PlainWater
StatesIowa

GILBERTVILLE WATER WORKS

PWS ID: IA0733084 · GILBERTVILLE, Iowa 50634

GILBERTVILLE WATER WORKS serves 794 people in GILBERTVILLE, Iowa using Groundwater water sources. It has 57 recorded EPA violations, including 0 health-based violations. No PFAS contamination was detected in UCMR5 testing.

Water Quality Snapshot: GILBERTVILLE WATER WORKS

GILBERTVILLE WATER WORKS is a local-owned community water system that delivers drinking water to 794 residents in GILBERTVILLE, Iowa (Black Hawk County) through 348 service connections. Its water is drawn from groundwater sources. EPA's Safe Drinking Water Information System records 57 total violations for this system , of which 0 (0%) are health-based — meaning a contaminant exceeded an EPA Maximum Contaminant Level or a required treatment technique failed. A further 44 monitoring and reporting violations are on file. The most recent violation on record dates to 2018.

The most frequently cited contaminant at this system is Nitrate, recorded in 18 violations (MR). This system has not yet been sampled under EPA's UCMR5 PFAS monitoring program, so no PFAS detection data is available here.

Across Iowa, EPA tracks 1,795 public water systems serving 3,114,444 people, with 138,271 cumulative violations and 27,946 health-based violations on record. About 95% of systems in the state carry at least one violation, and state-wide the average per system is 77 violations. GILBERTVILLE WATER WORKS's 57 violations sit below the Iowa average. Statewide, 127 of 152 UCMR5-tested systems have reported PFAS detections (83.6%). All figures above are sourced directly from EPA SDWIS and UCMR5 public data releases and are updated as EPA publishes new reporting cycles.

Population Served
794
Total Violations
57
Health-Based Violations
0
Water Source
Groundwater

System Details

System Type
Community
Owner Type
Local
Connections
348
County
Black Hawk
School/Daycare
No
MCL Violations
0
Monitoring Violations
44
Treatment Tech Violations
0

Violation History

Contaminant violations recorded by EPA.

Contaminant Category Count Latest
Nitrate MR 18 1994
Gross Alpha, Excl. Radon and U MR 8 1990
Revised Total Coliform Rule MON 4 2018
Arsenic MR 3 1985
Selenium MR 3 1985
Lead and Copper Rule MR 2 1988
Consumer Confidence Rule Other 2 2017
Barium MR 2 1985
Fluoride MR 1 1985
Mercury MR 1 1985
Chromium MR 1 1985
Cadmium MR 1 1985

Verify This Water System

The figures above are aggregated from EPA's public databases. To verify the underlying records — or to file a complaint, request a Consumer Confidence Report, or check current monitoring status — go directly to the federal and state regulators that enforce the Safe Drinking Water Act for GILBERTVILLE WATER WORKS.

Federal Source of Truth

EPA SDWIS — Federal Reports

EPA's Safe Drinking Water Information System (SDWIS) holds the federal compliance record for every regulated public water system. Open the system-level report by PWS ID:

View PWS ID IA0733084 on SDWIS

Source: EPA SDWIS Federal Reports Search

State Regulator

Iowa Drinking Water Authority

Iowa's primacy agency administers the Safe Drinking Water Act locally. Search EPA SDWIS for the current state contact, or use the state's public health or environment department portal.

Find IA regulator via EPA SDWIS

Violation Timeline

Each row links to the EPA SDWIS public record for verification. Cross-reference the contaminant code on EPA's federal report to see violation dates, return-to-compliance status, and enforcement actions.

Year (latest) Contaminant Category Count EPA Record
2018 Revised Total Coliform Rule MON 4 SDWIS / IA0733084 / 8000
2017 Consumer Confidence Rule Other 2 SDWIS / IA0733084 / 7000
1994 Nitrate MR 18 SDWIS / IA0733084 / 1040
1990 Gross Alpha, Excl. Radon and U MR 8 SDWIS / IA0733084 / 4000
1988 Lead and Copper Rule MR 2 SDWIS / IA0733084 / 5000
1985 Arsenic MR 3 SDWIS / IA0733084 / 1005
1985 Selenium MR 3 SDWIS / IA0733084 / 1045
1985 Barium MR 2 SDWIS / IA0733084 / 1010
1985 Fluoride MR 1 SDWIS / IA0733084 / 1025
1985 Mercury MR 1 SDWIS / IA0733084 / 1035
1985 Chromium MR 1 SDWIS / IA0733084 / 1020
1985 Cadmium MR 1 SDWIS / IA0733084 / 1015

How GILBERTVILLE WATER WORKS Compares

Cross-reference this system's record against state averages and the federal MCL framework for context.

Metric GILBERTVILLE WATER WORKS Iowa avg Federal benchmark
Total violations 57 77 SDWA compliance — any non-zero count is a recorded breach
Health-based violations 0 15.6 Indicates a contaminant exceeded a federal MCL
PFAS detection None 83.6% EPA final rule (2024): PFOA/PFOS MCL = 4.0 ppt
Population served 794 1,735 Sizing context for compliance burden

Sources: EPA SDWIS and EPA National Primary Drinking Water Regulations (40 CFR Part 141). State averages computed across 1,795 regulated public water systems in Iowa.

Federal MCL reference — Safe Drinking Water Act thresholds
Contaminant Federal MCL / Action Level Note
Lead 0 mg/L (Action Level: 0.015 mg/L) Lead and Copper Rule treatment technique
Arsenic 0.010 mg/L (10 ppb) Health-based MCL since 2006
Total Coliform Treatment technique (RTCR) Indicator organism, monitoring trigger
PFOA / PFOS (PFAS) 4.0 ppt each (final 2024 rule) Compliance deadline 2029
Nitrate (as N) 10 mg/L Acute health risk for infants

Frequently Asked Questions

Is GILBERTVILLE WATER WORKS water safe to drink?
GILBERTVILLE WATER WORKS (PWS ID: IA0733084) has 57 recorded violations in the EPA SDWIS database. No PFAS contamination was detected in UCMR5 testing. This system serves 794 people using Groundwater sources.
How many people does GILBERTVILLE WATER WORKS serve?
GILBERTVILLE WATER WORKS serves 794 people in GILBERTVILLE, Iowa. It is a Local-owned system using Groundwater water sources with 348 service connections.
What type of violations does GILBERTVILLE WATER WORKS have?
GILBERTVILLE WATER WORKS has 57 total violations: 0 health-based violations (MCL exceedances or treatment failures), 44 monitoring/reporting violations, and 0 treatment technique violations. Health-based violations indicate contaminant levels exceeded EPA safe limits.
Has PFAS been detected in GILBERTVILLE WATER WORKS water?
No PFAS testing data is available for GILBERTVILLE WATER WORKS under the EPA's UCMR5 monitoring program.
What water source does GILBERTVILLE WATER WORKS use?
GILBERTVILLE WATER WORKS uses Groundwater as its primary water source. It is classified as a Community Water System (CWS), serving residential populations year-round.
Where does this data come from?
All data comes from the EPA Safe Drinking Water Information System (SDWIS) and the UCMR5 PFAS monitoring program. SDWIS tracks compliance for all public water systems regulated under the Safe Drinking Water Act.

Explore PlainWater

Data Sources: EPA Safe Drinking Water Information System (SDWIS), Q4 2025. This data is provided for informational purposes only.

Related

Data sourced from $official public datasets. See our methodology for details. Retrieved and formatted by PlainWater Editorial