PlainWater

Non-Transient Non-Community Water System · PWS GA3190006

Kamin-McIntyre Plant

McIntyre, Georgia 31054 - drinking water served from groundwater sources to 250 people, tracked in EPA SDWIS and UCMR5.

250
People served
20
EPA violations
0
Health-based
Untested
UCMR5 result

The verdict

EPA records 20 drinking-water violations at Kamin-McIntyre Plant - below the Georgia per-system average.

20
Total EPA violations on record
0%
Health-based (MCL / treatment failure)
250
People served by this system
N/A
PFAS compounds detected (UCMR5)

Water Quality Snapshot: Kamin-McIntyre Plant

Kamin-McIntyre Plant is a private-owned non-transient non-community water system that delivers drinking water to 250 residents in McIntyre, Georgia (Wilkinson County) through 30 service connections. Its water is drawn from groundwater sources. EPA's Safe Drinking Water Information System records 20 total violations for this system , of which 0 (0%) are health-based, meaning a contaminant exceeded an EPA Maximum Contaminant Level or a required treatment technique failed. A further 18 monitoring and reporting violations are on file. The most recent violation on record dates to 2025.

The most frequently cited contaminant at this system is Lead and Copper Rule, recorded in 9 violations (MR). This system has not yet been sampled under EPA's UCMR5 PFAS monitoring program, so no PFAS detection data is available here.

Across Georgia, EPA tracks 2,382 public water systems serving 10,694,477 people, with 108,966 cumulative violations and 12,032 health-based violations on record. About 92% of systems in the state carry at least one violation, and state-wide the average per system is 45.7 violations. Statewide, 77 of 254 UCMR5-tested systems have reported PFAS detections (30.3%).

Kamin-McIntyre Plant's 20 violations sit below the Georgia average.

All figures above are sourced directly from EPA SDWIS and UCMR5 public data releases and are updated as EPA publishes new reporting cycles.

Population Served
250
Total Violations
20
Health-Based Violations
0
Water Source
Groundwater

System Details

System Type
Non-Transient Non-Community
Owner Type
Private
Connections
30
County
Wilkinson
School/Daycare
No
MCL Violations
0
Monitoring Violations
18
Treatment Tech Violations
0

Violation History

Contaminant violations recorded by EPA.

Contaminant Category Count Latest
Lead and Copper Rule MR 9 2016
Coliform (TCR) MR 5 2013
Revised Total Coliform Rule MON 4 2016
LEAD AND COPPER RULE REVISIONS RPT 1 2025

Verify This Water System

The figures above are aggregated from EPA's public databases. To verify the underlying records, or to file a complaint, request a Consumer Confidence Report, or check current monitoring status, go directly to the federal and state regulators that enforce the Safe Drinking Water Act for Kamin-McIntyre Plant.

Federal Source of Truth

EPA SDWIS, Federal Reports

EPA's Safe Drinking Water Information System (SDWIS) holds the federal compliance record for every regulated public water system. Open the system-level report by PWS ID:

View PWS ID GA3190006 on SDWIS

Source: EPA SDWIS Federal Reports Search

State Regulator

Georgia Drinking Water Authority

Georgia EPD, Drinking Water Program is the primacy agency that licenses and inspects Kamin-McIntyre Plant under EPA-delegated authority.

Open GA regulator portal

Source: Georgia EPD, Drinking Water Program

Violation Timeline

Each row links to the EPA SDWIS public record for verification. Cross-reference the contaminant code on EPA's federal report to see violation dates, return-to-compliance status, and enforcement actions.

Year (latest) Contaminant Category Count EPA Record
2025 LEAD AND COPPER RULE REVISIONS RPT 1 SDWIS / GA3190006 / 5200
2016 Lead and Copper Rule MR 9 SDWIS / GA3190006 / 5000
2016 Revised Total Coliform Rule MON 4 SDWIS / GA3190006 / 8000
2013 Coliform (TCR) MR 5 SDWIS / GA3190006 / 3100

How Kamin-McIntyre Plant Compares

Cross-reference this system's record against state averages and the federal MCL framework for context.

Metric Kamin-McIntyre Plant Georgia avg Federal benchmark
Total violations 20 45.7 SDWA compliance, any non-zero count is a recorded breach
Health-based violations 0 5.1 Indicates a contaminant exceeded a federal MCL
PFAS detection None 30.3% EPA final rule (2024): PFOA/PFOS MCL = 4.0 ppt
Population served 250 4,490 Sizing context for compliance burden

Sources: EPA SDWIS and EPA National Primary Drinking Water Regulations (40 CFR Part 141). State averages computed across 2,382 regulated public water systems in Georgia.

Federal MCL reference, Safe Drinking Water Act thresholds
Contaminant Federal MCL / Action Level Note
Lead 0 mg/L (Action Level: 0.015 mg/L) Lead and Copper Rule treatment technique
Arsenic 0.010 mg/L (10 ppb) Health-based MCL since 2006
Total Coliform Treatment technique (RTCR) Indicator organism, monitoring trigger
PFOA / PFOS (PFAS) 4.0 ppt each (final 2024 rule) Compliance deadline 2029 (EPA proposed extending to 2031, not yet final as of May 2026)
Nitrate (as N) 10 mg/L Acute health risk for infants

Frequently Asked Questions

Is Kamin-McIntyre Plant water safe to drink?
Kamin-McIntyre Plant (PWS ID: GA3190006) has 20 recorded violations in the EPA SDWIS database. No PFAS contamination was detected in UCMR5 testing. This system serves 250 people using Groundwater sources.
How many people does Kamin-McIntyre Plant serve?
Kamin-McIntyre Plant serves 250 people in McIntyre, Georgia. It is a Private-owned system using Groundwater water sources with 30 service connections.
What type of violations does Kamin-McIntyre Plant have?
Kamin-McIntyre Plant has 20 total violations: 0 health-based violations (MCL exceedances or treatment failures), 18 monitoring/reporting violations, and 0 treatment technique violations. Health-based violations indicate contaminant levels exceeded EPA safe limits.
Has PFAS been detected in Kamin-McIntyre Plant water?
No PFAS testing data is available for Kamin-McIntyre Plant under the EPA's UCMR5 monitoring program.
What water source does Kamin-McIntyre Plant use?
Kamin-McIntyre Plant uses Groundwater as its primary water source. It is classified as a Non-Transient Non-Community Water System, serving the same people for at least 6 months per year.
Where does this data come from?
All data comes from the EPA Safe Drinking Water Information System (SDWIS) and the UCMR5 PFAS monitoring program. SDWIS tracks compliance for all public water systems regulated under the Safe Drinking Water Act.
Data Sources: EPA Safe Drinking Water Information System (SDWIS), Q4 2025. This data is provided for informational purposes only.
Data sourced from EPA SDWIS and UCMR5 PFAS monitoring data. See our methodology for details. Retrieved and formatted by PlainWater Editorial

Every figure on PlainWater is rendered directly from EPA SDWIS drinking-water data, no number is typed in by an editor. This system's figures are rendered directly from EPA SDWIS data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.