PlainWater
StatesIowa

Transient Non-Community Water System · PWS IA9905302

Wilson Subdivision Well #9

Clarion, Iowa 50525 - drinking water served from groundwater sources to 63 people, tracked in EPA SDWIS and UCMR5.

63
People served
48
EPA violations
10
Health-based
Untested
UCMR5 result

The verdict

EPA records 48 drinking-water violations at Wilson Subdivision Well #9, 21% of them health-based - below the Iowa per-system average.

48
Total EPA violations on record
21%
Health-based (MCL / treatment failure)
63
People served by this system
N/A
PFAS compounds detected (UCMR5)

Water Quality Snapshot: Wilson Subdivision Well #9

Wilson Subdivision Well #9 is a private-owned transient non-community water system that delivers drinking water to 63 residents in Clarion, Iowa (Wright County) through 25 service connections. Its water is drawn from groundwater sources. EPA's Safe Drinking Water Information System records 48 total violations for this system , of which 10 (21%) are health-based, meaning a contaminant exceeded an EPA Maximum Contaminant Level or a required treatment technique failed. A further 25 monitoring and reporting violations are on file. The most recent violation on record dates to 2005.

The most frequently cited contaminant at this system is Coliform (TCR), recorded in 13 violations (MR). This system has not yet been sampled under EPA's UCMR5 PFAS monitoring program, so no PFAS detection data is available here.

Across Iowa, EPA tracks 1,795 public water systems serving 3,114,444 people, with 138,271 cumulative violations and 27,946 health-based violations on record. About 95% of systems in the state carry at least one violation, and state-wide the average per system is 77 violations. Statewide, 32 of 152 UCMR5-tested systems have reported PFAS detections (21.1%).

Wilson Subdivision Well #9's 48 violations sit below the Iowa average.

All figures above are sourced directly from EPA SDWIS and UCMR5 public data releases and are updated as EPA publishes new reporting cycles.

Population Served
63
Total Violations
48
Health-Based Violations
10
Water Source
Groundwater

System Details

System Type
Transient Non-Community
Owner Type
Private
Connections
25
County
Wright
School/Daycare
No
MCL Violations
10
Monitoring Violations
25
Treatment Tech Violations
0

Violation History

Contaminant violations recorded by EPA.

Contaminant Category Count Latest
Coliform (TCR) MR 13 2002
Nitrate MR 12 1994
Coliform (TCR) MCL 10 2005

Verify This Water System

The figures above are aggregated from EPA's public databases. To verify the underlying records, or to file a complaint, request a Consumer Confidence Report, or check current monitoring status, go directly to the federal and state regulators that enforce the Safe Drinking Water Act for Wilson Subdivision Well #9.

Federal Source of Truth

EPA SDWIS, Federal Reports

EPA's Safe Drinking Water Information System (SDWIS) holds the federal compliance record for every regulated public water system. Open the system-level report by PWS ID:

View PWS ID IA9905302 on SDWIS

Source: EPA SDWIS Federal Reports Search

State Regulator

Iowa Drinking Water Authority

Iowa's primacy agency administers the Safe Drinking Water Act locally. Search EPA SDWIS for the current state contact, or use the state's public health or environment department portal.

Find IA regulator via EPA SDWIS

Violation Timeline

Each row links to the EPA SDWIS public record for verification. Cross-reference the contaminant code on EPA's federal report to see violation dates, return-to-compliance status, and enforcement actions.

Year (latest) Contaminant Category Count EPA Record
2005 Coliform (TCR) MCL 10 SDWIS / IA9905302 / 3100
2002 Coliform (TCR) MR 13 SDWIS / IA9905302 / 3100
1994 Nitrate MR 12 SDWIS / IA9905302 / 1040

How Wilson Subdivision Well #9 Compares

Cross-reference this system's record against state averages and the federal MCL framework for context.

Metric Wilson Subdivision Well #9 Iowa avg Federal benchmark
Total violations 48 77 SDWA compliance, any non-zero count is a recorded breach
Health-based violations 10 15.6 Indicates a contaminant exceeded a federal MCL
PFAS detection None 21.1% EPA final rule (2024): PFOA/PFOS MCL = 4.0 ppt
Population served 63 1,735 Sizing context for compliance burden

Sources: EPA SDWIS and EPA National Primary Drinking Water Regulations (40 CFR Part 141). State averages computed across 1,795 regulated public water systems in Iowa.

Federal MCL reference, Safe Drinking Water Act thresholds
Contaminant Federal MCL / Action Level Note
Lead 0 mg/L (Action Level: 0.015 mg/L) Lead and Copper Rule treatment technique
Arsenic 0.010 mg/L (10 ppb) Health-based MCL since 2006
Total Coliform Treatment technique (RTCR) Indicator organism, monitoring trigger
PFOA / PFOS (PFAS) 4.0 ppt each (final 2024 rule) Compliance deadline 2029 (EPA proposed extending to 2031, not yet final as of May 2026)
Nitrate (as N) 10 mg/L Acute health risk for infants

Frequently Asked Questions

Is Wilson Subdivision Well #9 water safe to drink?
Wilson Subdivision Well #9 (PWS ID: IA9905302) has 48 recorded violations in the EPA SDWIS database. No PFAS contamination was detected in UCMR5 testing. This system serves 63 people using Groundwater sources.
How many people does Wilson Subdivision Well #9 serve?
Wilson Subdivision Well #9 serves 63 people in Clarion, Iowa. It is a Private-owned system using Groundwater water sources with 25 service connections.
What type of violations does Wilson Subdivision Well #9 have?
Wilson Subdivision Well #9 has 48 total violations: 10 health-based violations (MCL exceedances or treatment failures), 25 monitoring/reporting violations, and 0 treatment technique violations. Health-based violations indicate contaminant levels exceeded EPA safe limits.
Has PFAS been detected in Wilson Subdivision Well #9 water?
No PFAS testing data is available for Wilson Subdivision Well #9 under the EPA's UCMR5 monitoring program.
What water source does Wilson Subdivision Well #9 use?
Wilson Subdivision Well #9 uses Groundwater as its primary water source. It is classified as a Transient Non-Community Water System, serving transient populations.
Where does this data come from?
All data comes from the EPA Safe Drinking Water Information System (SDWIS) and the UCMR5 PFAS monitoring program. SDWIS tracks compliance for all public water systems regulated under the Safe Drinking Water Act.
Data Sources: EPA Safe Drinking Water Information System (SDWIS), Q4 2025. This data is provided for informational purposes only.
Data sourced from EPA SDWIS and UCMR5 PFAS monitoring data. See our methodology for details. Retrieved and formatted by PlainWater Editorial

Every figure on PlainWater is rendered directly from EPA SDWIS drinking-water data, no number is typed in by an editor. This system's figures are rendered directly from EPA SDWIS data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.