A
PFAS compounds detected (UCMR5)

Water Quality Snapshot: Nucor Rebar Fabrication Midwest

Nucor Rebar Fabrication Midwest is a public/private-owned non-transient non-community water system that delivers drinking water to 40 residents in Belvidere, Illinois (Boone County) through 1 service connections. Its water is drawn from groundwater sources. EPA's Safe Drinking Water Information System records 10 total violations for this system , of which 4 (40%) are health-based, meaning a contaminant exceeded an EPA Maximum Contaminant Level or a required treatment technique failed. A further 2 monitoring and reporting violations are on file. The most recent violation on record dates to 2024.

The most frequently cited contaminant at this system is LEAD AND COPPER RULE REVISIONS, recorded in 4 violations (TT, health-based). This system has not yet been sampled under EPA's UCMR5 PFAS monitoring program, so no PFAS detection data is available here.

Across Illinois, EPA tracks 5,117 public water systems serving 12,576,876 people, with 355,322 cumulative violations and 52,932 health-based violations on record. About 81% of systems in the state carry at least one violation, and state-wide the average per system is 69.4 violations. Statewide, 199 of 487 UCMR5-tested systems have reported PFAS detections (40.9%).

Nucor Rebar Fabrication Midwest's 10 violations sit below the Illinois average.

All figures above are sourced directly from EPA SDWIS and UCMR5 public data releases and are updated as EPA publishes new reporting cycles.

Population Served
40
Total Violations
10
Health-Based Violations
4
Water Source
Groundwater

System Details

System Type
Non-Transient Non-Community
Owner Type
Public/Private
Connections
1
County
Boone
School/Daycare
No
MCL Violations
0
Monitoring Violations
2
Treatment Tech Violations
4

Violation History

Contaminant violations recorded by EPA.

Contaminant Category Count Latest
LEAD AND COPPER RULE REVISIONS TT 4 2024
LEAD AND COPPER RULE REVISIONS RPT 4 2024
Lead and Copper Rule MR 2 2021

Verify This Water System

The figures above are aggregated from EPA's public databases. To verify the underlying records, or to file a complaint, request a Consumer Confidence Report, or check current monitoring status, go directly to the federal and state regulators that enforce the Safe Drinking Water Act for Nucor Rebar Fabrication Midwest.

Federal Source of Truth

EPA SDWIS, Federal Reports

EPA's Safe Drinking Water Information System (SDWIS) holds the federal compliance record for every regulated public water system. Open the system-level report by PWS ID:

View PWS ID IL3162727 on SDWIS

Source: EPA SDWIS Federal Reports Search

State Regulator

Illinois Drinking Water Authority

Illinois EPA, Bureau of Water is the primacy agency that licenses and inspects Nucor Rebar Fabrication Midwest under EPA-delegated authority.

Open IL regulator portal

Source: Illinois EPA, Bureau of Water

Violation Timeline

Each row links to the EPA SDWIS public record for verification. Cross-reference the contaminant code on EPA's federal report to see violation dates, return-to-compliance status, and enforcement actions.

Year (latest) Contaminant Category Count EPA Record
2024 LEAD AND COPPER RULE REVISIONS TT 4 SDWIS / IL3162727 / 5200
2024 LEAD AND COPPER RULE REVISIONS RPT 4 SDWIS / IL3162727 / 5200
2021 Lead and Copper Rule MR 2 SDWIS / IL3162727 / 5000

How Nucor Rebar Fabrication Midwest Compares

Cross-reference this system's record against state averages and the federal MCL framework for context.

Metric Nucor Rebar Fabrication Midwest Illinois avg Federal benchmark
Total violations 10 69.4 SDWA compliance, any non-zero count is a recorded breach
Health-based violations 4 10.3 Indicates a contaminant exceeded a federal MCL
PFAS detection None 40.9% EPA final rule (2024): PFOA/PFOS MCL = 4.0 ppt
Population served 40 2,458 Sizing context for compliance burden

Sources: EPA SDWIS and EPA National Primary Drinking Water Regulations (40 CFR Part 141). State averages computed across 5,117 regulated public water systems in Illinois.

Federal MCL reference, Safe Drinking Water Act thresholds
Contaminant Federal MCL / Action Level Note
Lead 0 mg/L (Action Level: 0.015 mg/L) Lead and Copper Rule treatment technique
Arsenic 0.010 mg/L (10 ppb) Health-based MCL since 2006
Total Coliform Treatment technique (RTCR) Indicator organism, monitoring trigger
PFOA / PFOS (PFAS) 4.0 ppt each (final 2024 rule) Compliance deadline 2029 (EPA proposed extending to 2031, not yet final as of May 2026)
Nitrate (as N) 10 mg/L Acute health risk for infants

Frequently Asked Questions

Is Nucor Rebar Fabrication Midwest water safe to drink?
Nucor Rebar Fabrication Midwest (PWS ID: IL3162727) has 10 recorded violations in the EPA SDWIS database. No PFAS contamination was detected in UCMR5 testing. This system serves 40 people using Groundwater sources.
How many people does Nucor Rebar Fabrication Midwest serve?
Nucor Rebar Fabrication Midwest serves 40 people in Belvidere, Illinois. It is a Public/Private-owned system using Groundwater water sources with 1 service connections.
What type of violations does Nucor Rebar Fabrication Midwest have?
Nucor Rebar Fabrication Midwest has 10 total violations: 4 health-based violations (MCL exceedances or treatment failures), 2 monitoring/reporting violations, and 4 treatment technique violations. Health-based violations indicate contaminant levels exceeded EPA safe limits.
Has PFAS been detected in Nucor Rebar Fabrication Midwest water?
No PFAS testing data is available for Nucor Rebar Fabrication Midwest under the EPA's UCMR5 monitoring program.
What water source does Nucor Rebar Fabrication Midwest use?
Nucor Rebar Fabrication Midwest uses Groundwater as its primary water source. It is classified as a Non-Transient Non-Community Water System, serving the same people for at least 6 months per year.
Where does this data come from?
All data comes from the EPA Safe Drinking Water Information System (SDWIS) and the UCMR5 PFAS monitoring program. SDWIS tracks compliance for all public water systems regulated under the Safe Drinking Water Act.
Data Sources: EPA Safe Drinking Water Information System (SDWIS), Q4 2025. This data is provided for informational purposes only.
Data sourced from EPA SDWIS and UCMR5 PFAS monitoring data. See our methodology for details. Retrieved and formatted by PlainWater Editorial

Every figure on PlainWater is rendered directly from EPA SDWIS drinking-water data, no number is typed in by an editor. This system's figures are rendered directly from EPA SDWIS data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.