PlainWater
StatesIowa

BREDA WATER SUPPLY

PWS ID: IA1409041 · BREDA, Iowa 51436-0129

BREDA WATER SUPPLY serves 500 people in BREDA, Iowa using Groundwater water sources. It has 118 recorded EPA violations, including 0 health-based violations. No PFAS contamination was detected in UCMR5 testing.

Water Quality Snapshot: BREDA WATER SUPPLY

BREDA WATER SUPPLY is a local-owned community water system that delivers drinking water to 500 residents in BREDA, Iowa (Carroll County) through 267 service connections. Its water is drawn from groundwater sources. EPA's Safe Drinking Water Information System records 118 total violations for this system , of which 0 (0%) are health-based — meaning a contaminant exceeded an EPA Maximum Contaminant Level or a required treatment technique failed. A further 100 monitoring and reporting violations are on file. The most recent violation on record dates to 2021.

The most frequently cited contaminant at this system is Selenium, recorded in 11 violations (MR). This system has not yet been sampled under EPA's UCMR5 PFAS monitoring program, so no PFAS detection data is available here.

Across Iowa, EPA tracks 1,795 public water systems serving 3,114,444 people, with 138,271 cumulative violations and 27,946 health-based violations on record. About 95% of systems in the state carry at least one violation, and state-wide the average per system is 77 violations. BREDA WATER SUPPLY's 118 violations sit above the Iowa average. Statewide, 127 of 152 UCMR5-tested systems have reported PFAS detections (83.6%). All figures above are sourced directly from EPA SDWIS and UCMR5 public data releases and are updated as EPA publishes new reporting cycles.

Population Served
500
Total Violations
118
Health-Based Violations
0
Water Source
Groundwater

System Details

System Type
Community
Owner Type
Local
Connections
267
County
Carroll
School/Daycare
No
MCL Violations
0
Monitoring Violations
100
Treatment Tech Violations
0

Violation History

Contaminant violations recorded by EPA.

Contaminant Category Count Latest
Selenium MR 11 1988
Arsenic MR 11 1988
Fluoride MR 11 1988
Cadmium MR 11 1988
Lead and Copper Rule MR 11 1990
Mercury MR 11 1988
Chromium MR 11 1988
Nitrate MR 9 2020
Barium MR 5 1988
Coliform (TCR) MR 5 2007
Revised Total Coliform Rule MON 4 2016
Consumer Confidence Rule Other 2 2021

Verify This Water System

The figures above are aggregated from EPA's public databases. To verify the underlying records — or to file a complaint, request a Consumer Confidence Report, or check current monitoring status — go directly to the federal and state regulators that enforce the Safe Drinking Water Act for BREDA WATER SUPPLY.

Federal Source of Truth

EPA SDWIS — Federal Reports

EPA's Safe Drinking Water Information System (SDWIS) holds the federal compliance record for every regulated public water system. Open the system-level report by PWS ID:

View PWS ID IA1409041 on SDWIS

Source: EPA SDWIS Federal Reports Search

State Regulator

Iowa Drinking Water Authority

Iowa's primacy agency administers the Safe Drinking Water Act locally. Search EPA SDWIS for the current state contact, or use the state's public health or environment department portal.

Find IA regulator via EPA SDWIS

Violation Timeline

Each row links to the EPA SDWIS public record for verification. Cross-reference the contaminant code on EPA's federal report to see violation dates, return-to-compliance status, and enforcement actions.

Year (latest) Contaminant Category Count EPA Record
2021 Consumer Confidence Rule Other 2 SDWIS / IA1409041 / 7000
2020 Nitrate MR 9 SDWIS / IA1409041 / 1040
2016 Revised Total Coliform Rule MON 4 SDWIS / IA1409041 / 8000
2007 Coliform (TCR) MR 5 SDWIS / IA1409041 / 3100
1990 Lead and Copper Rule MR 11 SDWIS / IA1409041 / 5000
1988 Selenium MR 11 SDWIS / IA1409041 / 1045
1988 Arsenic MR 11 SDWIS / IA1409041 / 1005
1988 Fluoride MR 11 SDWIS / IA1409041 / 1025
1988 Cadmium MR 11 SDWIS / IA1409041 / 1015
1988 Mercury MR 11 SDWIS / IA1409041 / 1035
1988 Chromium MR 11 SDWIS / IA1409041 / 1020
1988 Barium MR 5 SDWIS / IA1409041 / 1010

How BREDA WATER SUPPLY Compares

Cross-reference this system's record against state averages and the federal MCL framework for context.

Metric BREDA WATER SUPPLY Iowa avg Federal benchmark
Total violations 118 77 SDWA compliance — any non-zero count is a recorded breach
Health-based violations 0 15.6 Indicates a contaminant exceeded a federal MCL
PFAS detection None 83.6% EPA final rule (2024): PFOA/PFOS MCL = 4.0 ppt
Population served 500 1,735 Sizing context for compliance burden

Sources: EPA SDWIS and EPA National Primary Drinking Water Regulations (40 CFR Part 141). State averages computed across 1,795 regulated public water systems in Iowa.

Federal MCL reference — Safe Drinking Water Act thresholds
Contaminant Federal MCL / Action Level Note
Lead 0 mg/L (Action Level: 0.015 mg/L) Lead and Copper Rule treatment technique
Arsenic 0.010 mg/L (10 ppb) Health-based MCL since 2006
Total Coliform Treatment technique (RTCR) Indicator organism, monitoring trigger
PFOA / PFOS (PFAS) 4.0 ppt each (final 2024 rule) Compliance deadline 2029
Nitrate (as N) 10 mg/L Acute health risk for infants

Frequently Asked Questions

Is BREDA WATER SUPPLY water safe to drink?
BREDA WATER SUPPLY (PWS ID: IA1409041) has 118 recorded violations in the EPA SDWIS database. No PFAS contamination was detected in UCMR5 testing. This system serves 500 people using Groundwater sources.
How many people does BREDA WATER SUPPLY serve?
BREDA WATER SUPPLY serves 500 people in BREDA, Iowa. It is a Local-owned system using Groundwater water sources with 267 service connections.
What type of violations does BREDA WATER SUPPLY have?
BREDA WATER SUPPLY has 118 total violations: 0 health-based violations (MCL exceedances or treatment failures), 100 monitoring/reporting violations, and 0 treatment technique violations. Health-based violations indicate contaminant levels exceeded EPA safe limits.
Has PFAS been detected in BREDA WATER SUPPLY water?
No PFAS testing data is available for BREDA WATER SUPPLY under the EPA's UCMR5 monitoring program.
What water source does BREDA WATER SUPPLY use?
BREDA WATER SUPPLY uses Groundwater as its primary water source. It is classified as a Community Water System (CWS), serving residential populations year-round.
Where does this data come from?
All data comes from the EPA Safe Drinking Water Information System (SDWIS) and the UCMR5 PFAS monitoring program. SDWIS tracks compliance for all public water systems regulated under the Safe Drinking Water Act.

Explore PlainWater

Data Sources: EPA Safe Drinking Water Information System (SDWIS), Q4 2025. This data is provided for informational purposes only.

Related

Data sourced from $official public datasets. See our methodology for details. Retrieved and formatted by Kiznis Studio Editorial