PlainWater

BLANTON'S MANUFACTURED HOME COMMUNITY

PWS ID: DE0000987 · FELTON, Delaware 19943

BLANTON'S MANUFACTURED HOME COMMUNITY serves 75 people in FELTON, Delaware using Groundwater water sources. It has 73 recorded EPA violations, including 30 health-based violations. No PFAS contamination was detected in UCMR5 testing.

Water Quality Snapshot: BLANTON'S MANUFACTURED HOME COMMUNITY

BLANTON'S MANUFACTURED HOME COMMUNITY is a private-owned community water system that delivers drinking water to 75 residents in FELTON, Delaware (Kent County) through 30 service connections. Its water is drawn from groundwater sources. EPA's Safe Drinking Water Information System records 73 total violations for this system , of which 30 (41%) are health-based — meaning a contaminant exceeded an EPA Maximum Contaminant Level or a required treatment technique failed. A further 18 monitoring and reporting violations are on file. The most recent violation on record dates to 2019.

The most frequently cited contaminant at this system is Coliform (TCR), recorded in 30 violations (MCL, health-based). This system has not yet been sampled under EPA's UCMR5 PFAS monitoring program, so no PFAS detection data is available here.

Across Delaware, EPA tracks 460 public water systems serving 1,083,630 people, with 9,105 cumulative violations and 4,582 health-based violations on record. About 75% of systems in the state carry at least one violation, and state-wide the average per system is 19.8 violations. BLANTON'S MANUFACTURED HOME COMMUNITY's 73 violations sit above the Delaware average. Statewide, 25 of 35 UCMR5-tested systems have reported PFAS detections (71.4%). All figures above are sourced directly from EPA SDWIS and UCMR5 public data releases and are updated as EPA publishes new reporting cycles.

Population Served
75
Total Violations
73
Health-Based Violations
30
Water Source
Groundwater

System Details

System Type
Community
Owner Type
Private
Connections
30
County
Kent
School/Daycare
No
MCL Violations
30
Monitoring Violations
18
Treatment Tech Violations
0

Violation History

Contaminant violations recorded by EPA.

Contaminant Category Count Latest
Coliform (TCR) MCL 30 2013
Lead and Copper Rule MR 18 2019
Consumer Confidence Rule Other 4 2010
Public Notice Other 3 2012

Verify This Water System

The figures above are aggregated from EPA's public databases. To verify the underlying records — or to file a complaint, request a Consumer Confidence Report, or check current monitoring status — go directly to the federal and state regulators that enforce the Safe Drinking Water Act for BLANTON'S MANUFACTURED HOME COMMUNITY.

Federal Source of Truth

EPA SDWIS — Federal Reports

EPA's Safe Drinking Water Information System (SDWIS) holds the federal compliance record for every regulated public water system. Open the system-level report by PWS ID:

View PWS ID DE0000987 on SDWIS

Source: EPA SDWIS Federal Reports Search

State Regulator

Delaware Drinking Water Authority

Delaware's primacy agency administers the Safe Drinking Water Act locally. Search EPA SDWIS for the current state contact, or use the state's public health or environment department portal.

Find DE regulator via EPA SDWIS

Violation Timeline

Each row links to the EPA SDWIS public record for verification. Cross-reference the contaminant code on EPA's federal report to see violation dates, return-to-compliance status, and enforcement actions.

Year (latest) Contaminant Category Count EPA Record
2019 Lead and Copper Rule MR 18 SDWIS / DE0000987 / 5000
2013 Coliform (TCR) MCL 30 SDWIS / DE0000987 / 3100
2012 Public Notice Other 3 SDWIS / DE0000987 / 7500
2010 Consumer Confidence Rule Other 4 SDWIS / DE0000987 / 7000

How BLANTON'S MANUFACTURED HOME COMMUNITY Compares

Cross-reference this system's record against state averages and the federal MCL framework for context.

Metric BLANTON'S MANUFACTURED HOME COMMUNITY Delaware avg Federal benchmark
Total violations 73 19.8 SDWA compliance — any non-zero count is a recorded breach
Health-based violations 30 10 Indicates a contaminant exceeded a federal MCL
PFAS detection None 71.4% EPA final rule (2024): PFOA/PFOS MCL = 4.0 ppt
Population served 75 2,356 Sizing context for compliance burden

Sources: EPA SDWIS and EPA National Primary Drinking Water Regulations (40 CFR Part 141). State averages computed across 460 regulated public water systems in Delaware.

Federal MCL reference — Safe Drinking Water Act thresholds
Contaminant Federal MCL / Action Level Note
Lead 0 mg/L (Action Level: 0.015 mg/L) Lead and Copper Rule treatment technique
Arsenic 0.010 mg/L (10 ppb) Health-based MCL since 2006
Total Coliform Treatment technique (RTCR) Indicator organism, monitoring trigger
PFOA / PFOS (PFAS) 4.0 ppt each (final 2024 rule) Compliance deadline 2029
Nitrate (as N) 10 mg/L Acute health risk for infants

Frequently Asked Questions

Is BLANTON'S MANUFACTURED HOME COMMUNITY water safe to drink?
BLANTON'S MANUFACTURED HOME COMMUNITY (PWS ID: DE0000987) has 73 recorded violations in the EPA SDWIS database. No PFAS contamination was detected in UCMR5 testing. This system serves 75 people using Groundwater sources.
How many people does BLANTON'S MANUFACTURED HOME COMMUNITY serve?
BLANTON'S MANUFACTURED HOME COMMUNITY serves 75 people in FELTON, Delaware. It is a Private-owned system using Groundwater water sources with 30 service connections.
What type of violations does BLANTON'S MANUFACTURED HOME COMMUNITY have?
BLANTON'S MANUFACTURED HOME COMMUNITY has 73 total violations: 30 health-based violations (MCL exceedances or treatment failures), 18 monitoring/reporting violations, and 0 treatment technique violations. Health-based violations indicate contaminant levels exceeded EPA safe limits.
Has PFAS been detected in BLANTON'S MANUFACTURED HOME COMMUNITY water?
No PFAS testing data is available for BLANTON'S MANUFACTURED HOME COMMUNITY under the EPA's UCMR5 monitoring program.
What water source does BLANTON'S MANUFACTURED HOME COMMUNITY use?
BLANTON'S MANUFACTURED HOME COMMUNITY uses Groundwater as its primary water source. It is classified as a Community Water System (CWS), serving residential populations year-round.
Where does this data come from?
All data comes from the EPA Safe Drinking Water Information System (SDWIS) and the UCMR5 PFAS monitoring program. SDWIS tracks compliance for all public water systems regulated under the Safe Drinking Water Act.

Explore PlainWater

Data Sources: EPA Safe Drinking Water Information System (SDWIS), Q4 2025. This data is provided for informational purposes only.

Related

Data sourced from $official public datasets. See our methodology for details. Retrieved and formatted by Kiznis Studio Editorial