PlainWater

Non-Transient Non-Community Water System · PWS DE0001303

Mountaire-Millsboro

Millsboro, Delaware 19966 - drinking water served from groundwater sources to 1,200 people, tracked in EPA SDWIS and UCMR5.

1,200
People served
93
EPA violations
65
Health-based
Untested
UCMR5 result

The verdict

EPA records 93 drinking-water violations at Mountaire-Millsboro, 70% of them health-based - above the Delaware per-system average.

93
Total EPA violations on record
70%
Health-based (MCL / treatment failure)
1,200
People served by this system
N/A
PFAS compounds detected (UCMR5)

Water Quality Snapshot: Mountaire-Millsboro

Mountaire-Millsboro is a private-owned non-transient non-community water system that delivers drinking water to 1,200 residents in Millsboro, Delaware (Sussex County) through 10 service connections. Its water is drawn from groundwater sources. EPA's Safe Drinking Water Information System records 93 total violations for this system , of which 65 (70%) are health-based, meaning a contaminant exceeded an EPA Maximum Contaminant Level or a required treatment technique failed. A further 6 monitoring and reporting violations are on file. The most recent violation on record dates to 2010.

The most frequently cited contaminant at this system is Nitrate, recorded in 61 violations (MCL, health-based). This system has not yet been sampled under EPA's UCMR5 PFAS monitoring program, so no PFAS detection data is available here.

Across Delaware, EPA tracks 460 public water systems serving 1,083,630 people, with 9,105 cumulative violations and 4,582 health-based violations on record. About 75% of systems in the state carry at least one violation, and state-wide the average per system is 19.8 violations. Statewide, 25 of 35 UCMR5-tested systems have reported PFAS detections (71.4%).

Mountaire-Millsboro's 93 violations sit above the Delaware average.

All figures above are sourced directly from EPA SDWIS and UCMR5 public data releases and are updated as EPA publishes new reporting cycles.

Population Served
1,200
Total Violations
93
Health-Based Violations
65
Water Source
Groundwater

System Details

System Type
Non-Transient Non-Community
Owner Type
Private
Connections
10
County
Sussex
School/Daycare
No
MCL Violations
65
Monitoring Violations
6
Treatment Tech Violations
0

Violation History

Contaminant violations recorded by EPA.

Contaminant Category Count Latest
Nitrate MCL 61 1993
Lead and Copper Rule MR 4 2010
Coliform (TCR) MCL 4 2010
Nitrate MR 2 1992

Verify This Water System

The figures above are aggregated from EPA's public databases. To verify the underlying records, or to file a complaint, request a Consumer Confidence Report, or check current monitoring status, go directly to the federal and state regulators that enforce the Safe Drinking Water Act for Mountaire-Millsboro.

Federal Source of Truth

EPA SDWIS, Federal Reports

EPA's Safe Drinking Water Information System (SDWIS) holds the federal compliance record for every regulated public water system. Open the system-level report by PWS ID:

View PWS ID DE0001303 on SDWIS

Source: EPA SDWIS Federal Reports Search

State Regulator

Delaware Drinking Water Authority

Delaware's primacy agency administers the Safe Drinking Water Act locally. Search EPA SDWIS for the current state contact, or use the state's public health or environment department portal.

Find DE regulator via EPA SDWIS

Violation Timeline

Each row links to the EPA SDWIS public record for verification. Cross-reference the contaminant code on EPA's federal report to see violation dates, return-to-compliance status, and enforcement actions.

Year (latest) Contaminant Category Count EPA Record
2010 Lead and Copper Rule MR 4 SDWIS / DE0001303 / 5000
2010 Coliform (TCR) MCL 4 SDWIS / DE0001303 / 3100
1993 Nitrate MCL 61 SDWIS / DE0001303 / 1040
1992 Nitrate MR 2 SDWIS / DE0001303 / 1040

How Mountaire-Millsboro Compares

Cross-reference this system's record against state averages and the federal MCL framework for context.

Metric Mountaire-Millsboro Delaware avg Federal benchmark
Total violations 93 19.8 SDWA compliance, any non-zero count is a recorded breach
Health-based violations 65 10 Indicates a contaminant exceeded a federal MCL
PFAS detection None 71.4% EPA final rule (2024): PFOA/PFOS MCL = 4.0 ppt
Population served 1,200 2,356 Sizing context for compliance burden

Sources: EPA SDWIS and EPA National Primary Drinking Water Regulations (40 CFR Part 141). State averages computed across 460 regulated public water systems in Delaware.

Federal MCL reference, Safe Drinking Water Act thresholds
Contaminant Federal MCL / Action Level Note
Lead 0 mg/L (Action Level: 0.015 mg/L) Lead and Copper Rule treatment technique
Arsenic 0.010 mg/L (10 ppb) Health-based MCL since 2006
Total Coliform Treatment technique (RTCR) Indicator organism, monitoring trigger
PFOA / PFOS (PFAS) 4.0 ppt each (final 2024 rule) Compliance deadline 2029 (EPA proposed extending to 2031, not yet final as of May 2026)
Nitrate (as N) 10 mg/L Acute health risk for infants

Frequently Asked Questions

Is Mountaire-Millsboro water safe to drink?
Mountaire-Millsboro (PWS ID: DE0001303) has 93 recorded violations in the EPA SDWIS database. No PFAS contamination was detected in UCMR5 testing. This system serves 1,200 people using Groundwater sources.
How many people does Mountaire-Millsboro serve?
Mountaire-Millsboro serves 1,200 people in Millsboro, Delaware. It is a Private-owned system using Groundwater water sources with 10 service connections.
What type of violations does Mountaire-Millsboro have?
Mountaire-Millsboro has 93 total violations: 65 health-based violations (MCL exceedances or treatment failures), 6 monitoring/reporting violations, and 0 treatment technique violations. Health-based violations indicate contaminant levels exceeded EPA safe limits.
Has PFAS been detected in Mountaire-Millsboro water?
No PFAS testing data is available for Mountaire-Millsboro under the EPA's UCMR5 monitoring program.
What water source does Mountaire-Millsboro use?
Mountaire-Millsboro uses Groundwater as its primary water source. It is classified as a Non-Transient Non-Community Water System, serving the same people for at least 6 months per year.
Where does this data come from?
All data comes from the EPA Safe Drinking Water Information System (SDWIS) and the UCMR5 PFAS monitoring program. SDWIS tracks compliance for all public water systems regulated under the Safe Drinking Water Act.
Data Sources: EPA Safe Drinking Water Information System (SDWIS), Q4 2025. This data is provided for informational purposes only.
Data sourced from EPA SDWIS and UCMR5 PFAS monitoring data. See our methodology for details. Retrieved and formatted by PlainWater Editorial

Every figure on PlainWater is rendered directly from EPA SDWIS drinking-water data, no number is typed in by an editor. This system's figures are rendered directly from EPA SDWIS data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.