PlainWater

Non-Transient Non-Community Water System · PWS 063005728

Osage Nation Industrial Park

EPA Region 6 — Tribal Water Systems - drinking water served from surface water sources to 250 people, tracked in EPA SDWIS and UCMR5.

250
People served
5
EPA violations
3
Health-based
Untested
UCMR5 result

The verdict

EPA records 5 drinking-water violations at Osage Nation Industrial Park, 60% of them health-based.

5
Total EPA violations on record
60%
Health-based (MCL / treatment failure)
250
People served by this system
N/A
PFAS compounds detected (UCMR5)

Water Quality Snapshot: Osage Nation Industrial Park

Osage Nation Industrial Park is a native american-owned non-transient non-community water system that delivers drinking water to 250 residents in EPA Region 6 — Tribal Water Systems through 5 service connections. Its water is drawn from surface water sources. EPA's Safe Drinking Water Information System records 5 total violations for this system , of which 3 (60%) are health-based, meaning a contaminant exceeded an EPA Maximum Contaminant Level or a required treatment technique failed. A further 2 monitoring and reporting violations are on file. The most recent violation on record dates to 2025.

The most frequently cited contaminant at this system is TTHM, recorded in 3 violations (MCL, health-based). This system has not yet been sampled under EPA's UCMR5 PFAS monitoring program, so no PFAS detection data is available here.

EPA Region 6 — Tribal Water Systems has thousands of regulated public water systems tracked by EPA under the Safe Drinking Water Act.

All figures above are sourced directly from EPA SDWIS and UCMR5 public data releases and are updated as EPA publishes new reporting cycles.

Population Served
250
Total Violations
5
Health-Based Violations
3
Water Source
Surface Water

System Details

System Type
Non-Transient Non-Community
Owner Type
Native American
Connections
5
School/Daycare
No
MCL Violations
3
Monitoring Violations
2
Treatment Tech Violations
0

Violation History

Contaminant violations recorded by EPA.

Contaminant Category Count Latest
TTHM MCL 3 2025
Lead and Copper Rule MR 2 2024

Verify This Water System

The figures above are aggregated from EPA's public databases. To verify the underlying records, or to file a complaint, request a Consumer Confidence Report, or check current monitoring status, go directly to the federal and state regulators that enforce the Safe Drinking Water Act for Osage Nation Industrial Park.

Federal Source of Truth

EPA SDWIS, Federal Reports

EPA's Safe Drinking Water Information System (SDWIS) holds the federal compliance record for every regulated public water system. Open the system-level report by PWS ID:

View PWS ID 063005728 on SDWIS

Source: EPA SDWIS Federal Reports Search

State Regulator

EPA Region 6 — Tribal Water Systems Drinking Water Authority

EPA Region 6 — Tribal Water Systems's primacy agency administers the Safe Drinking Water Act locally. Search EPA SDWIS for the current state contact, or use the state's public health or environment department portal.

Find 06 regulator via EPA SDWIS

Violation Timeline

Each row links to the EPA SDWIS public record for verification. Cross-reference the contaminant code on EPA's federal report to see violation dates, return-to-compliance status, and enforcement actions.

Year (latest) Contaminant Category Count EPA Record
2025 TTHM MCL 3 SDWIS / 063005728 / 2950
2024 Lead and Copper Rule MR 2 SDWIS / 063005728 / 5000

How Osage Nation Industrial Park Compares

Cross-reference this system's record against state averages and the federal MCL framework for context.

Metric Osage Nation Industrial Park EPA Region 6 — Tribal Water Systems avg Federal benchmark
Total violations 5 - SDWA compliance, any non-zero count is a recorded breach
Health-based violations 3 - Indicates a contaminant exceeded a federal MCL
PFAS detection None - EPA final rule (2024): PFOA/PFOS MCL = 4.0 ppt
Population served 250 - Sizing context for compliance burden

Sources: EPA SDWIS and EPA National Primary Drinking Water Regulations (40 CFR Part 141). State averages computed across all regulated public water systems in EPA Region 6 — Tribal Water Systems.

Federal MCL reference, Safe Drinking Water Act thresholds
Contaminant Federal MCL / Action Level Note
Lead 0 mg/L (Action Level: 0.015 mg/L) Lead and Copper Rule treatment technique
Arsenic 0.010 mg/L (10 ppb) Health-based MCL since 2006
Total Coliform Treatment technique (RTCR) Indicator organism, monitoring trigger
PFOA / PFOS (PFAS) 4.0 ppt each (final 2024 rule) Compliance deadline 2029 (EPA proposed extending to 2031, not yet final as of May 2026)
Nitrate (as N) 10 mg/L Acute health risk for infants

Frequently Asked Questions

Is Osage Nation Industrial Park water safe to drink?
Osage Nation Industrial Park (PWS ID: 063005728) has 5 recorded violations in the EPA SDWIS database. No PFAS contamination was detected in UCMR5 testing. This system serves 250 people using Surface Water sources.
How many people does Osage Nation Industrial Park serve?
Osage Nation Industrial Park serves 250 people in EPA Region 6 — Tribal Water Systems. It is a Native American-owned system using Surface Water water sources with 5 service connections.
What type of violations does Osage Nation Industrial Park have?
Osage Nation Industrial Park has 5 total violations: 3 health-based violations (MCL exceedances or treatment failures), 2 monitoring/reporting violations, and 0 treatment technique violations. Health-based violations indicate contaminant levels exceeded EPA safe limits.
Has PFAS been detected in Osage Nation Industrial Park water?
No PFAS testing data is available for Osage Nation Industrial Park under the EPA's UCMR5 monitoring program.
What water source does Osage Nation Industrial Park use?
Osage Nation Industrial Park uses Surface Water as its primary water source. It is classified as a Non-Transient Non-Community Water System, serving the same people for at least 6 months per year.
Where does this data come from?
All data comes from the EPA Safe Drinking Water Information System (SDWIS) and the UCMR5 PFAS monitoring program. SDWIS tracks compliance for all public water systems regulated under the Safe Drinking Water Act.
Data Sources: EPA Safe Drinking Water Information System (SDWIS), Q4 2025. This data is provided for informational purposes only.
Data sourced from EPA SDWIS and UCMR5 PFAS monitoring data. See our methodology for details. Retrieved and formatted by PlainWater Editorial

Every figure on PlainWater is rendered directly from EPA SDWIS drinking-water data, no number is typed in by an editor. This system's figures are rendered directly from EPA SDWIS data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.