PlainWater
StatesIowa

MELVIN WATERWORKS

PWS ID: IA7234069 · SIBLEY, Iowa 51249

MELVIN WATERWORKS serves 202 people in SIBLEY, Iowa using Groundwater water sources. It has 18 recorded EPA violations, including 0 health-based violations. No PFAS contamination was detected in UCMR5 testing.

Water Quality Snapshot: MELVIN WATERWORKS

MELVIN WATERWORKS is a local-owned community water system that delivers drinking water to 202 residents in SIBLEY, Iowa (Osceola County) through 140 service connections. Its water is drawn from groundwater sources. EPA's Safe Drinking Water Information System records 18 total violations for this system , of which 0 (0%) are health-based — meaning a contaminant exceeded an EPA Maximum Contaminant Level or a required treatment technique failed.

No specific contaminant violations have been recorded in EPA's detailed violation register for this system. This system has not yet been sampled under EPA's UCMR5 PFAS monitoring program, so no PFAS detection data is available here.

Across Iowa, EPA tracks 1,795 public water systems serving 3,114,444 people, with 138,271 cumulative violations and 27,946 health-based violations on record. About 95% of systems in the state carry at least one violation, and state-wide the average per system is 77 violations. MELVIN WATERWORKS's 18 violations sit below the Iowa average. Statewide, 127 of 152 UCMR5-tested systems have reported PFAS detections (83.6%). All figures above are sourced directly from EPA SDWIS and UCMR5 public data releases and are updated as EPA publishes new reporting cycles.

Population Served
202
Total Violations
18
Health-Based Violations
0
Water Source
Groundwater

System Details

System Type
Community
Owner Type
Local
Connections
140
County
Osceola
School/Daycare
No
MCL Violations
0
Monitoring Violations
0
Treatment Tech Violations
0

Verify This Water System

The figures above are aggregated from EPA's public databases. To verify the underlying records — or to file a complaint, request a Consumer Confidence Report, or check current monitoring status — go directly to the federal and state regulators that enforce the Safe Drinking Water Act for MELVIN WATERWORKS.

Federal Source of Truth

EPA SDWIS — Federal Reports

EPA's Safe Drinking Water Information System (SDWIS) holds the federal compliance record for every regulated public water system. Open the system-level report by PWS ID:

View PWS ID IA7234069 on SDWIS

Source: EPA SDWIS Federal Reports Search

State Regulator

Iowa Drinking Water Authority

Iowa's primacy agency administers the Safe Drinking Water Act locally. Search EPA SDWIS for the current state contact, or use the state's public health or environment department portal.

Find IA regulator via EPA SDWIS

How MELVIN WATERWORKS Compares

Cross-reference this system's record against state averages and the federal MCL framework for context.

Metric MELVIN WATERWORKS Iowa avg Federal benchmark
Total violations 18 77 SDWA compliance — any non-zero count is a recorded breach
Health-based violations 0 15.6 Indicates a contaminant exceeded a federal MCL
PFAS detection None 83.6% EPA final rule (2024): PFOA/PFOS MCL = 4.0 ppt
Population served 202 1,735 Sizing context for compliance burden

Sources: EPA SDWIS and EPA National Primary Drinking Water Regulations (40 CFR Part 141). State averages computed across 1,795 regulated public water systems in Iowa.

Federal MCL reference — Safe Drinking Water Act thresholds
Contaminant Federal MCL / Action Level Note
Lead 0 mg/L (Action Level: 0.015 mg/L) Lead and Copper Rule treatment technique
Arsenic 0.010 mg/L (10 ppb) Health-based MCL since 2006
Total Coliform Treatment technique (RTCR) Indicator organism, monitoring trigger
PFOA / PFOS (PFAS) 4.0 ppt each (final 2024 rule) Compliance deadline 2029
Nitrate (as N) 10 mg/L Acute health risk for infants

Frequently Asked Questions

Is MELVIN WATERWORKS water safe to drink?
MELVIN WATERWORKS (PWS ID: IA7234069) has 18 recorded violations in the EPA SDWIS database. No PFAS contamination was detected in UCMR5 testing. This system serves 202 people using Groundwater sources.
How many people does MELVIN WATERWORKS serve?
MELVIN WATERWORKS serves 202 people in SIBLEY, Iowa. It is a Local-owned system using Groundwater water sources with 140 service connections.
What type of violations does MELVIN WATERWORKS have?
MELVIN WATERWORKS has 18 total violations: 0 health-based violations (MCL exceedances or treatment failures), 0 monitoring/reporting violations, and 0 treatment technique violations. Health-based violations indicate contaminant levels exceeded EPA safe limits.
Has PFAS been detected in MELVIN WATERWORKS water?
No PFAS testing data is available for MELVIN WATERWORKS under the EPA's UCMR5 monitoring program.
What water source does MELVIN WATERWORKS use?
MELVIN WATERWORKS uses Groundwater as its primary water source. It is classified as a Community Water System (CWS), serving residential populations year-round.
Where does this data come from?
All data comes from the EPA Safe Drinking Water Information System (SDWIS) and the UCMR5 PFAS monitoring program. SDWIS tracks compliance for all public water systems regulated under the Safe Drinking Water Act.

Explore PlainWater

Data Sources: EPA Safe Drinking Water Information System (SDWIS), Q4 2025. This data is provided for informational purposes only.

Related

Data sourced from $official public datasets. See our methodology for details. Retrieved and formatted by PlainWater Editorial